ActiveImaging HD 2-in-1 depth sounder.

The Lowrance ActiveImaging HD 2-in-1 transducer integrates SideScan Imaging and DownScan Imaging technologies. It is designed to provide high-definition underwater detection, enhancing the clarity of structures and fish beneath your vessel.

For the DownScan function, the ActiveImaging HD 2-in-1 transducer operates on two distinct CHIRP frequencies: 700 kHz CHIRP and 1200 kHz CHIRP. These high frequencies enable detailed visualization of structures beneath the boat.

The ActiveImaging HD 2-in-1 transducer uses 455 kHz CHIRP and 1075 kHz CHIRP frequencies for SideScan imaging, providing a clear side view of structures and fish on either side of your boat.

No, the ActiveImaging HD 2-in-1 dual-beam transducer does not include the FishReveal function for SideScan or DownScan. This feature is available only on ActiveImaging HD 3-in-1 FishReveal models.

The ActiveImaging HD 2-in-1 transducer is directly compatible with Lowrance HDS PRO and Simrad NSS4 displays. For these models, a direct connection is possible without an additional module.

Yes, if you own a Lowrance HDS Live, Carbon, Elite FS or Simrad NSS evo3(S) / NSOevo3(S) display, an S3100 sonar module is required to connect and use the ActiveImaging HD 2-in-1 transducer.

The ActiveImaging HD 2-in-1 transducer comes with a 7.6 m (25 ft) cable, providing sufficient flexibility for most installations.

The ActiveImaging HD 2-in-1 transducer features a 9-pin connector, ensuring a secure and reliable connection to your compatible fishfinder system.

The ActiveImaging HD 2-in-1 transducer can be installed using several mounting options, including transom-mount and transom-skirt mount. The mounting kit required for transom-mount installation is included.

The mounting kit included with the ActiveImaging HD 2-in-1 transducer contains:

3 #10 x 1-1/4" back-mount screws for transom3 flat washers #10 for back-mount screws2 M6 flange-head assembly bolts for bracket2 M6 flange nuts for bracket assembly6 M4 transducer mounting screws6 M4 transducer mounting washers2 cable ties

For installing the transducer, you will need the following tools and supplies (not included):

A drillA 3 mm (1/8") bitA Phillips screwdriverA high-quality marine adhesive/sealant for below-waterline applicationsTwo 10 mm wrenches

The ActiveImaging HD 2-in-1 transducer is designed to operate within a temperature range of -15°C to +55°C (+5°F to +131°F).

The weight of the ActiveImaging HD 2-in-1 transducer is approximately 1.2 kg (2.64 lbs).

For optimal imaging quality, the DownScan and SideScan functions of the ActiveImaging HD 2-in-1 transducer are recommended for a maximum operating speed of 9 knots (10 mph). Beyond this, image quality may degrade.

The maximum side-scan (SideScan) sweep depth is 91 meters at 455 kHz and 46 meters at 1075 kHz, providing wide lateral coverage to detect structures and fish.

Direct compatibility is ensured with Lowrance HDS PRO and Simrad NSS4 displays. For Lowrance HDS Live, Carbon, Elite FS, and Simrad NSS evo3(S) / NSOevo3(S) displays, an S3100 sonar module is required. For other models not specifically mentioned, compatibility is not guaranteed by available information, and it is advisable to consult your device's specific documentation or Lowrance support.

Yes, in addition to SideScan and DownScan imaging capabilities, the ActiveImaging HD 2-in-1 fishfinder also provides water temperature data, displayed on your compatible display.

The ActiveImaging HD 2-in-1 transducer complies with the following standards and certifications: CE (EMC Directive 2014/30/EU), UKCA, and the 2017 radiocommunications standard for Australia and New Zealand.

Yes, the ActiveImaging HD 2-in-1 transducer is designed to complement existing CHIRP sounder systems. It focuses on high-frequency SideScan and DownScan imaging, leaving you free to select other transducer options for traditional/CHIRP sonar.