BOTTOM PLATE, PEDAL kit

The Lowrance (000-15304-001) lower pedal base kit is a replacement or repair solution specifically designed for the Lowrance Ghost bow thruster pedal. It provides the essential components for servicing the lower section of the pedal.

The kit includes the following components:

1x lower pedal plate2x M5x10 mm screws, hex head with pan, stainless steel SS3168x #6x3/4 screws, Torx head with pan, stainless steel (SS)4x rubber feet for the pedal

The four rubber feet included in the kit are designed for the pedal, ensuring its stability and providing protection.

The two M5x10 mm screws provided in the kit are made of SS316 stainless steel. This material offers increased corrosion resistance, particularly suited to a marine environment.

Yes, the eight screws #6 x 3/4 included in the kit are made of stainless steel (SS), providing good corrosion resistance.

Yes, this kit is an original Lowrance part, identified by SKU 000-15304-001, ensuring compatibility and optimal quality with your Lowrance equipment.

The weight of this kit is 0.5 kg.

Yes, the lower plate is a structural component of the pedal. Replacing it maintains the reliability and proper operation of the Lowrance Ghost electric motor pedal.

This kit is designed exclusively for the Lowrance Ghost electric motor pedal.

No, this kit is specifically designed for the Lowrance Ghost electric motor pedal and is not compatible with other Lowrance pedal models.

Yes, the pedal for the Lowrance Ghost electric motor is the same regardless of shaft length (47, 52 or 60 inches). This kit is therefore compatible with all Ghost motor versions.

The kit is designed for the pedal of the Lowrance Ghost electric motor. Although the Ghost X is part of the Ghost series, the product description specifies Lowrange Ghost. For confirmed compatibility with the Ghost X, it is recommended to check the Ghost X specific documentation or contact the manufacturer.

For installing this kit, you will need the appropriate tools for M5x10 mm hex screws and #6x3/4 Torx screws. A set of hex keys and Torx screwdrivers will be required.

Yes, it is essential to disconnect the electric motor power supply before any work on the pedal, including replacing the lower plate. This ensures your safety and protects the equipment.

The lower pedal mounting plate kit is a spare part. It is recommended to refer to the installation and user manual of your Lowrance Ghost electric motor for pedal assembly and maintenance instructions.

When tightening the screws, it is important not to overtighten them to avoid damaging the components. Tighten them firmly but without forcing, referring to the torque specifications if available in the Ghost engine manual.

It is recommended to check the electrical terminals of the pedal once a year to ensure the screws are not loose. If necessary, reapply Tef-Gel® on the terminals.

No, this kit is specifically designed to replace the lower plate and rubber feet of the pedal, as well as the associated screws. Performance issues such as sticking or stuttering of the indicator typically require cleaning the indicator itself, as described in the Ghost motor user manual.

Replacing the lower pedal plate should not require recalibrating the pedal. Recalibration is typically needed after a factory reset of the electric motor or to correct heading or bow offset issues, which are unrelated to replacing physical components of the pedal base.

The pedal base plate is the foundation of the foot pedal unit, the part you press with your feet and which includes the rubber pads. It is located beneath the internal mechanisms of the pedal.