PCBA, Potted Assembly kit

This is an essential spare part designed for the Lowrance Ghost electric motor pedal. The kit includes the main encapsulated controller assembly, as well as clamps, heat-shrink tubing, and screws to facilitate installation.

The "potted" design (encapsulated) means the electronic components of the main controller assembly are embedded in a protective compound. This feature provides increased resistance to marine environmental factors such as humidity, vibrations, and shocks, thereby contributing to the durability of the part under demanding conditions.

The PCBA kit, Potted Assembly Lowrance 000-15303-001, includes the following components:

1x main encapsulated controller assembly for the pedal
1x clamp and heat-shrink tubing kit
6x M2.5 x 10 T8 PT THR screws

The pedal controller assembly is the central component that manages the commands for the Lowrance Ghost electric motor pedal. It ensures communication with the motor and compatible multifunction displays, enabling precise steering and access to the fishfinder's features.

Yes, the "potted" (encapsulated) design of the main controller assembly effectively protects the electronic components against marine environmental factors, including moisture, saltwater spray, vibrations, and shocks. This ensures enhanced durability and reliability in marine environments.

This PCBA, Potted Assembly kit is specifically designed as a spare part for the pedal of Lowrance Ghost electric bow thrusters.

A compatible multifunction display (MFD) from Lowrance is required to display the electric motor sounder data. Compatible models include the Lowrance HDS Pro, HDS Live, HDS Carbon, or Elite FS series, provided they are running the latest software.

Yes, integrating this part allows the Lowrance Ghost engine to maintain its essential connectivity features. This includes NMEA 2000 and Bluetooth connectivity, which are critical for autopilot control and data display via a compatible multifunction display.

The Lowrance Ghost bow thruster motor, for which this kit is a spare part, can be powered by a 24 V DC or 36 V DC system.

Yes, the Lowrance Ghost bow thruster is compatible with NMEA 2000 connectivity. It uses a Micro-C connector for integration into the network, enabling communication with other compatible marine electronic devices.

The Lowrance Ghost bow thruster is equipped with a depth sounder connector of the mini 9-pin type.

Yes, the Lowrance Ghost bow thruster has built-in Bluetooth connectivity, enabling wireless pairing and communication with compatible devices.

The kit is designed as a replacement part for the Lowrance Ghost motor pedal and includes the components required for assembly. However, installing electronic components may require specific technical skills. It is strongly recommended to consult the Lowrance Ghost electric motor installation and user manual for detailed instructions or to hire a qualified technician if you are unsure about the procedure.

Yes, when installing or handling cables, it is critical not to bend them too sharply. It is also recommended to include service loops to ensure cable longevity and proper operation, avoiding unnecessary tension and facilitating maintenance.

The PCBA kit, Potted Assembly Lowrance 000-15303-001, includes six M2.5 x 10 T8 PT THR screws, which are specifically intended for assembling the autopilot control pedal.

After replacing key components such as the controller assembly, or if a factory reset of the bow thruster’s electric motor is performed, the bow thruster’s offset must be recalibrated. The pedal buttons will also need to be reconfigured, and the battery voltage checked to ensure optimal operation.

To ensure proper operation and durability of the pedal’s electrical connections, it is recommended to check annually that the terminal screws are not loose. If necessary, reapply Tef-Gel® on the terminals to prevent corrosion and ensure a reliable electrical connection.

If the rudder direction indicator on the autopilot pedal is stuck or jittering, clean it. To do so, carefully pry off the indicator using a flat screwdriver, then clean it thoroughly, for example with isopropyl alcohol.

The PCBA, Potted Assembly kit is a spare part. Detailed mounting instructions for its integration into the Lowrance Ghost electric motor pedal are typically found in the full Lowrance Ghost installation and user manual, not in a separate manual supplied with this kit.

The PCBA kit, Lowrance 000-15303-001 Potted Assembly, is specifically designed as a replacement part for the Lowrance Ghost electric bow thruster pedal.

This kit ensures the proper operation of the Ghost pedal’s main controller. It includes the encapsulated main controller assembly, cable ties, heat-shrink tubing, and six M2.5 x 10 T8 PT THR screws.

The encapsulated assembly provides increased resistance to moisture, vibrations, and shocks, thereby extending the part’s durability in a marine environment.

The Lowrance Ghost electric bow thruster, for which this part is intended, is compatible with the following Lowrance multifunction displays, provided they have the latest software:

Lowrance HDS Pro
Lowrance HDS Live
Lowrance HDS Carbon
Lowrance Elite FS
The integration of this kit allows the Ghost thruster to maintain its NMEA 2000 and Bluetooth connectivity features.