Power cable and battery kit

The BATTERY kit Lowrance (000-15323-001) power cable kit contains the following items:

One (1) power cableTwo (2) M5 x 10 mm hex head screws

The weight of this Lowrance power cable kit is 0.4 kg.

This Lowrance power cable kit is manufactured in Mexico.

This power cable is an essential connection accessory designed to provide reliable electrical power to your Lowrance marine electronic equipment.

The cable included in the kit is designed for systems requiring a 24 V DC or 36 V DC power supply. It can handle a nominal current of 50 A and a voltage range of 16 to 46 V, making it suitable for electric motors and other marine equipment compatible with Lowrance.

This power cable is compatible with Lowrance marine electronics requiring 24 V DC or 36 V DC power, such as Lowrance Ghost bow thrusters. It is designed to integrate into a system including Lowrance HDS Pro, HDS Live, HDS Carbon, or Elite FS multifunction displays running the latest software.

No, this power cable is specifically designed for 24 V DC or 36 V DC electrical systems, with a voltage range of 16 to 46 V. It is not recommended for use with 12 V DC systems, as it may not provide adequate power or be incompatible with the device's requirements.

This power cable is rated for a nominal current of 50 A. Ensure your electrical system does not exceed this amperage to maintain safe and reliable operation.

Yes, this power cable is fully suitable for Lowrance Ghost bow motors, as these motors require a 24 V DC or 36 V DC power supply and a rated current of 50 A, which matches the specifications of this kit.

Although the cable is a standard component, it is specifically designed and tested for Lowrance equipment. For equipment from other brands, it is essential to check the power specifications (voltage, current) and the required connector type to ensure compatibility and safety. Use with non-Lowrance products is not guaranteed.

During installation, it is recommended to provide drip loops and maintenance loops for cables. It is also crucial to avoid sharp bends or tight turns in the cable to preserve its integrity and ensure long-term performance of the electrical connection.

To avoid damaging the cable, do not make sharp bends or tight turns. Ensure the cable is not pinched or subjected to excessive tension. Creating service loops and maintaining slack helps protect the cable from mechanical stress and moisture.

Yes, regular inspection of connections and the overall condition of cables is strongly recommended. This ensures that terminals are not corroded or dirty and that terminal screws are not loose, helping to maintain the integrity and safety of your boat's electrical system.

The kit includes two M5 x 10 mm hex bolts. These bolts are intended for installing and securely fastening the power cable or other associated components, ensuring a stable and reliable connection.

Yes, it is strongly recommended to use an appropriate circuit breaker with this power cable to protect your electrical system from overcurrents. For example, the Ghost electric motor manual recommends a 50 A circuit breaker for a 24 V or 36 V system.

For Lowrance systems, the black wire is typically the negative (negative DC) and the red wire is the positive (positive DC). It is critical to respect this polarity during installation to ensure proper operation of the equipment and avoid any damage.

To clean the electrical terminals, you can use fine-grit sandpaper or emery cloth to remove any corrosion or dirt. It is also recommended to apply Tef-Gel® to the terminals if necessary to prevent future corrosion and ensure good conductivity.

If the engine loses power after a short period of operation, check the battery charge level. Also inspect the power cables and connections, ensuring the correct cable diameter is used and that connections are clean and secure.

Yes, as a Lowrance accessory designed for marine electronic equipment, this cable is built to withstand harsh marine conditions, including moisture and temperature variations. However, proper installation and regular maintenance are essential to maximize its durability.

The kit includes a power cable and screws. The specific connector type for the battery will depend on your installation and the battery type used. The cable is designed to be integrated into your power system, often by connecting to a terminal block or directly to the battery terminals via appropriate lugs, which are not included in this kit.