PULL cable kit V2

The Lowrance Ghost bow thruster cable kit V2 is a spare parts assembly designed for the Lowrance Ghost electric bow thruster. Its primary function is to ensure the proper operation of the cable mechanism, enabling smooth deployment and retraction of the thruster on your vessel.

The PULL cable kit V2 Lowrance is complete and includes the following parts:

1x Braided stainless steel pull cable
1x Lower handle part
1x Upper handle part
1x Pull cable barrel
2x Hex socket screws (M4.0 x 0.7 x 6)

Yes, the kit includes a braided stainless steel pull cable, which provides good corrosion resistance and increased durability in the marine environment.

The Lowrance PULL cable kit V2 has dimensions of 20.3 × 30.5 × 2 cm and a lightweight of approximately 0.1 kg. These specifications make it easy to handle and store.

Yes, this kit is an original spare part from the Lowrance brand, specifically designed for its bow thrusters. It carries the supplier reference 000-15280-002.

The primary function of the pull cable is to enable manual deployment and stowage of the Lowrance Ghost electric motor. It is part of the mechanism that facilitates launching and retrieving the motor.

Yes, the PULL cable kit V2 (part number 000-15280-002) is an updated version that replaces the previous part number 000-15280-001. It ensures full compatibility with existing Lowrance Ghost engine versions.

Replace your pull cable if you notice signs of wear, damage, or if the deployment and stowage mechanism of your Lowrance Ghost motor becomes difficult or jerky. A visual inspection before each use is recommended.

The Lowrance PULL cable kit V2 includes both parts of the handle: the lower part and the upper part, as well as the cable pulling barrel. This allows for replacing the entire handle if necessary.

The Lowrance PULL cable kit V2 is specifically designed to be compatible with the Lowrance Ghost bow thruster. It is an essential spare part for this model.

No, this kit is specifically designed and adapted for the Lowrance Ghost electric motor. It is not guaranteed to be compatible with other electric motor models, even from other brands.

Yes, the PULL cable kit V2 is compatible with all shaft lengths of the Lowrance Ghost electric motor, whether the 47, 52 or 60-inch models.

The PULL cable kit V2 is designed for the Lowrance Ghost electric bow motor. Although the Ghost X is part of the Ghost series, the product description specifies the "Lowrance Ghost Trolling Motor". For Ghost X compatibility, check the Ghost X specific documentation or contact Lowrance support.

Installing the PULL cable kit V2 requires basic mechanical skills and adherence to the Lowrance Ghost engine installation manual instructions. It is recommended to consult this manual for detailed steps. If you are not comfortable with this type of operation, it is advisable to hire a professional.

The kit includes hex socket head screws (M4.0 x 0.7 x 6). Therefore, an Allen wrench of the appropriate size will be required to tighten these screws. Other tools may be needed to remove existing parts from the Ghost engine depending on the installation manual.

Visually inspect your pull cable and handle before each use. Signs of deterioration include fraying, breaks, excessive stiffness, or if the motor is difficult to deploy or stow. If any of these issues are present, replacement is required.

When installing, ensure you disconnect the power supply to the electric motor beforehand for safety reasons. Strictly follow the installation steps in your Lowrance Ghost motor manual to ensure correct assembly and avoid any damage.

If the engine remains difficult to deploy after installing the new kit, check that the cable and handle installation is correct. Also ensure that the spacing at the stabilizer bar complies with the recommendations in the Lowrance Ghost engine user manual.

Yes, the PULL cable kit V2 Lowrance includes two socket head screws (M4.0 x 0.7 x 6), essential for mounting the handle components and cable.

The Lowrance PULL cable kit V2 is designed for both corrective maintenance, in case of failure of the existing cable or handle, and preventive maintenance, by replacing worn parts before they cause an operational issue.