ECLIPSE SNL100, Neon Flex Light, Blue, 5m - Garmin image 1

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 9%

Garmin

010-04491-00

ECLIPSE SNL100, Lumishore Neon Flex blue ribbon, 5 m

The Lumishore ECLIPSE SNL100 Neon Flex Light Blue 5m (SKU: 010-04491-00) is a marine-grade linear lighting solution with waterproofing (IP68) providing seamless illumination. Flexible and UV-resistant, it is ideal for decorative and accent lighting both inside and outside sailboats on 12V systems.

Retail priceBenefit from the professional rate

159,30€

159,30€ ~~174,99€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Product subtype	Flexible LED light strip
Typical power consumption	25W
Light color	Blue
IP rating	IP68
Dimmable	Oui
LED density per meter	60.0
Adjustable beam	false
Bend Axis	Side
Color / finish	Blue
Cuttable	Yes
External diameter (mm)	23
Housing material	UV-resistant polymer
Installation type	Surface mount
Integrated switch	false
Minimum Bend Radius Mm	120
Nominal voltage	12
Operating voltage range	10-15V
Power Consumption Typical Per Meter	5
Height (mm)	12.2
Product Length M	5
Width (mm)	23
Warranty	3

Detailed description

Discover the Lumishore ECLIPSE SNL100 Neon Flex Light Blue 5-meter strip (SKU: 010-04491-00), the ultimate linear lighting solution for your boat. Designed to provide seamless, point-free illumination, this flexible neon strip is fully waterproof (IP68) and UV-resistant, making it ideal for indoor and outdoor installations. Its flexible design allows it to conform to curved surfaces, perfect for under-gunnel strips, cabin ceilings, and T-tops. Operating on 12V DC systems (10-15V), it consumes approximately 5 watts per meter. The SNL100 is easy to install with simple 2-wire wiring and can be controlled via an on/off switch or an ECLIPSE control center. It features a density of 60 blue LEDs per meter and a 3-year warranty. The minimum bending radius is 120mm on the vertical axis. It can be cut to the desired length and sealed before installation.

Documentation

Type	Nom
	Notice d'installation - Guide d'installation des bandeaux lumineux flexibles ECLIPSE SNL100

Expert opinion

« Marine Flexible Lighting and High Performance: Expert Review of the Lumishore ECLIPSE SNL100 »

As a marine equipment expert, I strongly recommend the Lumishore ECLIPSE SNL100 Neon Flex Light. Its robust and watertight design (IP68) ensures exceptional durability in the marine environment. The flexibility of the neon allows for aesthetic integration into complex spaces, providing accent lighting without noticeable light points. Easy installation and 12V compatibility make it a practical choice for most vessels. It's an excellent option for those seeking a reliable, high-performance, and elegant lighting solution.

Payment and security

Your payment information and data are processed securely.

ECLIPSE SNL100, Lumishore Neon Flex blue ribbon, 5 m

159,30€

159,30€ ~~174,99€~~

Frequently Asked Questions

Need help? Contact us

What is the Lumishore ECLIPSE SNL100 Neon Flex Light?

The Lumishore ECLIPSE SNL100 is a flexible linear lighting solution designed for boats. It provides uniform, seamless illumination, ideal for decorative indoor and outdoor installations.

What is the color of the lighting for this flexible neon strip?

This specific model of the ECLIPSE SNL100 flexible neon emits a blue light.

What is the length of the Lumishore ECLIPSE SNL100?

The Lumishore ECLIPSE SNL100 is supplied in a 5-metre length.

What is the power consumption of this flexible LED strip?

The ECLIPSE SNL100 flexible LED strip consumes approximately 5 Watts per meter for each lighting channel.

Is the Lumishore ECLIPSE SNL100 flexible neon waterproof?

Yes, the Lumishore ECLIPSE SNL100 is fully waterproof with IP68 certification. It can be installed in wet areas, both indoors and outdoors. However, it is not designed for permanent submersion in water.

Is this product UV-resistant?

Yes, the ECLIPSE SNL100 flexible neon is made from a UV-resistant material. However, it is recommended not to install it in areas exposed to strong direct sunlight.

Can the flexible neon be cut to a specific length?

Yes, the flexible neon can be cut to the desired length. It is important to cut only at the marked cutting points and to use the provided sealing kit to reseal the cut ends before installation.

Where can the ECLIPSE SNL100 flexible neon be installed on a boat?

This flexible LED strip is versatile and can be installed indoors or outdoors, including in wet areas. It is ideal for under-gunnel strips, cabin ceilings, and T-tops thanks to its flexibility.

What general precautions should be taken before installing the flexible LED strip?

Before any installation, it is essential to ensure that the vessel's power source and battery are disconnected or isolated. Electrical and mechanical installation must be performed by a qualified professional.

How to handle flexible neon during installation to avoid damaging it?

To avoid damaging the flexible neon strip:

Always unroll it carefully along its full length; do not handle it by a single end. Do not drop it or allow it to twist. Do not apply excessive pressure. Do not pull, stretch, twist, or bend it along the vertical axis. For lengths over 1 meter, it is recommended to use two people for installation.

What is the minimum bending radius allowed for this flexible LED strip?

The minimum bending radius for the ECLIPSE SNL100 flexible neon is 120 mm (4.724 in) on the vertical axis. It must not be bent on the horizontal axis or twisted.

How to ensure the cut ends of flexible LED strip are properly sealed?

After cutting the flexible LED strip at the marked points with scissors, use the provided sealing kit. It is recommended to wrap the flexible LED strip during this process to retract the printed circuit board (PCB), which will prevent the sealant from covering the LEDs and avoid discoloration.

With which type of electrical system is the Lumishore ECLIPSE SNL100 flexible neon compatible?

The flexible neon is designed to operate only with 12V DC boat electrical systems. It can function within a voltage range of 10V to 15V DC.

Can I connect the flexible LED strip to an AC power source?

No, the ECLIPSE SNL100 flexible neon must never be connected to an AC voltage or to any voltage outside the 10–15 V DC range.

How to control the blue flexible neon lighting?

The flexible blue neon lighting can be controlled in two ways:

Via a simple on/off switch.Via an ECLIPSE control hub for more advanced management.

Is it possible to use this flexible LED strip with other types of lighting (bicolor, RGB) in the same area of an ECLIPSE control center?

No, it is important not to add monochrome lights (such as this blue neon), bicolor and RGB to the same zone output of an ECLIPSE control panel. Each type of light must use a separate zone output.