NMEA 2000/USB Bridge

The Maretron USB100-01 bridge is an interface that connects an NMEA 2000 network to a computer via a USB port. It is designed to facilitate bidirectional communication of marine data between your boat's electronic systems and software applications installed on a PC.

The USB100-01 bridge is used for several essential purposes. It enables monitoring of vessel data, configuration of devices connected to the NMEA 2000 network, and diagnostics of onboard systems using software applications on a computer. It is a key tool for integrating marine systems with IT solutions.

PC connectivity: Enables easy integration with the NMEA 2000 network.Bidirectional communication: Data can be sent and received, facilitating monitoring and control.NMEA 2000 certification: Ensures high reliability, security, and compatibility.Robustness: Tested to IEC 60945 standards, suitable for demanding marine environments.Diagnostics and configuration: Provides access to software tools for onboard system diagnostics and configuration.

Yes, the Maretron USB100-01 bridge is NMEA 2000 certified. This certification confirms compliance with strict safety criteria and correct implementation of NMEA 2000 network messaging and management.

The NMEA 2000 certification means the product has passed over 100 rigorous tests. These tests cover critical aspects such as:

Priority messaging, ensuring the most important messages are always transmitted.Automatic addressing, allowing products to be connected and disconnected without disrupting the network.Product information recognition on the network.Immunity to electromagnetic interference (EMI) and noise.Electrical isolation to prevent any network disruption.This certification guarantees a high level of reliability, interconnection, and security.

Yes, the Maretron USB100-01 bridge is tested to IEC 60945. This international standard is specifically designed for maritime navigation and radiocommunication equipment and systems, ensuring its suitability and robustness for operation in demanding marine environments.

Yes, data transfer via the Maretron USB100-01 gateway is bidirectional. This means the computer can not only receive data from the NMEA 2000 network (for monitoring), but also send commands or information to the network (for configuration or control), enabling full interaction.

The USB100-01 bridge can transfer all data compliant with the NMEA 2000 protocol. This includes a wide range of marine data such as GPS data, wind, depth, speed, temperature, tank level, engine data, and many others, depending on the sensors and devices connected to your NMEA 2000 network.

This NMEA 2000/USB bridge, with the reference USB100-01, is a product from Maretron. Maretron specializes in ship monitoring and control systems based on the NMEA 2000 protocol.

Yes, the Maretron USB100-01 bridge is specifically designed for monitoring and controlling vessels. By connecting the NMEA 2000 network to a computer, it enables the use of dedicated software to view the boat's system status, configure devices, and perform advanced diagnostics.

The Maretron USB100-01 bridge is compatible with all marine networks compliant with the NMEA 2000® standard. It connects directly to a standard NMEA 2000 port on your vessel.

The USB100-01 gateway can be used with a variety of PC software that supports NMEA 2000 data input via a virtual serial port. This includes navigation software (such as OpenCPN, MaxSea), NMEA 2000 diagnostic tools, and boat monitoring applications. Maretron also provides its own software tools like N2KAnalyzer® or N2KExtractor®.

The Maretron USB100-01 bridge is generally compatible with Windows, macOS, and Linux operating systems. It uses USB CDC (Communication Device Class) drivers, which are often built into modern operating systems, allowing automatic recognition as a virtual serial port. Specific drivers may be available on Maretron's website for certain Windows versions if needed.

The USB100-01 gateway does not connect directly to multiple individual NMEA 2000 devices. Instead, it connects to the entire NMEA 2000 backbone network of your boat. Once connected to the network, it has access to all data from every NMEA 2000 device connected to that same network.

Yes, the Maretron USB100-01 gateway is designed to be compatible with all certified NMEA 2000 products and sensors from other brands. The NMEA 2000 protocol ensures standardized interoperability between equipment from different manufacturers, provided they meet the certification requirements.

The Maretron USB100-01 gateway connects to the NMEA 2000 network via a standard NMEA 2000 connector (typically Micro-C type). It plugs into the NMEA 2000 backbone on your boat just like any other device.

The Maretron USB100-01 bridge is typically powered directly by the NMEA 2000 network to which it is connected. The NMEA 2000 network provides the necessary power to devices connected to it.

For the installation of the USB100-01, you must have a functional NMEA 2000 network on your boat with an available connection port. Additionally, a computer with a free USB port and compatible software to interpret NMEA 2000 data is required to fully use the bridge.

In most cases, modern operating systems (Windows 10/11, macOS, Linux) automatically recognize the Maretron USB100-01 gateway as a virtual serial port thanks to the built-in USB CDC class drivers. However, if automatic recognition does not occur or if you are using an older version of Windows, specific drivers can be downloaded from the Maretron website.