Gen2 - Euro 230 Vac Power Supply

The Maretron OctoPlex G2-Series Network Power Supply (A3205-2) is a key component of the OctoPlex G2-Series power distribution system. It is designed to provide regulated power to the dual NMEA 2000 networks, ensuring the reliability and safety of the redundant electrical architecture aboard your vessel.

Its primary role is to provide a stable and regulated power supply for the NMEA 2000 network and the entire OctoPlex G2-Series system. This power supply is essential for proper operation and redundancy of the system, eliminating single points of failure for AC and DC load control onboard.

This power supply is specifically designed for European applications and is compatible with 230 Vac (Volts alternating current) electrical networks.

The OctoPlex G2-Series system offers several advantages, including:

A redundant architecture that eliminates single points of failure, increasing safety and reliability.A significant reduction in wiring, which decreases weight and simplifies installation.Full control of the vessel's AC and DC loads via an NMEA 2000 network.Monitoring and control of NMEA 2000 marine devices such as compasses, GPS, or tank level sensors.

Yes, the Maretron OctoPlex G2-Series Network Power Supply module complies with several international maritime standards. It is certified CE, IEC60533 (electrical and electronic installations in ships) and IEC60945 (maritime navigation and radiocommunication equipment and systems).

This product holds the following certifications:

CE ApprovedIEC60533 (Electrical and electronic installations in ships)IEC60945 (Marine navigation and radio-communication equipment and systems)NMEA 2000® Approved (Certified, Category B)Lloyd’s Type Approved (Test Specification #1, ENV2 Certificate No. 10/00021)

By providing regulated power to the dual NMEA 2000 backbone and acting as a key component in the OctoPlex system’s redundant architecture, this power supply eliminates single points of failure. This design ensures a stable and secure electrical foundation, essential for monitoring and controlling AC and DC loads onboard, thereby increasing the overall reliability of the vessel’s electrical system.

Yes, the OctoPlex G2-Series system, of which this power supply is a key component, allows complete control of the vessel’s AC (alternating current) and DC (direct current) loads. This control is achieved via the NMEA 2000 network.

The OctoPlex G2-Series system enables monitoring and control of various NMEA 2000-compatible marine devices, such as compasses, GPS receivers, tank level sensors, and other AC and DC loads on the vessel.

Yes, this power supply is specifically designed for European applications and is compatible with 230 Vac mains.

Installation of this type of advanced marine electrical equipment should be carried out by qualified technicians or installers with a good understanding of NMEA 2000 systems and marine electrical installations, to ensure compliance with standards and safety.

The A3205-2 power supply is designed to integrate directly into the NMEA 2000 network, providing the regulated power required for the dual CAN bus NMEA 2000 operation. It is a critical link to ensure all OctoPlex system components and NMEA 2000 devices can communicate and function properly.

Yes, one of the key advantages of the OctoPlex G2-Series system is that it uses an NMEA 2000 network (CAN bus), which significantly reduces traditional wiring and simplifies the overall electrical system installation aboard the vessel.

Yes, it is important to note that OctoPlex products are not ignition-protected devices and must not be installed in areas with combustible vapors. It is also recommended to periodically check all mounting hardware and connections after installation to ensure continuous and safe performance.

Yes, a periodic inspection of all mounting hardware and connections is recommended to ensure the system’s proper operation and long-term safety.

As a key component, this power supply is compatible with all modules in the Maretron OctoPlex G2-Series system, including AC and DC power distribution units, battery monitors, AC power monitors, system interface units (SIU), and dedicated multifunction displays.

Yes, being NMEA 2000 certified (Category B), this power supply provides the electrical backbone for a standard NMEA 2000 network. Therefore, it is compatible with other NMEA 2000-certified marine equipment regardless of brand, provided they comply with the NMEA 2000 specification.

No, this power supply is specifically designed for European applications and is compatible with 230 V AC networks. It must not be used with 110 V systems.

Yes, the OctoPlex G2-Series system, which is powered by this unit, is designed to integrate with multifunction displays from various manufacturers. The MConnect web server of the OctoPlex system supports integration with MFDs such as Raymarine Axiom and Garmin OneHelm™, enabling a configurable and customizable user interface.

Yes, the OctoPlex G2-Series system as a whole, and its components such as this power supply, are NMEA 2000 certified (Category B). This certification ensures compliance with communication and interoperability standards within the marine network.