100A 125/250V PLUG MFG-#ME4100P12M

The Marinco M4100P12 male connector is designed for high-current shore power applications. It safely connects a vessel to a shore power electrical source.

This connector is rated for 100 amperes and 125/250 volts. It is single-phase with a 3-pole, 4-wire configuration.

The connector housing is made from a blend of yellow nylon and ABS. The contact carrier is nylon, and the contacts are solid nickel-plated brass. The terminal screws are also nickel-plated brass.

The Marinco M4100P12 connector has an IP 67 ingress protection rating, in accordance with IEC 60529. This means it is waterproof and provides protection against temporary immersion.

This connector uses pillar-type terminals with double nickel-plated brass screws. This design ensures a secure and reliable connection of the cables.

The Marinco M4100P12 marine connector is certified by Underwriters Laboratories, Inc. (cULus) for the United States and Canada (file E106703). It also meets ABYC and US Coast Guard standards.

Yes, this connector is specifically designed for the marine environment. Its robust construction and IP67 waterproofing make it suitable for shore power applications on large vessels.

The Marinco M4100P12 connector has a 3-pole, 4-wire configuration, suitable for single-phase power systems.

The housing of this connector is yellow, made from a blend of nylon and ABS.

Yes, this connector is specifically designed for high-current shore power applications, with a 100-amp capacity, making it ideal for large vessels.

The double nickel-plated brass screws on pillar-type terminals securely fasten the cable. They ensure a stable and reliable electrical connection, minimizing the risk of loosening due to vibrations or movement.

Yes, the connector's overall design includes an integrated cable gland to hold the cable in place and reinforce waterproofing at the cable entry point.

This male connector is specifically designed to mate with the Marinco M4100R12 socket.

This connector can accommodate cables ranging from 1/0 AWG to 3 AWG.

The connector is compatible with cables having an outer diameter (OD) between 0.98 inch (2.49 cm) and 1.97 inch (5.00 cm).

Yes, the earth pin of this connector complies with IEC 60309-2 standard, with the earth pin configured at 12 o'clock.

Yes, this connector is specifically designed for single-phase power systems, with a 3-pole, 4-wire configuration.

The terminals are pillar-type and feature double nickel-plated brass screws. It is recommended to tighten both screws firmly for each terminal to ensure an optimal and secure electrical connection for 1/0 – 3 AWG cables.

The connector is designed with an integrated cable gland and a supported cable diameter range of 0.98" to 1.97" to ensure IP 67 sealing around the cable, thus protecting internal connections from moisture and water.

According to IEC 60309-2 standard, the earth pin of this connector is positioned at 12 o'clock.