AC Master 12/1500 inverter (230 V 50/60 Hz, AU/NZ plug)

The Mastervolt AC Master 12/1500 inverter delivers a continuous output of 1500 W, whether at 25 °C or 40 °C (with a power factor of 1).

This inverter has compact dimensions of 248 x 421 x 83 mm (height x length x depth) and a weight of 4.2 kg, making installation straightforward.

The Mastervolt AC Master 12/1500 inverter is designed to operate with a 12 V input voltage from your battery.

The Mastervolt AC Master 12/1500 inverter provides an output voltage of 230 V AC at a frequency of 50/60 Hz. It generates a stable pure sine wave alternating current.

Yes, this inverter includes an automatic energy-saving system. This mode can be enabled or disabled via a DIP switch (DIP switch 4) and extends battery life by reducing consumption when no load is present.

The Mastervolt AC Master 12/1500 inverter has excellent efficiency, reaching up to 93%.

The Mastervolt AC Master 12/1500 inverter is equipped with multiple safety features to protect your equipment and the system. These include protection against:

OverheatingOverloadShort circuitsAbnormal battery voltages (too low or too high)

The Mastervolt AC Master 12/1500 inverter can operate within an ambient temperature range of -25 °C to 60 °C. However, a power reduction is to be expected above 40 °C.

Yes, the Mastervolt AC Master 12/1500 inverter can handle peak loads. It can support up to 1730 W for 1 minute and up to 2650 W for 1 second, which is useful for devices with high inrush current.

For a secure installation, the Mastervolt AC Master inverter's chassis ground terminal must be connected to the central ground point of the vehicle or boat.

For the AC Master 12/1500 inverter (12 V model), the minimum recommended DC cable cross-section is 50 mm² (1/0 AWG) to ensure optimal performance and avoid voltage drops.

For the AC Master 12/1500 inverter (12 V and 24 V models), the minimum recommended AC cable cross-section is 1.00 mm² (17 AWG).

Yes, the Mastervolt AC Master 12/1500 inverter has a remote control terminal. It allows connection of a remote control panel or a remote switch for added convenience.

If the red LED flashes slowly, this indicates an input DC voltage that is too low. Check the following:

Is the DC input voltage too low due to voltage drop from excessively long or undersized DC cables? Shorten the DC cables or use thicker-gauge wires.Are the connections loose or corroded? Tighten the connections; burnt cables must be repaired immediately.Is the battery dead? Disconnect the load and recharge the battery.

The Mastervolt AC Master 12/1500 inverter is equipped with an AU/NZ Outlet power socket, compliant with Australian and New Zealand standards.

Yes, the Mastervolt AC Master 12/1500 inverter is designed for recreational and semi-professional applications, which typically include marine and onboard uses where a reliable AC power supply is required from a 12 V battery source.

No, Mastervolt disclaims all liability for indirect or consequential damages resulting from the use of the AC Master inverter, as stated in the product documentation.

The energy-saving mode of the Mastervolt Master AC inverter can be enabled or disabled using DIP switch 4. Set the switch to « OFF » to disable the energy-saving mode and to « ON » to enable it.

For the energy-saving mode, the charge threshold settings can be adjusted. The minimum threshold is 20 VA and the maximum threshold is 110 VA.