MG LFP IP battery mounting brackets, pack of 2 – MG3000523

The MG3000523 product is a set of two mounting brackets from MG Energy Systems. They are specifically designed to secure an MG LFP IP battery within a properly sized installation.

The brackets are made of steel and coated with black powder paint.

Each bracket has a thickness of 3 mm.

The MG3000523 kit includes two mounting brackets.

The brackets are black.

The declared shipping weight for this pack of two brackets is 0.5 kg.

The primary purpose of these brackets is to secure and firmly hold an MG LFP IP battery within its installation, ensuring compliance with the manufacturer's specifications.

No, these brackets are not classified as dangerous goods for transport.

These brackets are specifically designed to be compatible with the MG LFP IP battery family, including the MGLFP243230 model.

Compatibility of these brackets with MG batteries not part of the LFP IP family is not established by this reference.

Yes, before ordering, it is recommended to verify the exact model of your battery, the type of available mount, and the mechanical stresses the installation will be subjected to.

Yes, these brackets are a dedicated mechanical accessory recommended by MG Energy Systems for mounting its LFP batteries.

In addition to the brackets, you will need to provide separately the battery itself, a suitable mount, the required mounting hardware, and the appropriate tools for installation.

Both brackets must be mounted on a solid surface using appropriate fasteners, in accordance with the detailed instructions in the current MG LFP IP battery installation manual.

It is crucial to use fasteners and a mount suited to the specific loads and vibrations of your application. Additionally, ensure that the brackets are held securely without excessive compression or damage to the battery housing.

Fasteners must be selected according to the specific loads and vibrations of the application. Fasteners are not included with the brackets and must be purchased separately.

Yes, the battery must be mounted on a solid surface. The bracket must be suitable for the loads and vibrations of the application to ensure secure mounting. The bracket is not supplied with the brackets.

For installation, you must have the appropriate tools, including a torque wrench and sockets or wrenches suited to the bracket fastenings.

After installation, visually check that the brackets are secure and that they hold the battery firmly without compressing it or damaging the casing.

Yes, part number MG3000523 is listed in the MG LFP IP battery installation manual, specifically in the LFP 24V IP 2026 manual, where it is referenced as the recommended mounting accessory.