Kit système de commutation numérique Naviop LOOP M+

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

En cours de réapproSave 5%

Navico

000-14663-001

Navico Naviop LOOP M+ Digital Switching System Kit

The Naviop LOOP M+ kit from Navico is a digital switching system designed for customized monitoring and control of marine electrical systems. It provides 16 fused relay channels and 16 fuse channels, with seamless integration into Simrad Pro systems via NMEA 2000, Naviop CAN, and Ethernet. Configuration is performed via the Naviop Loop SetApp web application.

The kit includes a Naviop processing and protocol unit as well as two Egon+ power distribution boards.

Retail priceBenefit from the professional rate

2.675,94€

2.675,94€ ~~2.809,74€~~

Shipping calculated at checkout.

Out of stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Product use	Customizable monitoring and control system for onboard electrical systems, providing a clear view of the electrical panel status down to individual fuses or relays.
Product range	Loop
Type d'architecture système	Distributed digital switching system
Compatible NMEA 2000	Oui
Wired network	Ethernet, CAN Bus (Naviop CAN, NMEA 2000), Serial (RS-232, RS-485, RS-422)
Nombre d'entrées	16.0
Nombre de sorties	16.0
Courant de sortie maximal par canal	20 A (resistive load) / 16 A (inductive load)
USB port count	1.0
Nombre de ports Ethernet	2.0
NMEA 2000 Load Equivalency Number (LEN)	0
Connector type	Binding posts, M8 studs
Plage de section de câble	#10-16 AWG
Galvanic isolation	Oui
Operating voltage range	9 to 32 V DC
Powering method	External DC power supply
Typical power consumption	3.6 W (max)
Configuration software name	Naviop Loop SetApp
Support mise à jour firmware	Oui
IP rating	IPX7
Operating temperature range	-15°C to +55°C
Can Bus Isolation Voltage	1 kV
Ce Compliance	Yes
Protocole de communication	CAN Bus, Ethernet, Serial (RS-232, RS-485, RS-422)
Ethernet Port Speed	10/100
Protection anti-déflagrante	Yes (with appropriate fuses and cover)
Number Of Egon Boards	2
Plage d'humidité de fonctionnement	5 - 85% (no condensation)
Serial Port Configurability	Configurable via software
Storage temperature range	-20°C to +70°C
Courant max port USB	0.1
USB version	2.0
Wired input	Ethernet, USB, Serial, CAN Bus, DC Power
Wired output	Controllable outputs (relays/fuses),Ethernet,Serial,CAN Bus

Detailed description

The Navico Naviop LOOP M+ Digital Switching System kit is a customizable monitoring and control solution designed for onboard electrical systems. This system integrates a processing unit and protocols, along with two Egon+ power distribution boards, enabling detailed management of the electrical panel down to individual fuses or relays.

Extended control capabilities

The LOOP M+ system offers 16 controlled fuse relay channels and 16 fuse channels for comprehensive management of critical onboard functions. It allows monitoring and control of equipment such as navigation lights, bilge pumps, and sound alarms. The system is configured via the Naviop Loop SetApp web application, providing a dedicated user interface accessible through a compatible multifunction display (MFD).

Connectivity and marine robustness

Designed for seamless integration, the LOOP M+ is compatible with existing Simrad Pro systems and supports standard marine network protocols, including Naviop CAN, NMEA 2000, and Ethernet. It features two Ethernet ports (10/100), one USB port (Host v. 2.0), two serial ports (RS-232, RS-485, RS-422, optically isolated), and two CAN bus ports (1 kV optical isolation). The system operates on 9 to 32 V DC power and its Egon+ board is spark-proof. The main unit has IPx7 protection, while the Egon+ board is rated IP66, ensuring resistance to demanding marine environments with operating temperatures ranging from -15°C to +55°C for the main unit and -40°C to +85°C for the Egon+ board.

Documentation

Type	Nom
	EN - Guide d'installation - Kit Naviop LOOP M+
	Loop_M_User_Manual_EN.pdf
	Naviop_OP_Box_DoC_RCM_EN.pdf

Expert opinion

Pol CONIN

Digital Manager

« Advanced marine electrical management: analysis of Naviop LOOP M+ »

The Naviop LOOP M+ kit is a strategic solution for centralized management of electrical systems on small and medium-sized vessels. Its modular design, built around a processing unit and two Egon+ distribution boards, provides 16 relay channels and 16 fuse channels, enabling precise visibility and control of each circuit.

Integration of this system is simplified by its native compatibility with Simrad Pro equipment and NMEA 2000, Naviop CAN, and Ethernet protocols. This positions the LOOP M+ as a key component for modernizing or outfitting a vessel, offering a dedicated user interface via multifunction displays. Embedded diagnostics are a major asset for on-site troubleshooting, reducing downtime.

It is crucial to note the spark-proof protection of the Egon+ board, a critical safety feature for marine installations. While the system is customizable, it requires rigorous installation planning to optimize wiring and configuration via the Naviop Loop SetApp web application. Its value lies in its ability to provide detailed supervision and proactive management of vital boat functions, from navigation lights to bilge pumps, ensuring increased reliability and operational safety.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Navico Naviop LOOP M+ Digital Switching System Kit

2.675,94€

2.675,94€ ~~2.809,74€~~

Frequently Asked Questions

Need help? Contact us

What is the Naviop LOOP M+ Digital Switching System kit?

The Naviop LOOP M+ Digital Switching System kit from Navico is a customizable monitoring and control solution designed for onboard electrical systems. It includes a processing unit with protocols and two Egon+ power distribution boards, enabling detailed management of the electrical panel down to the individual fuse or relay.

How many controllable and monitored channels does the LOOP M+ system provide?

The Naviop LOOP M+ system provides 16 fused relay channels and 16 monitored fuse channels.

What is the required power supply voltage range for the system?

The Naviop LOOP M+ system requires a DC power supply of 9 to 32 V.

What is the maximum current consumption of the system?

The maximum current draw of the system is 0.15 A at 24 V DC.

What are the operating and storage temperatures for the LOOP M+?

Operating temperature is -15°C to +55°C. Storage temperature is -20°C to +70°C.

What is the IP protection class of the Naviop LOOP M+ system?

The Naviop LOOP M+ system has an IPx7 protection rating for the main unit and IP66 for the Egon+ displays.

What electrical protections does the Naviop LOOP M+ system integrate?

The Naviop LOOP M+ system integrates multiple electrical protections:

Reverse polarity protection: down to -24 V DC for 5 minutes. Short-circuit protection. Ground short-circuit protection: for 5 minutes. Short-circuit protection at 16 V DC: for 5 minutes. Overload protection: at 135%.

What type of ingress protection does the system have?

The Naviop LOOP M+ system is equipped with electronic input protection.

What is the maximum allowable load for fuse channels?

Fuse blocks can handle a maximum load of 30 A at 12 V DC.

What is the maximum allowable load for relay channels and fuses?

Relay channels and fuses can handle a maximum load of 20 A (resistive load) or 16 A (inductive load, motor, pump) at 12 V DC.

What is the maximum total load the chartplotter can support?

The maximum total load that each Egon+ card can support is 200 A.

How many Egon+ charts are included in the LOOP M+ kit?

The Naviop LOOP M+ kit includes two Egon+ cards.

Which interface ports are available on the system?

The Naviop LOOP M+ system has the following interface ports:

2 Ethernet ports (10/100). 1 USB port (Host v. 2.0, max. 100 mA). 2 serial ports (RS-232, RS-485, RS-422, software-configurable, optical isolation). 2 CAN bus ports (optical isolation - 1kV).

Is the system spark-protected?

Yes, the system is protected against ignition only when fitted with ignition-protected fuses and the cover is closed.

How is the Naviop LOOP M+ system configured?

The Naviop LOOP M+ system configuration is done via the Naviop Loop SetApp web application, providing a dedicated user interface.

What is the recommended wire size for the outputs?

Recommended wire size for outputs is 1.31 mm² to 5.26 mm² (AWG #10-16).

What are the power connector specifications?

The power connectors are two M8 input studs, each rated up to 100 A.

Is the Naviop LOOP M+ system compatible with multifunction displays (MFD)?

Yes, the Naviop LOOP M+ system user interface is accessible via a compatible multifunction display (MFD).

What is the difference between the Loop M and the Loop M+ regarding Egon+ charts?

The Loop M system uses a single Egon+ board (CAN ID:1), providing 8 controllable outputs and 8 monitored power outputs. The Loop M+ system uses two Egon+ boards (CAN ID:1 and CAN ID:2), providing 16 controllable outputs and 16 monitored power outputs.