Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 1%

Navicom

RY452NG

NMEA cable new generation for Navicom fixed VHF

The Navicom RY452NG cable is designed to provide NMEA 0183 connectivity for Navicom fixed VHF radios in the RT550 and RT650 series. It enables AIS and DSC data exchange at 4800 baud with compatible handsets. Compatible with Navicom fixed VHF radios RT650, RT650 MOB, RT550, RT551, RT550 BT, RT550 AIS.

Retail priceBenefit from the professional rate

21,22€

21,22€ ~~21,50€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Detailed description

The NAVICOM RY452NG cable is an accessory dedicated to establishing NMEA0183 connectivity for Navicom fixed VHFs. It enables the connection between your VHF and other marine electronic equipment, ensuring the exchange of essential data for navigation and safety.

Compatibility and Technical Specifications

This cable is specifically designed for the following Navicom fixed VHF models: RT650, RT650 MOB, RT550, RT551, RT550 BT, and RT550 AIS. It supports the NMEA0183 protocol with a data rate of 4800 baud, a standard speed for transmitting AIS (Automatic Identification System) and DSC (Digital Selective Calling) information.

Configuration Guidelines

For successful integration, VHF configuration is required. In the "AIS Setup" menu, the "Baud rate" tab must be set to 4800 baud. When connecting to a Humminbird display, the NMEA0183 output must be enabled in the "Settings > Network > NMEA0183" menu and the baud rate set to 4800 baud. To display position on the VHF via a Humminbird display (for DSC functions), advanced user mode and NMEA output must also be enabled; the position will display once the display has acquired its own position.

Documentation

Type	Nom
	FR - Schéma de raccordement - Navicom 550 650 ais legacy
	FR - Schéma de raccordement - Navicom 550 650 ais onix
	FR - Schéma de raccordement - Navicom 550 dsc legacy
	FR - Schéma de raccordement - Navicom VHF NAVICOM AIS
	FR - Schéma de raccordement - Navicom VHF NAVICOM DSC
	FR - Schéma de raccordement - Navicom helix 550dsc
	FR - Schéma de raccordement - Navicom helix 9 10 12 650 550 ais
	FR - Schéma de raccordement - Navicom vhf navicom 550 dsc onix
	FR - Matrice de compatibilité - Navicom Pièces VHF fixes (matrice accessoires)

Expert opinion

« Câble NMEA Navicom RY452NG : Connectivité et configuration essentielles »

Le câble NAVICOM RY452NG est un élément stratégique pour l'interconnexion des VHF fixes Navicom avec d'autres équipements électroniques de bord. Sa valeur d'usage réside dans sa capacité à permettre un échange de données NMEA0183 fiable, indispensable pour des fonctions de sécurité et de navigation telles que l'affichage des informations AIS sur un traceur ou la transmission automatique des coordonnées GPS vers la VHF pour les appels DSC.

Lors de l'installation, il est crucial de suivre scrupuleusement les directives de configuration, notamment le réglage du débit de transmission sur la VHF et l'activation des sorties NMEA sur les combinés multifonctions, comme ceux de Humminbird. Le non-respect de ces étapes peut entraîner une absence de communication ou une transmission de données erronée, compromettant l'efficacité des systèmes connectés. Ce câble n'est pas un accessoire plug-and-play universel ; il requiert une attention particulière aux paramètres logiciels pour garantir une intégration fonctionnelle.

La spécificité de ce câble pour les VHF fixes Navicom désignées (séries RT650 et RT550) en fait un choix précis pour ces systèmes. Il est conçu pour les architectures NMEA0183. Il est important de ne pas tenter de l'utiliser dans des environnements NMEA2000, qui nécessitent une connectivité et des interfaces distinctes. Sa conception assure une compatibilité électrique et protocolaire optimisée avec les VHF Navicom compatibles, évitant ainsi les problèmes d'interopérabilité souvent rencontrés avec des câbles génériques.

Payment and security

Your payment information and data are processed securely.

NMEA cable new generation for Navicom fixed VHF

21,22€

21,22€ ~~21,50€~~

Frequently Asked Questions

Need help? Contact us

Which Navicom fixed VHF models is this cable compatible with?

The NAVICOM RY452NG cable is specifically designed for the following Navicom fixed VHF models:

RT650RT650 MOBRT550RT551RT550 BTRT550 AIS

What is the primary function of the NMEA RY452NG cable?

The NAVICOM RY452NG cable is an accessory dedicated to establishing NMEA0183 connectivity for Navicom fixed VHF radios. It provides the link between your VHF and other marine electronic equipment, ensuring the exchange of essential data for navigation and safety.

Which NMEA protocol and data rate does this cable support?

This cable supports the NMEA 0183 protocol with a data rate of 4800 baud (or 4800 Bd). This speed is standard for transmitting AIS (Automatic Identification System) and DSC (Digital Selective Calling) data.

How do I configure my Navicom VHF to use this NMEA cable?

For successful integration, your Navicom VHF must be configured as follows:

In the « AIS Setup » menu, the « Baud rate » tab must be set to 4800 Bds. The AIS transmission speed can be modified by holding the DSC menu button on the VHF.

What are the steps to connect this cable to a Humminbird display?

If you connect this cable to a Humminbird display, specific settings are required:

For Humminbird displays in general: Go to the configuration menu, switch to advanced user mode and enable the NMEA output. The position displays on the VHF only when the display acquires its position.

For Humminbird ONIX displays: Go to Home (main menu) > Settings > Network > NMEA0183 > NMEA output > Active. Then, in Settings > Network > NMEA0183, set the baud rate to 4800 Bd.

What type of NMEA connectivity is provided by the RY452NG cable?

The RY452NG cable provides NMEA 0183 connectivity. It is designed to exchange data between your Navicom fixed VHF and other marine equipment compatible with this protocol.