No cover - 6-position on/off switch with blue LED (3-position right switch) and 0.2 m NMEA 2000 adapter cable

The Raymarine A3801-6 switch is a 6-position digital on/off switching module designed for marine electrical systems. It enables intuitive control of onboard equipment via the NMEA 2000 network.

The switch is equipped with blue LEDs, which serve as visual indicators for the status of the circuits or controlled functions.

No, this module is specifically supplied "without a cover". It is optimized for a flush-mounted installation or for direct integration into an existing panel on your boat, allowing for a custom finish.

Its primary function is to simplify the control of direct current (DC) electrical systems aboard. By integrating with an NMEA 2000 network, it enables efficient management of the activation and deactivation of various equipment.

No, the A3801-6 is a digital switching module. It is designed to send control commands over the NMEA 2000 network. Circuit protection and breaker functionality are typically handled by separate DC load controller modules (e.g., an MPower platform CLMD12) with which this switch interacts.

Yes, this switch is designed specifically for marine applications. It is part of the MPower platform, which is known for its robustness and reliability in demanding marine environments.

Yes, by integrating with an NMEA 2000 system and compatible multifunction displays (MFD), users can monitor the status of onboard electrical and electronic systems connected through the digital switching platform.

Yes, when used in conjunction with a compatible charge controller within a digital NMEA 2000 switching system, this module contributes to the ability to reset circuits remotely.

The right-hand 3-position switch is a specific feature of this 6-position switching module. It provides additional control options for specific functions requiring three distinct states (e.g., on/off/auto or up/down/neutral).

The A3801-6 switch is fully compatible with NMEA 2000 networks. It is designed to connect directly to your boat's NMEA 2000 backbone.

An NMEA 2000 adapter cable with a length of 0.2 meters is included with the module, allowing direct and easy connection to the NMEA 2000 network.

Yes, this switch integrates easily with compatible multifunction displays that support standard digital switching PGNs (Parameter Group Numbers). Examples include Raymarine LightHouse 4 displays and other third-party MFDs.

Yes, thanks to its NMEA 2000 connectivity and the use of standard PGNs, this module ensures extended compatibility with a wide range of third-party sensors and instruments connected to the same NMEA 2000 network.

Yes, this module is designed to integrate with Maretron’s MPower digital switching platform (part of Carling Technologies). This platform uses the NMEA 2000 network to simplify electrical system control.

No, the MPower platform uses standard NMEA 2000 PGNs (Parameter Group Numbers). This ensures easy integration and interoperability with an existing NMEA 2000 system or compatible MFD, without relying on proprietary messages.

This module is designed for flush mounting. As it is supplied without a cover, it is ideal for direct integration into an existing panel on your boat, providing a clean and integrated finish.

The module connects directly to the boat's NMEA 2000 network via the supplied 0.2 m adapter cable. Electrical load control is then managed digitally over this network, in coordination with other MPower system modules.

Installation generally requires standard tools for mounting marine panels. This includes tools for cutting the recess opening (e.g., hole saw or jigsaw) and screwdrivers for securing the module.

No, connectivity is simplified thanks to the NMEA 2000 interface. The module connects directly to the NMEA 2000 backbone with a single cable, significantly reducing wiring complexity compared to traditional electrical switching systems.