Mast mount for Raymarine M132/M232 thermal camera

This mast mount, part number A80571, is specifically designed for installing Raymarine M132 and M232 thermal cameras. It ensures mechanical compatibility and seamless integration with these M100/M200 series models.

No, the Raymarine A80571 mast mount is a dedicated accessory designed specifically for Raymarine M132 and M232 thermal cameras. Use with other models or brands is not guaranteed and could compromise installation stability and safety.

Installing the thermal camera on a mast positions it high up, providing an optimized and unobstructed field of view. This maximizes thermal detection at sea, minimizes visual obstructions from the boat's superstructure, and ensures a stable platform for imaging—essential for nighttime monitoring and navigation.

The camera is secured to the mount using studs that insert into the camera base. The M100/M200 camera installation manual details the precise steps for secure mounting, whether it's a standard (ball-up) or inverted (ball-down) installation.

Yes, this mount is designed to allow different camera orientations. It supports mounting the camera in the "ball-up" (upright) or "ball-down" (inverted) position, which is useful for adjusting the field of view based on the specific mast location and surveillance needs.

The M100/M200 camera installation manual, which includes mounting information, usually lists the tools required for correct installation. Although the specific tools for the A80571 bracket are not listed separately, a typical marine hardware installation requires basic tools such as wrenches, screwdrivers, and potentially a drill for mast mounting.

Yes, the Raymarine A80571 mast mount is a Raymarine original accessory. Using a dedicated Raymarine mount ensures perfect compatibility and optimal integration with the M132 and M232 thermal cameras.

The mount is designed to simplify cable routing for the camera. The M100/M200 camera installation instructions describe how to route cables through the side wall of the mount for a clean and protected installation, minimizing exposure to marine elements.

Yes, as an accessory dedicated to the marine environment and designed by Raymarine, this mount is built to withstand harsh maritime conditions. It is designed to provide a stable and durable platform for thermal cameras at sea.

No, the Raymarine A80571 mast mount is sold separately. It is an accessory designed for installing the M132 and M232 thermal cameras, which must be purchased independently.

The camera mounting base on the bracket uses three M6 fixing points, equally spaced on a 137 mm pitch circle diameter (PCD). These specifications match the mounting requirements for M132 and M232 cameras.

Yes, to optimize camera performance, it is recommended to position the mount to minimize visual obstructions and maximize the field of view. The M100/M200 camera installation manual provides general guidelines on location requirements and safety distances, including those relative to compasses.

Yes, the mount is designed to allow inverted camera mounting, also known as "ball-down". This option can be useful for certain installation configurations to achieve the best possible viewing angle.

The available information does not specify whether the mast mounting hardware is included with the A80571 mount. It is common for boat-specific mounting accessories (screws, bolts, etc.) to be purchased separately or provided with the mast itself, but the studs for attaching the camera to the mount are included with the camera.

The part number (SKU) for this mast bracket is A80571.

The mount is designed to be attached to a mast, and its design ensures stable mounting. While not limited to a specific mast type, it is intended for installation on sailboat masts or similar structures providing the necessary height to optimize the camera's field of view.

Like any marine equipment, the mount should be inspected regularly to check the condition of the fastenings and the absence of corrosion. Periodic cleaning with fresh water can help maintain its integrity in the marine environment.

The bracket is designed to route cables through its side wall. Whether cables can pass inside the mast depends on the internal design of your mast, available openings, and the installer's skills.

Yes, the A80571 mount is compatible with Raymarine thermal cameras in the M100 series, including the M132 model. The installation manual refers to the M100/M200 series, confirming this compatibility.

Installing any equipment at height on a mast, especially if it involves cable routing and drilling, requires technical expertise and safety precautions. We recommend using a professional installer if you are not familiar with this type of work.