AC 100 A Current Transducer with Cable - To be used with the ACM100

The Raymarine AC 100 A alternating current transducer is a sensor designed for accurate measurement of alternating current intensity. It is specifically intended for use with the Maretron ACM100 alternating current monitor.

This transducer can measure AC current up to 100 amperes.

This transducer is specifically designed for use with the Maretron ACM100 AC monitor.

The Raymarine CA 100 A transducer transmits its data to the Maretron ACM100 display. The ACM100 then integrates this information into the vessel's NMEA 2000 network, enabling centralized monitoring.

Combined with the Maretron ACM100, this transducer enables detailed monitoring of alternating current sources on board, such as shore power, generators, or inverters.

Yes, the Maretron ACM100 monitor is part of a Maretron-certified NMEA 2000 system. All Maretron products are NMEA 2000® certified and have been tested to meet critical safety criteria and to correctly implement network management and messaging.

The Maretron system, including the ACM100 monitor, is tested to IEC 60945 standards for marine navigation and radio communication equipment. This certification ensures compliance with safety criteria, network management, and correct transmission of messages on the NMEA 2000 bus.

Integrating alternating current data via NMEA 2000 enables centralized monitoring and control of all onboard systems. This provides a clearer understanding of the vessel's electrical state, simplifies tracking of power consumption, and aids in managing onboard energy through a common, streamlined interface.

Yes, the product name explicitly states that it is supplied "with cable".

The Raymarine CA 100 A transducer is specifically designed for use with the Maretron ACM100 AC monitor. Compatibility with other monitors or brands is not guaranteed and not recommended to ensure proper operation and NMEA 2000 system integration.

Yes, in a Maretron NMEA 2000 system, it is generally possible to integrate monitoring of multiple AC power sources. Each source would require a Raymarine CA 100 A transducer connected to a dedicated Maretron ACM100 monitor or an ACM100 monitor supporting multiple inputs, if such a configuration is provided by the manufacturer. It is advisable to consult the Maretron ACM100 technical documentation for configuration details.

By providing accurate AC measurements, the transducer enables real-time monitoring of electrical consumption via the ACM100 display and the NMEA 2000 network. This data is essential for optimizing energy resource use, preventing overloads, and planning maintenance of electrical systems.

The product is designated as a Raymarine CA 100 A transducer. However, it is designed for use specifically with the Maretron ACM100 AC monitor, which is a component of a Maretron NMEA 2000 certified system.

A system based on NMEA 2000 provides a common and simplified interface for all onboard systems. It ensures reliable interconnection, future compatibility, and product safety, as only NMEA 2000-certified products are guaranteed to operate in harmony and safely, having passed over 100 tests.

No, this transducer is specifically a "CA 100 A Transducer", meaning it is designed to measure alternating current. For direct current monitoring, a DC monitor such as the Maretron DCM100 would be required, along with an appropriate transducer.

The Maretron catalog references software tools such as N2KBuilder®, N2KAnalyzer®, and N2KExtractor®, used for designing, analyzing, and extracting data from NMEA 2000 networks, potentially including data from the ACM100 and the transducer.

The text does not specify an external power supply for the transducer itself. Typically, transducers of this type are powered via the display they are connected to (here, the Maretron ACM100) or via the NMEA 2000 network to which the display is connected.

The Maretron ACM100 display is listed in the Maretron catalog under the "Electrical Monitoring and Control" section. Detailed information can be found in Maretron’s specific documentation for the ACM100.

Maretron systems, including components such as the ACM100 monitor and associated transducers, are world-class monitoring and control solutions designed for vessels of all sizes, making them suitable for both recreational boating and more demanding applications.

By providing accurate alternating current measurements, the transducer, via the ACM100, enables detection of abnormal consumption or potential overloads. This is crucial for preventing electrical issues, equipment failures, and ensuring the overall safety of the onboard electrical system.