Transducteur CA 400 A avec câble pour l'ACM100

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 15%

Raymarine

M000612

AC 400 A Current Transducer with Cable for ACM100

Designed for the ACM100 AC monitor, the Raymarine AC 400 A transducer enables precise measurement of alternating currents up to 400 amperes. This accessory is supplied with its cable, ensuring direct and reliable integration for effective electrical monitoring on board.

Retail priceBenefit from the professional rate

337,61€

337,61€ ~~395,00€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Product use	Alternating current measurement for ACM100 monitor
Measurement type	Current
Measurement subtype	Alternating current
Display type	Without integrated display
Measurement range	0 to 400 A
Maximum measurement range	400
Measurement unit	A
Mounting type	Around the conductor to measure
Communication protocol	Connection to ACM100 module

Detailed description

The Raymarine AC 400 A current transducer with cable is an accessory designed for the ACM100 AC monitor. It measures alternating currents up to 400 amperes, providing precise monitoring of the vessel's electrical systems. Integrated into the monitoring system, it supplies essential data for onboard energy management.

Integration and Functionality

This transducer is specifically designed to interface with an ACM100 AC monitor. The cable connection ensures reliable transmission of AC current data to the monitor, allowing users to view and analyze the vessel's electrical consumption.

Accurate Electrical Monitoring

With a measurement capacity of up to 400 A, this AC transducer is suitable for monitoring high-current circuits. It supports proactive power management, helping to prevent overloads and optimize onboard energy resource usage.

Documentation

Type	Nom
	EN - Brochure technique - Transducteur CA 400 A avec câble pour l'ACM100
	EN - Brochure technique - Transducteur CA 400 A avec câble pour l'ACM100

Expert opinion

« Expert analysis: CA 400 A transducer for ACM100 monitoring »

The Raymarine CA 400 transducer is a functional component dedicated to monitoring alternating current circuits aboard. Its value lies in its ability to provide precise consumption data to the ACM100 monitor, a key element for informed energy management on equipped vessels. It is intended for owners concerned with controlling high loads, such as air conditioners, water heaters, or powerful battery chargers, which can reach high current levels.

Installing this transducer typically involves positioning it around the main conductor of the circuit to be monitored, followed by a direct connection to the ACM100 unit via the provided cable. This approach allows for installation without major interruption of the existing circuit. It is designed to integrate with the ACM100 monitor, thereby facilitating electrical monitoring. It is important to ensure that the circuit to be monitored does not exceed the transducer’s nominal capacity of 400 A to guarantee measurement reliability and system safety.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

AC 400 A Current Transducer with Cable for ACM100

337,61€

337,61€ ~~395,00€~~

Frequently Asked Questions

Need help? Contact us

Can multiple CA 400 A transducers be used on the same ACM100 display?

The product described here is a single transducer. The ACM100 monitor's ability to handle multiple transducers depends on the ACM100 monitor's own specifications. You should consult the ACM100 monitor documentation to confirm this capability.

Which equipment is this transducer compatible with?

This transducer is specifically designed to be compatible and interface with the ACM100 AC monitor. It cannot operate standalone or with other unspecified current monitors.

Is the ACM100 display included when purchasing this transducer?

No, the ACM100 AC monitor is not included with this transducer. The CA 400 A AC transducer is a separate accessory, intended to complement an existing system or to be purchased in addition to the ACM100.

Can this transducer be used to measure direct current (DC)?

No, this transducer is an 'AC transducer', meaning it is specifically designed to measure alternating current (AC) only. It is not suitable for measuring direct current (DC).

Is this transducer compatible with NMEA 2000 systems?

The transducer itself is a sensor that provides data to the ACM100 display. NMEA 2000 compatibility will depend on the ACM100 display to which it is connected. If the ACM100 is NMEA 2000-certified, the transducer data can be integrated into the NMEA 2000 network via the display.

Are there different versions of the ACM100 with which this transducer is compatible?

The transducer is designed to operate with the ACM100 AC monitor. Without additional information on specific versions of the ACM100, it is assumed to be compatible with the standard model of the ACM100.

How does the CA 400 A transducer connect to the boat's electrical circuit?

The CA 400 A transducer is typically installed around the conductor (cable) of the AC circuit you wish to monitor. It operates on the principle of a current transformer, measuring the magnetic field generated by the current without direct contact with the electrical supply.

Does the transducer require a separate power supply?

The transducer itself is a passive device that draws its power from the measured circuit (for the sensor) and/or is powered via its connection to the ACM100 monitor. It does not require a separate direct power supply.

Is it recommended to have this transducer installed by a professional?

For any installation involving a vessel's electrical systems, and given the importance of accurate current measurement for safety and efficiency, it is generally recommended to have a qualified marine electronics professional install the ACM100 transducer and monitor.

Are there any specific considerations regarding the installation location of the transducer?

The transducer must be installed where the AC circuit cable to be monitored is accessible. Ensure there is enough space to position it correctly around the conductor and that the connection cable to the ACM100 monitor can be routed securely.

Is calibration required after installing the transducer?

The product documentation does not specifically mention a manual calibration procedure for the CA 400 A current transducer. Generally, current transducers are designed to be accurate upon installation, but any calibration or verification would be handled by the ACM100 monitor or according to its instructions.