AC Circuit Breaker Gen 2 - 3-Pole 415 VAC, 20 A, Standard Trip

This circuit breaker is designed for use in alternating current (AC) with a voltage of 415 VAC and a rated current of 20 A.

This is a three-pole circuit breaker, meaning it protects three phases of a circuit.

The primary function of this circuit breaker is to protect AC circuits aboard vessels. It is specifically designed to integrate with the Maretron OctoPlex G2-Series digital electrical distribution system.

This circuit breaker has an average tripping delay, indicating its response time to overloads or short circuits.

This circuit breaker is specifically designed for alternating current (AC) circuits.

By integrating with the OctoPlex system, this circuit breaker not only protects circuits but also enables remote activation/deactivation and monitoring of AC load status. It contributes to a redundant architecture and reduces wiring complexity.

Yes, the AC and DC circuit breakers in the OctoPlex system are designed to be field-replaceable.

This circuit breaker is designed for seamless integration with the Maretron OctoPlex G2-Series digital power distribution system.

The OctoPlex G2-Series system uses a CAN bus NMEA 2000® network for communication, enabling a redundant and reliable architecture.

The Maretron OctoPlex G2-Series system, of which this circuit breaker is part, is compatible with European applications 110V, 220V, three-phase, and 240V.

Yes, when integrated into the Maretron OctoPlex G2-Series system, this circuit breaker enables remote activation/deactivation and monitoring of the AC circuits it protects.

The OctoPlex system enables monitoring and control of AC and DC loads via a dedicated multifunction display (MFD), available in 8 or 12.1 inch sizes.

Yes, the Maretron OctoPlex G2-Series system is designed to support single-pole, double-pole, or triple-pole circuit breakers.

Yes, the Maretron OctoPlex G2-Series system is NMEA 2000® certified, ensuring high interoperability and reliability.

AC power distribution units (AC Power Distribution Units) are components of the Maretron OctoPlex G2-Series system that integrate circuit breakers like this one to provide circuit protection, remote on/off control, and AC circuit status monitoring.

The OctoPlex system uses a redundant architecture based on a CAN bus NMEA 2000® network, eliminating single points of failure and ensuring increased reliability and safety.

The OctoPlex system significantly reduces wiring complexity and cuts onboard wiring weight by using a CAN bus NMEA 2000® network.

The Maretron OctoPlex G2-Series system is CE certified, NMEA 2000® (Category B), and holds Lloyd’s Type Approved approval (Certificate No. 10/00021).

The Maretron OctoPlex G2-Series system complies with IEC60533 standards for electrical and electronic installations on ships, and IEC60945 for navigation and maritime radio communication equipment and systems.

The OctoPlex system enables monitoring and control of alternating current (AC) and direct current (DC) loads aboard the vessel.