NMEA 2000 Cables and Connectors - Bulk Micro Cable - 750 m on Spool (Gray)

This NMEA 2000 micro cable is supplied in a total length of 750 meters.

The NMEA 2000 micro bulk cable is grey in color.

This is a bulk NMEA 2000 micro cable, designed for installations requiring custom lengths.

Yes, the 750-meter cable is delivered on a reel to make storage and deployment during installation easier.

The "bulk" format means the cable is supplied without pre-assembled connectors. This allows installers to cut the cable to the exact lengths required for each segment of the network, reducing waste and optimizing on-board wiring.

Yes, this cable is compliant with the NMEA 2000 standard. Using approved NMEA 2000 cables and connectors is essential to ensure network reliability and safety.

Compliance with the NMEA 2000 standard ensures reliable data transmission, efficient network management, integrated messaging, and electrical isolation. This standard is recognized for its safety and interconnection criteria.

Yes, this cable is designed for marine network installations. It meets the requirements and conditions specific to onboard shipboard environments.

For a custom installation, bulk cable must be cut to the desired lengths. Then, appropriate NMEA 2000 micro connectors must be added to each end of the cable segment to connect it to the network.

This cable is an NMEA 2000 micro cable, so it requires NMEA 2000 micro connectors. It is recommended to use connectors approved by the NMEA 2000 standard.

Although not strictly mandatory, the use of NMEA 2000 approved cables and connectors is essential to ensure the reliability, interconnection, future compatibility, and safety of onboard systems on your vessel.

Yes, the "bulk" format of this cable is specifically designed to allow installers to cut it to the exact lengths required for each segment of the NMEA 2000 network, in compliance with the maximum length specifications for NMEA 2000 drop cables and backbone segments.

When wiring a NMEA 2000 network, it is important to respect the network architecture (backbone and drop cables), use proper terminations at the backbone ends, and ensure drop cable lengths do not exceed the limits specified by the NMEA 2000 standard to maintain signal integrity. Using this bulk micro cable allows optimized wiring by adapting lengths.

Yes, installing connectors on bulk NMEA 2000 cable typically requires specific tools, such as a wire stripper suited to the cable diameter and crimping or screw-type tools depending on the micro NMEA 2000 connector type. It is recommended to follow the manufacturer's instructions for the connectors.

This cable is compatible with all NMEA 2000-certified marine electronic equipment. The NMEA 2000 standard ensures interoperability between devices from different manufacturers.

Yes, due to its compliance with the NMEA 2000 standard, this cable is designed to be compatible with NMEA 2000 devices from any manufacturer, provided those devices are also NMEA 2000 certified.

NMEA 2000 certification guarantees that products have been tested and verified to meet critical safety criteria and to correctly implement network management and messaging. This ensures reliable interconnection and future compatibility between different devices on the network.

This cable is of the "micro" type. To use it with NMEA 2000 "Mini" or "Mid" cables, specific adapters or gateways are required, as the physical connectors differ. An NMEA 2000 network can integrate different cable types through these devices, but the micro cable requires micro connectors.

The NMEA 2000 standard uses a CAN bus communication protocol with a data rate of 250 kbit/s. This speed is considered high for marine networks and enables fast, reliable data transmission between devices.

No, this cable is designed for the NMEA 2000 standard. NMEA 2000 and NMEA 0183 are different communication standards and are not directly compatible with each other. Specific gateways are required to convert data between these two protocols.