Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 16%

Raymarine

E70242

Yamaha Command-Link 1M Cable

The Raymarine E70242 Yamaha Command-Link 1-meter cable is designed for direct interconnection between Yamaha engines and Raymarine navigation systems.

It ensures reliable transmission of engine data to your multifunction display, optimizing access to essential information. This product includes a 1-meter cable.

Retail priceBenefit from the professional rate

79,72€

79,72€ ~~95,00€~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Section (AWG)	22.0
Number of conductors	5.0
Color	Black
Max voltage	16.0
Shielding	Shielded
Flexibility	Flexible
Current type	DC
Outer diameter	7.0
Jacket material	PVC
Conductor material	Tinned copper
Certifications	CE
Conductor finish	Tinned
Cable type	CAN-bus cable
Cable length	1.0
Compatible network	Yamaha Command-Link, NMEA 2000
Pre-molded connectors	Yes
Installation location	Boat interior, marine environment
Cable application	Engine interconnection, data transmission and network power supply
Operating temperature	-20 to +70
Storage temperature	-30 to +80
Min bend radius	35
Connector type	Yamaha Command-Link (similar to NMEA 2000 Micro-C)
Shielding type	Sheet and braid
UV resistance	OK
Product type	Interface cable

Detailed description

The Yamaha Command-Link 1M Raymarine E70242 cable is designed for integrating Yamaha engines equipped with Command-Link connectivity into Raymarine navigation systems. This 1-meter cable enables the transmission of critical engine data to a compatible multifunction display, allowing users to view information such as engine RPM, fuel consumption, and other essential parameters directly on their Raymarine display.

Connectivity and compatibility

The connection via the E70242 cable provides a direct and reliable interface, eliminating the need for additional adapters or converters in many configurations. Its 1-meter length makes it suitable for installations where the engine unit and display are relatively close, or for extensions within an existing network. This component is essential for optimizing the navigation experience by centralizing engine data with navigation information.

Installation and usage

Designed for simplified installation, the Raymarine E70242 cable integrates into the boat’s existing network, ensuring stable and continuous communication. It is a key accessory for sailors seeking a consolidated view of engine performance and navigation data, improving onboard management and control. This cable is part of Raymarine’s Engine Control Interface and Accessories section.

Expert opinion

« The importance of Yamaha engine integration via Raymarine »

Engine data integration is a crucial aspect for managing and ensuring safety aboard a modern vessel. This Raymarine cable, specifically designed for the Yamaha Command-Link network, is a fundamental component for any Yamaha engine owner wishing to display vital engine information directly on their Raymarine multifunction display. Using a branded cable, such as this model, ensures optimal electrical and protocol compatibility, minimizing the risk of transmission errors or software incompatibilities that can occur with generic cables.

During installation, the 1-meter length must be carefully considered. While sufficient for short connections or extensions within a dashboard, it is essential to plan the cable routing to avoid excessive tension or electromagnetic interference. This cable is not a protocol converter but a direct interface, which simplifies troubleshooting in case of issues. It is an essential part of building a coherent and integrated navigation system, where quick access to engine data can influence navigation and maintenance decisions.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Yamaha Command-Link 1M Cable

79,72€

79,72€ ~~95,00€~~

Frequently Asked Questions

Need help? Contact us

What is the Raymarine E70242 cable used for?

The Raymarine E70242 cable is designed to connect Yamaha outboard motors equipped with the Command-Link system to Raymarine navigation electronics. It enables the transmission of critical engine data to a compatible Raymarine multifunction display, providing a centralized view of engine performance information.

What is the length of the Yamaha Command-Link E70242 cable?

Raymarine E70242 cable has a length of one meter (1M).

Which engine data does this cable transmit to Raymarine systems?

The E70242 cable transmits essential engine data, including:

Engine RPM (revolutions per minute)Fuel consumptionTrim levelEngine hoursEngine temperatureBattery voltageThese data are then displayed on compatible Raymarine multifunction displays.

Is the E70242 cable an original Raymarine product?

Yes, cable E70242 is an official Raymarine accessory, designed to ensure reliable integration with their navigation systems and compatible Yamaha engines.

Is this cable designed to withstand marine environments?

Yes, like all Raymarine products intended for navigation, the E70242 cable is made with robust materials and is designed to withstand harsh marine conditions, including humidity, salt, and temperature variations.

Is the Raymarine E70242 cable an NMEA 2000 cable?

No, the E70242 cable is a proprietary Yamaha Command-Link network cable. It is not a direct NMEA 2000 cable. It is used to connect the Yamaha engine to a Raymarine interface (often the ECI-100), which then converts Command-Link data into SeaTalkng/NMEA 2000 format for Raymarine multifunction displays.

What is the primary function of cable E70242 in a navigation system?

The primary function of cable E70242 is to establish a direct and reliable communication between a Yamaha engine equipped with the Command-Link system and the Raymarine engine control interface. It acts as a data bridge to centralize engine information on Raymarine navigation displays, thereby improving onboard management and control.

Is this cable shielded to prevent interference?

Marine communication cables of quality, such as the Raymarine E70242, are typically designed with shielding to minimize electromagnetic interference (EMI) and ensure stable, error-free data transmission in the complex electrical environment of a boat.

Is the E70242 cable supplied with specific connectors?

Yes, cable E70242 is fitted with Yamaha Command-Link specific connectors, ready to plug into the engine’s Command-Link network and into the compatible Raymarine interface.

Which Yamaha engine models is this cable compatible with?

This cable is compatible with Yamaha outboard engines equipped with the proprietary Command-Link network system. It is important to verify that your Yamaha engine has a Command-Link port to ensure compatibility.

Can this cable be used with Raymarine multifunction displays of all generations?

The E70242 cable is designed to integrate with modern Raymarine navigation electronics systems that can display engine data via a compatible interface (such as the ECI-100) and a SeaTalkng/NMEA 2000 network. Specific compatibility with your Raymarine display model will depend on its ability to interpret the data transmitted via the interface.

Do I need additional Raymarine equipment to use this cable?

Yes, in most cases, the E70242 cable must be connected to a Raymarine engine control interface, such as the Raymarine ECI-100 Universal Engine and Control Interface. This interface translates data from the Yamaha Command-Link network to the Raymarine SeaTalkng/NMEA 2000 network, enabling display on your multifunction display.

Can I connect this cable directly to a Raymarine display without an interface?

No, the E70242 cable cannot be connected directly to a Raymarine multifunction display. It requires an intermediate interface, such as the Raymarine ECI-100, to convert Yamaha Command-Link protocol data into a format compatible with Raymarine systems (SeaTalkng/NMEA 2000).

Does this cable work with Yamaha outboards not equipped with Command-Link?

No, this cable is specifically designed for Yamaha engines equipped with the Command-Link network system. It will not work with Yamaha engines using other communication protocols or lacking a Command-Link port.

Can the E70242 cable be installed by a non-professional?

Physically installing the E70242 cable—connecting it to the appropriate Command-Link ports—is relatively straightforward. However, fully integrating it into a Raymarine network and configuring the interface (such as the ECI-100) may require marine electronics expertise. For optimal installation and setup, it is often recommended to use a certified Raymarine installer.

How is the E70242 cable connected to the Yamaha engine?

The E70242 cable connects to an available port on your Yamaha engine’s Command-Link network. This port is typically located near the engine or inside the engine harness connection compartment. The connectors are specific and designed for easy, secure plug-in.

Is it possible to extend this cable by 1 meter if necessary?

Yes, it is possible to extend the E70242 cable by using appropriate Yamaha Command-Link extension cables. Ensure you use cables of the same specification and do not exceed the maximum recommended lengths for the Command-Link network to maintain signal integrity.

Is there a specific orientation for connecting the E70242 cable?

The connectors on cable E70242 are typically designed to fit in only one orientation, which reduces the risk of wiring errors. However, it is always advisable to consult the Yamaha engine and Raymarine interface installation manuals to confirm the specific ports and connection orientations.

What are the general steps to integrate this cable into a Raymarine system?

General integration steps are:

Connect one end of cable E70242 to the Yamaha Command-Link network of your engine. Connect the other end of cable E70242 to the Yamaha Command-Link input of the Raymarine ECI-100 interface (or a similar compatible interface). Connect the ECI-100 interface to the SeaTalkng/NMEA 2000 network of your Raymarine system. Power up the interface and the network. Configure the Raymarine multifunction display to show engine data.