External antenna extension collar kit

The Raymarine A80718 external antenna extension collar kit is an accessory designed to extend the mounting options for the 5-in-1 antenna supplied with the YachtSense Link marine cloud router. It allows this antenna to be installed on surfaces thicker than the antenna's standard threading would permit.

This kit resolves installation constraints when the deck or mounting structure thickness exceeds the standard thread length of the Raymarine YachtSense Link 5-in-1 antenna. It allows mounting the antenna on surfaces up to 60 mm (2.36 in) thick.

The Raymarine A80718 kit includes the following components:

A 30 mm extension collarA sealing gasket (gasket)A slotted M30 nutThese components are required to secure the antenna to a thick surface.

The extension collar has a total length of approximately 75 mm (2.95 inches). Its outer diameter is approximately 45 mm (1.77 inches), and the diameter of the central hole for the thread passage is 30 mm (1.18 inches).

Yes, the extension collar can be cut to the required size to fit precisely to the thickness of the mounting surface. It is important to ensure that the remaining length is sufficient for the surface thickness, the sealing gasket, and the nut, and to smooth the cut edge to avoid damaging the antenna cables.

Yes, the kit includes a gasket that must be placed under the antenna, on the mounting surface, to help ensure the installation is watertight once the antenna is secured.

Yes, the Raymarine A80718 external antenna extension collar kit is an original accessory for their marine equipment.

This kit is specifically designed for the 5-in-1 antenna supplied with the Raymarine YachtSense Link marine cloud router.

No, the A80718 extension collar kit is specifically designed for the Raymarine YachtSense Link 5-in-1 antenna. Its design and dimensions are tailored to this particular antenna and do not ensure compatibility or performance with other antenna models.

This kit is an accessory for the Raymarine YachtSense Link 5-in-1 antenna. It is not directly compatible with other marine routers, but it allows installation of the dedicated antenna for the YachtSense Link.

The A80718 antenna extension collar kit allows mounting the antenna on surfaces up to 60 mm (2.36 inches) thick.

To install the extension kit, it is necessary to drill a 30 mm (1.18 inch) diameter hole in the center of the chosen mounting location.

The extension collar must be hand-tightened, with a torque not exceeding 1.47 N·m (1.08 lbf·ft). The M30 slotted nut must be tightened using a 45 mm wrench or a large adjustable wrench, with a maximum tightening torque of 1.47 N·m (1.08 lbf·ft).

The extension collar features a dedicated slot that makes it easier to route the antenna cables. Simply pass the cables through this slot before screwing the collar onto the antenna's thread.

The antenna must be installed in a location with a clear line of sight to the sky. It is also important to keep it away from any structures or devices that could cause interference to ensure optimal performance of the YachtSense Link system.

If you cut the clamp, ensure the remaining length is sufficient for the mounting surface thickness, the gasket, and the nut. After cutting, it is mandatory to file the cut edge smooth to prevent any damage to the antenna cables during installation.

No, the A80718 extension collar kit does not include the tools required for tightening the M30 nut. You will need a 45 mm spanner or a large adjustable wrench for this step of the installation.

Installing the kit requires basic DIY skills, including drilling a 30 mm hole and tightening by hand or with a wrench. The provided instructions detail the steps to follow for correct installation.

The kit is designed for installation on flat surfaces, where the antenna and the sealing gasket can lie flat and ensure optimal sealing. A curved surface could compromise the sealing and the stability of the installation.

The Raymarine A80718 external antenna extension collar kit allows mounting the 5-in-1 antenna supplied with the YachtSense Link marine cloud router on surfaces up to 60 mm (2.36 inches) thick. This kit is particularly useful when the deck or mounting structure thickness exceeds the antenna's standard thread length. The collar can be trimmed to length for precise fit to the mounting surface thickness. Installation requires drilling a 30 mm (1.18 inch) hole at the center of the chosen location.