Sonde plastique tableau HV-100+ HyperVision (Câble 6m)

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 10%

Raymarine

E70643

HV-100+ HyperVision plastic through-hull sonar (6m cable)

The Raymarine HV-100+ HyperVision plastic hull-mounted transducer (E70643) delivers ultra-high-resolution sonar imaging (DownVision, SideVision, RealVision) via HyperVision™ technology. Designed for easy installation on the transom, it includes a mounting bracket and a 6m integrated cable for direct connection to compatible Raymarine multifunction displays. This transducer is a key component for Element and Axiom systems, enhancing structure and fish detection.

Retail priceBenefit from the professional rate

265,45€

265,45€ ~~295,00€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Supported sonar technologies	DownVision, SideVision, RealVision 3D, HyperVision CHIRP
Fishfinder frequencies	200, 350, 1200
Operating temperature	-25°C to +55°C
Max depth reading	274.0
Transducer material	Plastic
Sonar connector type	Raymarine connector
Cable length	6.0
Product width	57.00
Integrated temperature sensor	Yes
Product height	31.5
Compatible displays	Raymarine Element, Raymarine Axiom
Product depth	204.6
IP rating	IPX8
Mounting type	Transom panel
Certifications	EMC 2014/30/EU
Temperature measurement range	-25°C to +55°C
Beam coverage angle	3D: 180°, DownVision: 60°, Conical: 25°
CHIRP high frequency	1200
CHIRP low frequency	200
Fishing type	Sea, Lake, River, Vertical, Trolling
Integrated speed sensor	No
Release year	2019.0

Detailed description

The Raymarine HV-100+ HyperVision plastic through-hull sonar (part number E70643) is designed to provide detailed sonar imaging from the transom of your vessel. Featuring HyperVision™ technology, this transducer delivers DownVision, SideVision, and RealVision views, offering improved clarity for identifying structures and fish.

HyperVision™ Technology for Superior Clarity

Raymarine’s HyperVision™ system uses higher frequencies to produce ultra-high-resolution sonar images. This HV-100+ transducer excels at delivering precise renderings of the seabed and underwater targets, even at moderate depths, providing a significant advantage over conventional transducers. Unlike a through-hull transducer such as the HV-300 (part number A80604), the HV-100+ is specifically designed for transom installation, simplifying installation for many types of vessels.

Installation and Compatibility

Designed for transom mounting, the HV-100+ HyperVision transducer (E70643) comes with a 6-meter integrated cable for easy connection to compatible Raymarine multifunction displays. Installation is straightforward and does not require complex hull drilling, unlike through-hull models. It is ideal for anglers and navigators seeking a high-performance sonar imaging solution without the constraints of a through-hull installation.

Documentation

Type	Nom
	EN - Notice d'installation - Sonde plastique tableau HV-100+ HyperVision (Câble 6m)
	EN - Notice d'installation - Sonde plastique tableau HV-100+ HyperVision (Câble 6m)
	EN - Notice d'installation - Sonde plastique tableau HV-100+ HyperVision (Câble 6m)
	FR - Notice d'installation - Sonde plastique tableau HV-100+ HyperVision (Câble 6m)
	EN - Gabarit de montage - Sonde plastique tableau HV-100+ HyperVision (Câble 6m)
	EN - Gabarit de montage - Sonde plastique tableau HV-100+ HyperVision (Câble 6m)
	EN - Notice d'installation - Sonde plastique tableau HV-100+ HyperVision (Câble 6m)
	EN - Notice d'installation - Sonde plastique tableau HV-100+ HyperVision (Câble 6m)
	FR - Notice d'installation - Sonde plastique tableau HV-100+ HyperVision (Câble 6m)
	EN - Gabarit de montage - Sonde plastique tableau HV-100+ HyperVision (Câble 6m)
	EN - Gabarit de montage - Sonde plastique tableau HV-100+ HyperVision (Câble 6m)

Expert opinion

Pol CONIN

Digital Manager

« Technical analysis: Raymarine HV-100+ HyperVision transducer for transom mount »

The Raymarine HV-100+ HyperVision is a transom-mounted sonar imaging solution particularly well-suited for recreational boats and sport fishing. Its main advantage lies in the HyperVision technology, which uses high frequencies to deliver significantly finer imaging resolution of underwater structures and fish schools compared to traditional CHIRP sonar. For users of Raymarine Element or Axiom multifunction displays, this transducer unlocks the full potential of RealVision 3D, DownVision, and SideVision imaging, providing clear seabed mapping useful for exploring specific fishing grounds or navigating shallow waters.

In terms of installation, the HV-100+ is a transom-mounted transducer, which greatly simplifies the process compared to a through-hull transducer like the HV-300. It eliminates hull fairing and drilling, making installation accessible to a wider audience and reducing installation costs. It is crucial to select a location on the transom free of turbulence to maximize signal quality. I recommend testing several positions before permanently securing the bracket. Although designed for easy installation, careful attention must be paid to routing the 6m cable to avoid electromagnetic interference and ensure adequate mechanical protection.

This transducer is particularly well-suited for medium-sized powerboats where speed is not excessive and a through-hull installation is not desirable. For faster or larger vessels, a through-hull transducer may offer better high-speed performance. The HV-100+ excels in lateral and vertical detection, which is highly valued for locating fishing spots. Its performance-to-installation ease ratio makes it a wise choice for a significant upgrade to your Raymarine sonar system.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

HV-100+ HyperVision plastic through-hull sonar (6m cable)

265,45€

265,45€ ~~295,00€~~

Frequently Asked Questions

Need help? Contact us

What is the main technology used by the HV-100+ HyperVision depth sounder?

The HV-100+ transducer uses Raymarine's HyperVision™ technology. This technology employs higher frequencies to generate ultra-high-resolution sonar images. It provides detailed views of the seabed and underwater targets, offering superior clarity for identifying structures and fish.

What types of sonar views does the HV-100+ HyperVision depth sounder offer?

The HV-100+ HyperVision transducer provides access to multiple advanced sonar view types:

DownVision™: For a detailed view beneath your vessel.SideVision™: For an extended side view of structures and fish around your boat.RealVision™: For realistic 3D imaging of the underwater environment.

How is the Raymarine HV-100+ transducer installed?

The HV-100+ transducer is designed for installation on the transom of your vessel. It mounts directly and does not require complex hull drilling, unlike through-hull models. It comes with a built-in 6-meter cable to simplify wiring. Raymarine’s installation instructions should be followed to ensure optimal performance.

With which Raymarine multifunction displays is the HV-100+ transducer compatible?

The HV-100+ HyperVision transducer is compatible with Raymarine multifunction displays featuring RealVision or HyperVision technology. It is specifically designed to work with the Raymarine Element series. For other series such as Axiom, a RealVision MAX integrated transducer or a compatible external sonar module may be required depending on the model.

Is it possible to use antifouling paint on the HV-100+ depth sounder?

Yes, it is possible to apply antifouling paint to the HV-100+ transducer. However, it is imperative to use only water-based antifouling paint. Under no circumstances should ketone-based or copper-based antifouling paint be used, as this could damage the transducer and affect its performance. Failure to comply with this instruction may also void the product warranty.

Can the HV-100+ transducer be tested out of water?

No, it is critical never to test or operate the HV-100+ transducer solely in water. Operating the transducer out of water can cause overheating and irreparably damage the device.

Which type of sealant should be used for installing the HV-100+ depth sounder?

For installation of the HV-100+ transducer, it is recommended to use only neutral-cure polyurethane sealants of marine grade. Do not use sealants containing acetate or silicone, as these substances can damage the plastic components of the transducer.

Does the HV-100+ transducer include a temperature sensor?

Yes, the HV-100+ HyperVision transducer is equipped with a temperature sensor. This sensor is typically located at the rear of the transducer and provides water temperature data to your compatible multifunction display.