i40 Bidata

The Raymarine i40 Bidata instrument is designed to clearly display depth and speed data. It provides dedicated display pages for these two types of data, allowing users to switch between them for continuous monitoring of essential navigation information.

Yes, the i40 Bidata display is designed for optimal readability. It features adjustable backlight and contrast settings, allowing you to optimize screen visibility in bright sunlight, low-light conditions, or at night.

Yes, the Raymarine i40 Bidata instrument includes calibration functions for depth and speed. This ensures the accuracy of displayed measurements, allowing users to adjust parameters to match their boat's specific conditions and sensors.

The Raymarine i40 Bidata instrument is IPX6 waterproof compliant. However, it is important to note that exposing the device to a high-pressure washer jet may cause water ingress and is not covered by the Raymarine warranty.

To clean the i40 Bidata instrument, do NOT use abrasive, acidic, or ammonia-based products. Additionally, do NOT clean the device with a high-pressure washer. Gentle cleaning with products suitable for marine electronics is recommended to preserve the integrity of the unit.

Yes, certain atmospheric conditions can cause slight condensation to form on the unit’s window. This will not damage the unit and will disappear after a short period of operation.

Yes, the i40 Bidata can act as a data source within a SeaTalk system. It is capable of transmitting depth and speed data it receives from its sensors to other instruments connected on the same SeaTalk network.

The i40 Bidata instrument has controls to adjust various functions. These include adjusting the screen backlight, tuning the contrast for better visibility, and accessing calibration functions for depth and speed.

The i40 Bidata instrument allows you to adjust the screen backlighting. This function is accessible via the device controls, optimizing display visibility in various lighting conditions, whether in full daylight or at night.

The contrast of the i40 Bidata display can be adjusted by the user. This feature is available via the instrument settings, allowing you to improve the clarity of the displayed numbers and symbols based on the viewing angle and ambient lighting conditions.

The Raymarine i40 Bidata instrument is compatible with Raymarine SeaTalk 1 and SeaTalk NG networks. This dual compatibility provides flexibility for integration into existing installations or new systems.

The i40 Bidata can connect to a range of compatible sensors. This includes depth, speed, and temperature (DST) sensors, as well as Rotavecta sensors. These sensors provide the data required to display depth and speed.

No, it is imperative not to connect the Raymarine i40 Bidata unit to a system with a positive ground. The device must be properly connected to ground in accordance with the installation instructions to prevent any damage.

The Raymarine i40 Bidata is designed for versatile installation. It offers flush mounting options for a discreet integration into the dashboard, or bracket mounting for surface installation.

The i40 Bidata’s power supply can be managed via several options: a direct connection, via the SeaTalk 1 network, or via the SeaTalk NG network. Each configuration has specific inline fuse requirements.

Yes, an inline fuse is required for powering the i40 Bidata instrument, regardless of the connection method (SeaTalk NG, SeaTalk 1, or direct connection). The installation manual provides specific fuse requirements for each configuration.

Yes, it is critical NOT to cut, shorten, or splice the depth sounder cable, nor to remove its connector. If the cable is severed, it cannot be repaired and this also voids the manufacturer's warranty.

During installation, it is recommended to position the i40 Bidata at least 1 metre (3 feet) away from any device emitting or any cable carrying radiofrequency signals (such as VHF transceivers, their cables, and antennas). For an SSB radio, this distance must be increased to 2 metres (7 feet). It must also be more than 2 metres (7 feet) away from the path of a radar beam.

When installing the i40 Bidata, it is important to maintain a safe distance from the compass. This distance, called the compass safe distance, is specified in the installation manual to prevent any magnetic interference with your boat's compass.

No, the i40 Bidata instrument contains components that generate high voltage. Adjustments and repairs require specialized service procedures with tools available only to qualified maintenance technicians. The operator must never remove the cover or attempt to repair the product.