Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Sold out

Raymarine

IS216

Motion detector

Name: Motion detector
Brand: Raymarine
SKU: IS216
Price: 33.60 EUR
Availability: OutOfStock

The IS216 is a compact PIR motion detector for monitoring an interior or technical area.

Retail priceBenefit from the professional rate

33,60€

33,60€ ~~40,00€~~

Shipping calculated at checkout.

Out of stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Compatible models	SIM100; DSM150/DSM250; N2KView; N2KAnalyzer via USB100/IPG100
Installation type	PIR motion detector wired via NC/NO relay to SIM100 module
NMEA 2000	Via SIM100 module; the IS216 detector does not connect directly to the NMEA 2000 backbone
Operating voltage	9-16 VDC
Package contents	IS216 motion detector; follow the included manufacturer instructions for installation
Power source	DC power protected by fuse
Relay output	NC/C (Normally Closed / Common), relay opens on motion detection

Detailed description

Le IS216 est un détecteur de mouvement PIR compact destiné à la surveillance d’une zone intérieure ou technique. Il sert à détecter une présence ou un mouvement dans une installation de sécurité compatible.

Son boîtier blanc et son format discret facilitent une intégration dans une installation de surveillance. Vérifiez la compatibilité avec votre centrale ou système d’alarme avant installation.

Points clés

Détection de mouvement par capteur PIR.
Boîtier blanc compact adapté à une intégration discrète.
Usage recommandé dans une zone intérieure, sèche ou protégée.

Documentation

Type	Nom
	EN - Motion Detector Installation Instructions
	EN - Maretron Product Catalog 2025

Payment and security

Your payment information and data are processed securely.

Motion detector

33,60€

33,60€ ~~40,00€~~

Frequently Asked Questions

Need help? Contact us

What is the IS216 detector used for?

The IS216 is a PIR motion detector designed to monitor an interior or technical area. In a Maretron installation, it can be used to display a motion status and trigger an alert via the SIM100 module.

Does the IS216 connect directly to NMEA 2000?

No. The Maretron manual states that the IS216 connects to a free channel on the SIM100 Switch Indicator Module. The SIM100 then publishes the status on the NMEA 2000 network.

What power supply is required?

The installation manual specifies connecting the V+ and V- terminals of the IS216 to a 9–16 VDC power supply properly protected by a fuse.

Which type of sensor is used for detection?

The IS216 uses the NC (normally closed) and C (common) terminals of the relay. When movement is detected, the relay opens, and the SIM100 interprets this state as a detection condition.

Is any configuration required on the SIM100?

Yes. The SIM100 channel must be configured for the detector’s use, particularly with the No End of Line Resistor mode, a clear label, and then a display or alert in DSM/N2KView depending on the installation.

Why can a power or wiring failure trigger an alert?

The Maretron manual states that lack of movement, a power cut, or a disconnected wire will change the status transmitted to the SIM100. This behavior is intentional to also indicate a power loss or a communication link failure.