Transducteur CC 400 A avec câble pour le DCM10

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 20%

Raymarine

LEMHTA400-S

DC 400 A current transducer with cable for DCM10

Raymarine LEMHTA400-S 400 A DC current transducer with cable, for DCM10 monitor.

Retail priceBenefit from the professional rate

136,28€

136,28€ ~~170,00€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Communication protocol	Sensor signal to DCM10 display
Current measurement range	0 to 400 A DC
Display type	None
Operating voltage range	DCM10-monitored DC system
Power source	Via DCM10 display
Service battery monitoring	Yes
Shunt included	No
Shunt rated current	400 A
Shunt specification	400 A DC current transducer with cable
Starter battery monitoring	According to DCM10 installation

Detailed description

The Raymarine LEMHTA400-S is a 400 A DC current transducer with cable, designed for the DCM10 monitor. It measures the current in a DC circuit within an electrical monitoring system.

Usage

This part is a measurement accessory for battery or current monitors, not just a cable. The 400 A rating must be selected according to the circuit to be monitored and the DCM10 configuration.

Documentation

Type	Nom
	EN - Brochure technique - Transducteur CC 400 A avec câble pour le DCM10
	EN - Brochure technique - Transducteur CC 400 A avec câble pour le DCM10

Expert opinion

« 400 A DC current shunt for monitoring »

The LEMHTA400-S must be treated as a current measurement element for DCM10. Its value depends on selecting the correct range for the monitored DC circuit and on installation that complies with the monitor's diagram.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

DC 400 A current transducer with cable for DCM10

136,28€

136,28€ ~~170,00€~~

Frequently Asked Questions

Need help? Contact us

What measurement accuracy can be expected with this transducer?

The product description highlights "precise measurement" and "detailed visibility" of the current. While a percentage accuracy specification is not provided, it is designed for reliable monitoring of marine electrical systems.

Can this transducer be used to monitor DC solar or wind power generation?

Yes, if these sources produce direct current and are integrated into the circuit that the transducer monitors, it can provide accurate data on their power output via the DCM10 monitor, enabling complete energy management.

With which Raymarine device is this transducer specifically compatible?

This transducer is specifically designed for use with the Raymarine DCM10 DC monitor. It is an essential accessory for this device.

Can this transducer be used with other brands of current monitors?

No, the product description clearly states it is an "accessory for the DCM10 DC monitor", which implies specific and exclusive compatibility with this Raymarine device.

Is the Raymarine CC 400 A transducer compatible with Raymarine multifunction displays (MFD)?

Yes, once connected to the DCM10 monitor, the current data collected by the transducer can be viewed and centralized on Raymarine multifunction displays or dedicated displays, providing full integration with the navigation system.

Is this transducer compatible with NMEA 2000 systems?

The product description does not directly specify NMEA 2000 compatibility for this transducer. Its function is to communicate with the DCM10. NMEA 2000 compatibility would depend on the DCM10 itself and its integration into the vessel's network.

Is this transducer compatible with the Maretron DCM100 mentioned in some documents?

The product is explicitly named "[RAYMARINE] DCM10 DC Current Transducer with Cable". It is designed for Raymarine’s DCM10 DC monitor. We cannot guarantee compatibility with a Maretron DCM100, as it is a different brand and model.

Does the supplied connection cable simplify the installation of the transducer?

Yes, the connection cable is included and is designed to facilitate the connection of the transducer to the DCM10 DC monitor, simplifying the installation process.

Does installing this transducer require specific electrical skills?

Given that this is an electrical monitoring component for an embedded system, it is strongly recommended that installation be carried out by someone with proven knowledge of marine electrical systems to ensure correct, secure, and standards-compliant connections.