Gen2 - OctoPlex 8" touchscreen (TSM810C), front-mount only, with CodeSys preinstalled

This display is specifically designed to serve as the primary user interface for the OctoPlex G2-Series vessel management system. It enables interaction with all components of this system.

Main functions of the TSM810C display include:

Centralized control and monitoring of AC and DC loads.Management of field-replaceable AC and DC circuit breakers.System status reports and alarm visualization.Interface with other NMEA 2000 devices connected to the OctoPlex system.

The TSM810C display is the interface of an OctoPlex G2-Series system that uses a NMEA 2000 CAN bus with a redundant architecture. This design eliminates single points of failure, contributing to increased reliability of the entire ship management system.

The TSM810C touchscreen has an 8-inch display.

Via the TSM810C display, the OctoPlex G2-Series system enables control and monitoring of all AC and DC loads on board.

Yes, the TSM810C display acts as a dedicated multifunction display (MFD), providing an interface to view status reports and alarms generated by the OctoPlex system.

Yes, the OctoPlex system uses a NMEA 2000 CAN bus network and enables control and monitoring of multiple NMEA 2000 devices such as compasses, GPS units, and tank level sensors.

The TSM810C display, as part of the OctoPlex G2-Series system, holds the following certifications:

CE ApprovedCompliance with IEC60533 and IEC60945 standards for marine electrical and electronic installations.NMEA 2000® Approved (Category B)Lloyd’s Type Approved (Test Specification #1, ENV2 Certificate No. 10/00021).

The OctoPlex system reduces wiring quantity and installation complexity compared to traditional electrical panels by using a NMEA 2000 CAN bus network that centralizes communication and control.

Yes, the TSM810C display allows remote management of field-replaceable AC and DC circuit breakers, which are integral to the OctoPlex system.

Yes, the TSM810C is a dedicated multifunction display (MFD) providing a simple and fully configurable interface for OctoPlex system control and monitoring.

Yes, the OctoPlex G2-Series system, including the TSM810C display, is NMEA 2000® Approved (Category B), ensuring compliance and interoperability with other NMEA 2000 certified devices.

The TSM810C display is the interface for the OctoPlex G2-Series system. This system is designed to monitor and control AC power lines, and AC power distribution units can be used in 110V, 220V, three-phase, and 240V European applications. The display will show information from these systems.

The redundant architecture of the CAN bus network, used by the OctoPlex system, ensures increased reliability and security by eliminating single points of failure. This means the system can continue to operate even if a part of the network fails.

Yes, via the OctoPlex system, the TSM810C display can be used to monitor NMEA 2000 devices such as tank level sensors and GPS, displaying their data.

This touchscreen is manufactured by Raymarine and is part of the OctoPlex G2-Series.

Yes, the TSM810C display is designed for marine environments. It is CE Approved certified and meets IEC60533 and IEC60945 standards for marine electrical and electronic installations, attesting to its robustness and compliance with nautical requirements.