CLMD12 - Output connector (J1) with 1 m flying leads

The A3706 connector is supplied with 1-meter (1 m) flying leads. This length provides sufficient flexibility to route the cables to the appropriate terminals without requiring additional extensions in most installations.

Yes, the A3706 connector is a pre-assembled component. It includes the J1 connector and the flying leads already wired, which greatly simplifies its installation on the CLMD12 module.

Using the A3706 connector offers several advantages:

Simplification: It replaces the need to wire each module output individually. Reliability: It ensures a secure and organized connection, reducing wiring error risks. Time saving: Wiring is faster thanks to its pre-assembled design. Flexibility: One-meter cables allow easy routing to loads.

No, the A3706 connector is not a DC charging module. It is an accessory, an output connector, specifically designed to be used with the CLMD12 DC charging module. The CLMD12 module is the unit that manages DC charging, and the A3706 is its connection interface.

The A3706 connector is designed to carry the outputs of the CLMD12 DC charge module. Therefore, it allows connection of various DC loads found on a vessel, such as lighting, pumps, navigation equipment, or other DC-powered devices.

No, the A3706 connector is specifically designed for the J1 output port of the CLMD12 module. It is not compatible with other ports or connectors on this module or any other equipment.

No, the A3706 connector is a dedicated accessory for the CLMD12 DC charging module. Its design and pinout are specific to this module, making it incompatible with DC charging modules from other brands or models.

Yes, the CLMD12 module, which uses this A3706 connector, is part of the NMEA 2000 digital power distribution systems. This enables remote monitoring and control via the NMEA 2000 network.

The A3706 connector must be plugged into the J1 output port of the CLMD12 DC charge module. This port is the dedicated interface for DC load connections.

The A3706 connector simplifies electrical integration by providing a pre-assembled wiring solution for the CLMD12 module outputs. Instead of individually wiring each output, this connector enables a quick and clean connection to the J1 terminal block, streamlining the installation process.

The one-meter length of the flying leads provides sufficient slack to route cables from the CLMD12 module to a distribution panel, junction box, or directly to loads. This flexibility allows optimal positioning of the module and clean cable routing without requiring immediate extensions.

Connecting the A3706 connector to port J1 of the CLMD12 module generally does not require specific tools, as it is a direct connection. However, standard electrician tools (such as wire strippers or crimping pliers) may be needed to connect the ends of the flying leads to loads or a distribution panel.

No, the A3706 connector is designed for solderless connection to the CLMD12 module. Flying leads are intended to be connected to loads via terminal blocks, crimp connectors, or other standard electrical connection methods, without requiring complex on-site soldering.

The A3706 connector is particularly recommended for installations where the CLMD12 module is mounted near a distribution panel or junction box. Its design with 1-meter flying leads is ideal for clean and efficient integration in these configurations.

Yes, by providing a pre-assembled solution with cables clearly identified (by their position on the J1 connector), the A3706 connector helps minimize wiring errors that could occur during manual, individual connection of each output wire from the module.