SAE 5-hole mount, F/T flush-mount model

Since this is a standard mounting hull, its compatibility with fluids depends mainly on the level sensor that will be installed. The hull itself is a support and does not come into direct contact with the fluid. Compatible sensors (ultrasonic, pressure) can be used for fuel, fresh water, wastewater, or oil, depending on their own specifications.

The "SAE 5-hole" standard (Society of Automotive Engineers) is a common mounting configuration that specifies a pattern of five bolt holes around a central opening. This standard ensures compatibility and interchangeability between different sensors and brackets from various brands, making installation and replacement easier.

Float-type sensor: Typically uses a float that rises and falls with the liquid level, activating a switch or potentiometer to indicate the level. Non-contact sensor: Measures the level without direct physical contact with the fluid or without moving parts in the liquid. Examples include ultrasonic sensors (which send sound waves), pressure sensors (which measure hydrostatic pressure), or capacitive sensors. The TFT-5H hull is designed for the latter.

Although the exact dimensions of the Raymarine TFT-5H display housing are not specified, the SAE 5-hole standard generally implies a bolt circle diameter of approximately 2.125 inches (about 54 mm) and a central opening of about 1.5 inches (about 38 mm) for the sensor. These dimensions may vary slightly depending on the manufacturer, but the 5-hole pattern is standardized.

Yes, when correctly installed with an appropriate sealing gasket and a compatible sensor, the SAE 5-hole housing is designed to ensure reliable tank sealing. It is crucial to use the recommended gaskets and torque values during installation to prevent any leaks.

The TFT-5H hull is compatible with tank level sensors using the SAE 5-hole mounting standard and of the 'non-displacement' type. This typically includes ultrasonic, pressure, or capacitive sensors that adhere to this mounting configuration.

Yes, since the Raymarine TFT-5H hull uses the SAE 5-hole mounting standard, it may be compatible with sensors from other brands that also comply with this standard. However, it is always recommended to check the mounting specifications of the third-party sensor to ensure perfect compatibility and adequate waterproofing.

The Raymarine TFT-5H hull itself is a mechanical mounting component and is not directly a NMEA 2000 device. Its compatibility with NMEA 2000 systems will depend on the tank level sensor you choose to install inside the hull. If the sensor is NMEA 2000-certified, the assembly can integrate into such a network.

The Raymarine TFT-5H transducer can be installed on tanks made from common nautical materials such as plastic (polyethylene, polypropylene), aluminum, stainless steel, or fiberglass. Installation requires that the tank can be drilled to accommodate the SAE 5-hole pattern and that its surface is sufficiently flat to ensure proper sealing.

The hull itself does not impose a direct restriction on sensor depth, as it is a surface support. However, the level sensor you choose must be specifically sized for your tank's depth to accurately measure fluid level. Ensure the sensor can pass through the central opening of the hull and is suitable for your tank's height.