Satellite reception antenna 60STV HD Gen 2 Australia (replaces E42194-2)

The Raymarine 60STV HD GEN 2 Australia antenna (part number E70475) is a satellite TV system designed for receiving hundreds of TV channels at sea or in harbor. This system automatically identifies, acquires, and tracks compatible signals from DVB satellites (Digital Video Broadcasting).

The E70475 model is specifically configured for receiving linearly polarized signals in the Australian region.

This antenna is designed to receive DVB signals (digital video broadcasting). The E70475 model is configured for linear polarization, which is used in regions such as Australia, Europe, New Zealand, China and the Middle East.

Yes, the 60STV HD GEN 2 antenna is a satellite TV system capable of receiving HD signals, providing access to hundreds of high-definition TV channels, subject to subscription to the relevant services.

The STV Gen2 range includes the 37STV, 45STV and 60STV Gen2 models. These systems are designed to automatically identify, acquire and track compatible signals from DVB satellites, providing access to television at sea or in harbor. They are available in variants adapted to different geographical regions and polarization types.

Yes, several precautions must be observed:

The product must be installed and used in accordance with the provided instructions.The power supply must be protected by a fuse or circuit breaker of the appropriate rating.When lifting, always grasp the unit by its base and avoid damaging the connectors under the base.Before installation or use, open the antenna unit housing and remove the foam shipping inserts.

No, it is essential not to paint or apply any other finish on the antenna unit. This could degrade its performance beyond acceptable limits.

For optimal EMC performance, it is recommended to:

Install Raymarine equipment and cables at least 1 meter away from any radio equipment or cables (2 meters for HF radios and radar beams).Power the product from a separate battery from the engine starter battery.Use the cables specified by Raymarine.Ensure cables are neither cut nor extended unless detailed in the installation manual.

Yes, Raymarine cables can be fitted with EMI suppression ferrites, which are important for correct EMC performance. If you connect your Raymarine equipment to another device using a cable not supplied by Raymarine, an EMI suppression ferrite MUST always be attached to the cable near the Raymarine unit.

Before modifying the mounting surface, ensure that the printed template matches the measurements indicated in the template document. It is necessary to correctly configure Adobe Acrobat to ensure that installation templates print to scale. Check the print settings, particularly the page size, to ensure it matches the one identified in the document properties.

No, the 60STV HD GEN 2 (E70475) antenna is configured to receive linearly polarized signals, specifically for the Australia region. While it can operate in other regions using linear polarization (such as Europe, New Zealand, China, the Middle East), it is not compatible with regions using circular polarization (such as North America) without modification.

If you change geographic region, you may need to modify your TV system. This can include adjusting the antenna’s LNB head and updating region settings via the ACU or a PC running the GUI software. It is also critical to verify that your satellite receivers (IRD) will function and receive DVB signals at your new location.

Yes, to access all features of your STV system and receive television channels, you must subscribe to the relevant services from the appropriate satellite service provider(s). The antenna receives the signals, but content access depends on the subscription.

Raymarine equipment and accessories are designed to comply with Electromagnetic Compatibility (EMC) regulations. To minimize interference, it is recommended to maintain a minimum distance of at least 1 meter (or 2 meters for certain equipment) between the antenna and other radio equipment or cables.

The Raymarine STV Gen2 series includes models 37STV Gen2, 45STV Gen2, and 60STV Gen2. The E70475 model is the 60STV Gen2.

To register ownership of your STV satellite TV system and receive all warranty benefits, you can fill out the warranty registration card provided in the box, or visit the website www.raymarine.com and register online. It is recommended to affix the barcode label showing the unit’s serial number to the registration card.

It is important to have all maintenance or component replacement performed by Raymarine authorized agents to ensure proper operation and warranty validity of the system.

Yes, this product complies with the EMC Directive 2004/108/EC and is labeled with the CE conformity mark.

Up-to-date coverage maps and satellite information can be found on the appropriate website of your satellite service provider.

For optimal EMC performance, it is recommended to use cables specified by Raymarine. These cables must not be cut or extended unless explicitly detailed in the installation manual. If anti-interference ferrites are present on Raymarine cables, they are important for EMC performance and must be reinstalled if removed. For cables not supplied by Raymarine, an anti-interference ferrite must always be attached near the Raymarine unit.