Satellite reception antenna 37 STV Gen2 Australia

The Raymarine 37 STV Gen2 Australia satellite reception antenna is designed for marine environments. It provides stable access to hundreds of TV channels whether you are at sea or moored. The system automatically identifies, acquires, and tracks compatible signals transmitted by DVB (Digital Video Broadcasting) satellites.

The Australian version of the 37 STV Gen2 antenna is specifically configured for regions such as Australia, New Zealand, China, and the Middle East.

This Gen2 37 STV antenna version is specifically configured for linear polarization, suitable for the regions mentioned above.

Yes, the Raymarine 37 STV Gen2 satellite TV system is designed to provide stable TV access whether your boat is offshore or moored at the harbor.

Yes, to access all features of your STV system, you must subscribe to the relevant satellite service providers.

The 37 STV Gen2 is part of Raymarine's second-generation STV models, which also include the 45 STV Gen2 and 60 STV Gen2 versions.

Yes, the Raymarine satellite TV system automatically identifies, acquires, and tracks compatible signals broadcast by DVB satellites.

No, it is imperative not to paint the antenna unit or apply any other finish, as this could degrade its performance beyond acceptable limits.

Yes, this product complies with EU Directive 2004/108/EC (electromagnetic compatibility) and bears the CE marking of conformity.

You must dispose of this product in accordance with the WEEE Directive (Waste Electrical and Electronic Equipment), which requires the recycling of electrical and electronic devices.

Before installing or using the product, you must open the antenna unit housing and remove the transport foam blocks from the base of the unit.

When installing this product, ensure the power source is adequately protected by a properly rated fuse or automatic circuit breaker.

When lifting the antenna unit, always grasp it by the base plate. Do not lift it by the antenna cover to avoid damage, and do not grasp the connectors beneath the base.

For optimal EMC performance, it is recommended to keep Raymarine equipment and its cables at least 1 meter away from any device transmitting radio signals (such as VHF radios) and at least 2 meters away from SSB (Single Sideband) radios.

The antenna and its cables must be kept at least 2 meters away from the path of a radar beam. A radar beam typically extends over a sector of 20 degrees above and below the radiating element.

If your Raymarine equipment must be connected to another device using a cable not supplied by Raymarine, a ferrite choke MUST always be attached to the cable near the Raymarine unit.

Yes, if you change your navigation zone, it may be necessary to update the region information via the control unit (ACU) or a PC, and adjust the antenna’s receiving head (LNB). You will also need to ensure that your satellite receivers can operate and receive DVB broadcasts at your new location.

Yes, the Raymarine 37 STV Gen2 satellite TV system is designed to automatically identify, acquire, and track compatible signals transmitted by DVB (Digital Video Broadcasting) satellites.

To register ownership of your STV satellite TV system, you can complete the warranty registration card provided in the box or register online at www.raymarine.com.