Transducteur de pression submersible 0-5 PSI - 4-20 mA

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 13%

Raymarine

PTS-0-5PSI-02

Submersible pressure transducer 0-5 PSI - 4-20 mA

Raymarine PTS-0-5PSI-02 submersible pressure transducer, 0-5 PSI range, 4-20 mA output for low-pressure monitoring.

Retail priceBenefit from the professional rate

389,39€

389,39€ ~~450,00€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Product role	Submersible pressure transducer
Measured parameters	Pressure / low pressure level
Measurement range	0-5 PSI
Communication protocol	4-20 mA
Data output	4-20 mA
Supply Voltage	10-30 V DC
Mounting type	Submersible
IP rating	IP68
Housing material	Stainless steel

Detailed description

The Raymarine PTS-0-5PSI-02 is a submersible pressure transducer with a 0-5 PSI measurement range and 4-20 mA output.

Its low pressure range is designed for level or low-pressure measurements in marine environments. Integration into the onboard network requires a module compatible with a 4-20 mA input.

Documentation

Type	Nom
	EN - Brochure technique - Transducteur de pression submersible 0-5 PSI - 4-20 mA
	EN - Brochure technique - Transducteur de pression submersible 0-5 PSI - 4-20 mA

Expert opinion

« Pressure transducer 4-20 mA: accuracy and system integration »

To be chosen for low-pressure or level measurement, not for high-pressure circuits. As the output is 4-20 mA, plan for the appropriate acquisition module to use the data on the onboard network.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Submersible pressure transducer 0-5 PSI - 4-20 mA

389,39€

389,39€ ~~450,00€~~

Frequently Asked Questions

Need help? Contact us

Does this transducer require any special maintenance?

Submersible pressure transducers are generally designed to be robust and require minimal maintenance. It is recommended to periodically check the integrity of the cable and connections, and to ensure that the measurement area is free of obstructions or accumulations that could affect accuracy.

Can the transducer be used to measure liquid level in a tank?

Yes, by measuring hydrostatic pressure at the bottom of a tank, this pressure transducer can be used to determine the liquid level. The measured pressure is directly proportional to the height of the liquid column above the sensor (accounting for the fluid's density).

Are there specific considerations for wiring 4-20 mA signals?

For wiring a 4-20 mA transducer, it is important to use high-quality shielded cable to minimize electromagnetic interference, especially in a marine environment. The cable length must not exceed the recommendations of the monitoring module or control system to which it is connected, to ensure signal integrity.

Which monitoring module types is the transducer compatible with?

The Raymarine PTS-0-5PSI-02 transducer, with its 4-20 mA output, is compatible with any current loop monitoring module or analog input controller capable of accepting a 4-20 mA signal. These modules are often used to convert the analog signal into digital data for integration into ship management systems.