Commande pilote Tiller Follow-On (Standby - Power Steer - Standby)

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 19%

Raymarine

A80532

Raymarine Tiller Follow-On autopilot control (Standby - Power Steer - Standby)

The Raymarine Tiller Follow-On A80532 autopilot control unit provides direct and intuitive operation for tillerpilot systems. It enables precise navigation with standby and steering assist modes. This control head integrates with navigation networks for responsive heading control and is supplied with A4 stainless steel mounting screws.

Retail priceBenefit from the professional rate

773,02€

773,02€ ~~950,00€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Operating voltage	12 V
Product width	121.0 mm
Product height	43.0 mm
Product depth	64.5 mm
Bus compatibility	SeaTalkng, NMEA 2000
Wired network	SeaTalkng, NMEA 2000
Mounting type	Surface-mount installation
Drive unit type	Tiller autopilot
Mounting hardware included	Yes
Integrated rudder angle sensor	No
Steering modes	Standby, Powered steering
Disengageable	No

Detailed description

Designed for direct and intuitive control, the Raymarine A80532 Tiller Follow-On autopilot control (Standby - Power Steer - Standby) is a dedicated interface for autopilot systems. It enables precise navigation and easy heading management through its three operating modes: standby, power steer, and standby. This unit is particularly suited for tiller-steered vessels requiring direct interaction with the autopilot system.

Physical specifications and installation

The Raymarine A80532 control unit features compact dimensions, with a total length of 121.0 mm and a mounting length of 119.2 mm. Its depth is 64.5 mm and height 43.0 mm. Cable clearance from the mounting plane is 6.9 mm. Installation is simplified with four #4 Pozidriv stainless steel self-tapping screws (2.9 mm) 1/2" (13 mm) long, A4 grade (DIN 7981C Z), included for secure mounting.

Flexibility and customization

A key advantage of the Raymarine A80532 control unit is the ability to replace the original handle with a user-supplied custom handle. The handle attachment requires an M4 thread with a maximum depth of 5.50 mm, providing adaptability for various navigation styles or ergonomic preferences. A suggested 6.5 mm handle arm is provided for reference.

Documentation

Type	Nom
	EN - Plan technique - Commande pilote Tiller Follow-On (Standby - Power Steer - Standby)

Expert opinion

« Direct and responsive control for tiller autopilot »

The Raymarine Tiller Follow-On A80532 autopilot control represents a relevant solution for tiller-steered sailboat helmsmen who prioritize direct and responsive control of their autopilot. Rather than a simple on/off interface, this control head provides proportional assisted steering, allowing fine course adjustments with the feel of a manual tiller. This is particularly advantageous during delicate maneuvers, harbor approaches, or navigation in changing conditions where responsiveness is critical.

In terms of installation, this type of control requires integration with an existing autopilot computer. Its mounting with A4 stainless steel self-tapping screws ensures secure attachment in a marine environment. It is essential to allocate an accessible location near the tiller, while providing adequate protection against direct spray, although the hardware is designed for marine conditions. The ability to replace the handle is a plus for ergonomics, allowing the interface to be adapted to each helmsman's preferences. This product is aimed at those seeking to enhance their piloting experience by offering more tactile and immediate control than classic digital interfaces.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Raymarine Tiller Follow-On autopilot control (Standby - Power Steer - Standby)

773,02€

773,02€ ~~950,00€~~

Frequently Asked Questions

Need help? Contact us

What is the Raymarine A80532 Tiller Follow-On autopilot command?

The Raymarine A80532 Tiller Follow-On (Standby - Power Steer - Standby) pilot control interface is a direct and intuitive control unit. It is designed for Raymarine autopilot systems and enables precise heading control via its three operating modes. This device is particularly suitable for tiller-steered boats requiring direct interaction with the autopilot system.

What are the operating modes of the A80532 autopilot control?

The A80532 autopilot order offers three main operating modes:

Standby: The autopilot is disabled, allowing manual helm control.Power Steer: Enables manual helm control with autopilot assistance, providing smoother and more responsive steering.Standby: The autopilot is disabled, allowing manual helm control.These modes facilitate direct and precise interaction with the steering system.

What type of boat is the Tiller Follow-On A80532 order intended for?

This order is specifically designed for tiller-steered boats. It is ideal for sailors who want direct and precise interaction with their autopilot system.

Is order A80532 a complete autopilot?

No, order A80532 is not a complete autopilot system. It is a control interface, or a control panel, that connects to an existing Raymarine autopilot system to enable control and heading management.

What is the primary function of the 'Power Steer' mode?

The 'Power Steer' mode (power-assisted steering) allows the user to steer the boat manually while benefiting from autopilot assistance. This provides more responsive and less tiring steering, particularly useful for manoeuvres or precise course adjustments.

What are the physical dimensions of the Raymarine A80532 order?

The Raymarine A80532 order has the following dimensions:

Total length: 121.0 mmMounting length: 119.2 mmDepth: 64.5 mmHeight: 43.0 mmCable clearance from mounting plane: 6.9 mm

Which mounting accessories are included with order A80532?

To facilitate installation, order A80532 ships with four stainless steel A4 (DIN 7981C Z) Pozidriv No. 4 self-tapping screws (2.9 mm) with 1/2" (13 mm) pan heads. These screws are designed for a secure fit.

Can I replace the original handle of the A80532 control unit with a custom handle?

Yes, the Raymarine A80532 order offers the flexibility to replace the original handle with a user-customised handle. This option allows you to adapt the device to your ergonomic preferences or your sailing style.

What are the threading requirements for a custom handle on order A80532?

If you want to use a custom handle, the mounting requires an M4 thread with a maximum depth of 5.50 mm. A handle arm of 6.5 mm is suggested as a reference.

Are specific tools required for installing the A80532 autopilot command unit?

For the installation of order A80532, you will need a Pozidriv screwdriver suitable for size #4 screws (2.9 mm) provided. Drilling tools may also be required to prepare the mounting surface according to the specified dimensions.

Which autopilot systems is the Raymarine A80532 control unit compatible with?

The Raymarine A80532 order is designed to be compatible with Raymarine Evolution series autopilot systems. It integrates into the SeaTalkng network to communicate with other system components.

Is order A80532 compatible with older Raymarine autopilots?

Order A80532 is primarily designed for Raymarine Evolution autopilot systems. Compatibility with older Raymarine systems is not guaranteed and depends on the connectivity specifications of those systems.

What type of network connection is used by the A80532 command?

Order A80532 connects to the autopilot system via Raymarine’s SeaTalkng network. This network is based on the NMEA 2000 standard, ensuring reliable and standardized communication with other compatible devices.

Can order A80532 be used with autopilots from other brands?

No, the Raymarine A80532 unit is specifically designed to work with Raymarine autopilot systems, particularly the Evolution range. It is not compatible with autopilots from other manufacturers.

Is an additional component required to connect the A80532 control unit to the autopilot?

Yes, order A80532 requires connection to an existing SeaTalkng network. If your autopilot system does not already have a SeaTalkng network, a SeaTalkng starter kit (typically including a T-connector, cable, and terminator) may be required for integration.

Does the Raymarine A80532 autopilot order come with a warranty?

Yes, the Raymarine A80532 autopilot order is covered by the manufacturer's standard warranty. This warranty is designed to cover manufacturing defects and material defects under normal product use conditions.

What does the warranty cover for order A80532?

The manufacturer’s warranty for order A80532 covers manufacturing defects and material-related issues. It guarantees that the product functions in accordance with its specifications at the time of purchase and under normal use.

How can I ensure my warranty remains valid for order A80532?

For your A80532 order warranty to remain valid, it is essential to follow Raymarine’s installation and usage instructions. Any unauthorized modification, improper installation, or misuse may void the warranty.

Is order A80532 delivered assembled or as a kit?

The Raymarine A80532 autopilot order is delivered as a fully assembled and ready-to-use unit. You only need to perform the physical installation and electrical connections.