Converts resistive tank sensors to NMEA2000 - 1 channel

Raymarine TLA100-01 adapter for 1 channel to convert a resistive tank sensor into level data on NMEA 2000 network.

Retail priceBenefit from the professional rate

190,24€

190,24€ ~~235,00€~~

Shipping calculated at checkout.

Out of stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

NMEA 2000 Load Equivalency Number (LEN)	1
Operating voltage	12 V DC
Operating temperature	-25°C to +55°C
Max power consumption	0.8
Typical power consumption	0.6
Recommended fuse rating	Protection via NMEA 2000 network
Product width	99.06 mm
Product height	25.4 mm
Product depth	1.2 in
IP rating	IP67
Bus compatibility	NMEA 2000
Wired network	NMEA 2000
Mounting type	Surface-mount installation
Certifications	NMEA 2000, IEC 60945
Types de fluides supportés	Fuel, fresh water, black water, oil, gasoline, bilge water, grey water, livewell, ballast
Nombre de réservoirs supportés	1
Sensor connection type	Connection for resistive sensor
Compatibilité résistance capteur	Configurable for different resistance ranges (e.g., 0-300 Ohms, 240-33 Ohms, 10-180 Ohms)
Paramètres configurables	Fluid type, tank size, tank shape, sensor resistance range, calibration (empty/full)
Configuration method	Via an NMEA 2000 multifunction display or configuration software
Transmitted NMEA 2000 PGNs	127505 (Fluid level)
Connector type	NMEA 2000 Micro-C (network), screw terminals (sensor)
Data output	NMEA 2000 fuel level data

Detailed description

The Raymarine TLA100-01 is a single-channel tank level adapter. It converts the signal from a resistive tank sensor into data usable on an NMEA 2000 network.

This reference is useful for modernizing an existing installation without immediately replacing the resistive tank sensor. Compatibility depends on the sensor’s resistance range and the configuration performed after installation.

Documentation

Type	Nom
	EN - Brochure technique - Convertit les capteurs de réservoir résistifs en NMEA2000 - 1 canal
	EN - Brochure technique - Convertit les capteurs de réservoir résistifs en NMEA2000 - 1 canal

Expert opinion

« Simplified integration of resistive tank sensors in NMEA 2000 »

The TLA100-01 is suitable when the boat already has a compatible resistive gauge. The critical factor is configuration: fluid type, resistance range, and tank calibration must be correctly entered to obtain a reliable reading.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security