Stabilisateur DC-DC Rebelcell OM1212100WL 12 V 9 A, boîtier à ailettes avec câble XT60 et connecteur de sortie

Stabilisateur Rebelcell 12 V 9 A modèle 2025, vue d’ensemble

Stabilisateur Rebelcell 12 V 9 A modèle 2025, vue arrière

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 5%

Rebelcell

OM1212100WL

DC stabilizer 12 V / 9 A for electronics

Name: DC stabilizer 12 V / 9 A for electronics
Brand: Rebelcell
SKU: OM1212100WL
Price: 55.02 EUR
Availability: InStock

Rebelcell 2025 stabilizer: conservative 9–15V DC input, 12V output for equipment drawing strictly less than 9A. XT60 to M8/Faston input leads, ANEN PA-45 output. 100g net, IP65 without immersion; mount on a metal plate. No exact fishfinder is validated.

Retail priceBenefit from the professional rate

55,02€

55,02€ ~~57,92€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Detailed description

The Rebelcell OM1212100WL DC-DC stabilizer, 2025 model, provides a 12 V DC output for equipment consuming strictly less than 9 A. The cautious input range is 9 to 15 V DC: the manufacturer’s datasheet shows different limits depending on the sections. Check the battery and the electrical requirements of the device before installation.

The manufacturer provides two input cables: XT60 to M8 and Faston (20 cm each), and specifies an ANEN PA-45 output with a 40 cm cable. The wiring of the powered device must be verified; no compatibility with a specific fishfinder model is stated.

The aluminum housing weighs 100 g net. The manufacturer claims IP65, but does not allow immersion. It requires screw mounting on a metal plate for heat dissipation, never directly on the battery. Observe polarity. The fuse rating is not published here, as two values contradict each other in the manufacturer’s datasheet.

Payment and security

Your payment information and data are processed securely.

DC stabilizer 12 V / 9 A for electronics

55,02€

55,02€ ~~57,92€~~

Frequently Asked Questions

Need help? Contact us

What does the Rebelcell OM1212100WL stabilizer provide?

It provides a stable 12V DC output for 12V equipment drawing strictly less than 9A. It is neither a charger nor a battery.

What battery input voltage should I use?

Use the conservative 9–15V DC input range. The manufacturer page contains conflicting voltage ranges; never connect it below 9V, and have any installation outside this range technically reviewed.

Can I connect my fishfinder directly?

No specific fishfinder model is validated here. Check its voltage, maximum current, polarity, cable and exact connector before connection. The stabilizer output uses ANEN PA-45.

Which cables are supplied?

The manufacturer lists two XT60 input leads, one to M8 ring terminals and one to Faston connectors, plus an ANEN PA-45 output connection. The input leads are specified as 20cm each and the output lead as 40cm.

Can the stabilizer be immersed?

No. The manufacturer states IP65 for the housing, but this does not permit immersion. Protect the connections during installation.

Where should the stabilizer be mounted?

Do not place it on the battery. The manufacturer instructs users to screw it to a metal plate for heat dissipation. Observe battery-side polarity.

What is the net weight?

The manufacturer states 100g for the stabilizer itself. Do not confuse this net weight with the package or the included leads.

Which fuse should be used?

The manufacturer page gives two different fuse ratings. This listing does not recommend a rating; have the protection and wiring architecture checked for the exact installation.