Simrad RS100-B marine VHF system with AIS transmit/receive

The Simrad RS100-B is a marine VHF "black box" system with an integrated Class B AIS transceiver. It is designed for maritime radio communication, safety at sea via AIS (which allows you to see and be seen by other equipped vessels), and Digital Selective Calling (DSC) functionality.

The Simrad RS100-B kit includes the following items:

The Blackbox VHF NRS-2 module with integrated Class B AIS. A GPS-500 antenna. A wired HS100 handset. An SP100 speaker.

Yes, the RS100-B system is supplied with a GPS-500 antenna that provides accurate position data for AIS Class B and Digital Selective Calling (DSC) operation.

The RS100-B integrates a Class B AIS (Automatic Identification System) transceiver. This means it can not only receive AIS signals from other vessels to display their position, heading, and speed, but also transmit your own vessel's data, thereby increasing your visibility and safety at sea.

A "Blackbox" VHF system means the main radio unit is installed out of sight, typically in a dry and protected location. All radio functions are then controlled remotely via one or more remote handsets, offering a cleaner and more flexible installation at the helm or in the cockpit.

Yes, the Simrad RS100-B system is equipped with Digital Selective Calling (DSC) Class D. This enables automatic distress calls and direct communications with other vessels or shore stations equipped with DSC.

The Simrad RS100-B system can transmit at two power levels: 25 watts for maximum range and 1 watt for short-range communications, such as in harbors or channels.

Yes, the Simrad RS100-B system holds U.S. Coast Guard approval number 165.156/57/1, confirming compliance with maritime standards.

The RS100-B offers dual and triple watch functions, allowing you to monitor channel 16 (the emergency channel) simultaneously with one or two additional working channels of your choice.

The Simrad RS100-B kit includes a wired HS100 handset that connects directly to the NRS-2 Blackbox unit.

The Simrad RS100-B is a fixed VHF system, designed to be permanently installed aboard a vessel.

No, the Simrad RS100-B kit includes the GPS-500 antenna required for AIS and ASN operation, but a separate VHF antenna is essential for radio communication and is not supplied. It must be purchased separately.

To install the RS100-B system, you will need the following connections:

A 12V DC power supply. A connection to the VHF antenna (not included). A connection to the GPS-500 antenna (included). NMEA 2000 or NMEA 0183 connections for integration with other marine electronic equipment. Connection of the HS100 handset and SP100 speaker to the Blackbox unit.

The GPS-500 antenna must be installed in a clear, unobstructed location on the boat to ensure optimal GPS signal reception and reliable AIS and ASN performance.

The HS100 wired handset connects to the Blackbox NRS-2 unit via a dedicated cable supplied with the system. This cable transmits power, data, and audio simultaneously.

Yes, the Simrad RS100-B system is fully NMEA 2000 compatible. This allows it to integrate easily into an existing marine electronics network, share data with multifunction displays (MFD) and other compatible devices.

Yes, thanks to its NMEA 2000 compatibility, the RS100-B can be connected to a compatible multifunction display (MFD). This allows AIS data to be displayed on your MFD’s chartplotter, as well as controlling certain VHF functions directly from the screen.

Yes, the Simrad RS100-B system is expandable. It can support up to 4 wired HS100 handsets and up to 4 wireless HS40/HS40-B handsets, providing flexibility to control the VHF from multiple points on the boat.

Yes, in addition to its NMEA 2000 compatibility, the Simrad RS100-B system also features NMEA 0183 interfaces, enabling integration with older marine electronic equipment that uses this protocol.