Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 24%

Simrad

20188074

LF3000 Linear Feedback

Name: LF3000 Linear Feedback
Brand: Simrad
SKU: 20188074
Price: 303.24 EUR
Availability: InStock

The Simrad LF3000 Linear Feedback is a sealed linear position sensor designed to provide accurate rudder angle data to autopilot systems on boats equipped with outboard motors and hydraulic steering. It has a 300 mm stroke and a pre-wired 8.5-meter cable for easy integration with the Simrad LFI3000 MK2 interface (sold separately). Supplied with a pre-wired 8.5-meter cable and a dedicated mounting bracket with clamps.

Retail priceBenefit from the professional rate

303,24€

303,24€ ~~399,00€~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Operating voltage	12 V (via the LFI3000 Mk2 interface and the NMEA 2000 bus)
Typical power consumption	0.9 W
IP rating	IPX7 or higher
Mounting type	Mounting on hydraulic ram
Sensor type	Linear potentiometer
Sensor compatibility	Simrad LFI3000 Mk2 Interface
Cable length	8.5
Sensor output type	Analog
Connector type	Bare wires (for LFI3000 Mk2 terminal block)
Cable type	Shielded multicore cable
Environmental Resistance	Saltwater
Intended Application	Outboard steering systems with hydraulic ram
Material	Marine composite materials
Plage d'humidité de fonctionnement	Up to 95% condensation-free
Plage de mesure	300 mm
Product Function	Linear position sensor for rudder angle
Storage temperature range	-30 to +70
Type de capteur	Tiller angle
Usage pilote	Cap
Weight	1.297

Detailed description

Designed for boats equipped with outboard motors and hydraulic steering rams, the Simrad LF3000 Linear Feedback is a sealed linear position sensor. It provides accurate rudder angle data to autopilot systems, improving heading hold accuracy and navigation.

Technical Specifications and Integration

The LF3000 Linear Feedback offers a 300 mm (11.8 in) stroke and comes with a pre-wired 8.5 m (28 ft) cable. This cable length allows direct connection to the Simrad LFI3000 MK2 interface, which is required for integration with Simrad autopilot computers. Its weight is 1.297 kg.

Robust Design and Installation

With a fully sealed construction, meeting or exceeding IPX7 standards, the Simrad LF3000 Linear Feedback is designed to withstand marine environments. It includes a dedicated mounting bracket and clamps that allow direct attachment to the existing outboard motor ram, requiring no major modifications to the steering system. This design simplifies installation and ensures reliable operation even in harsh weather conditions.

Payment and security

Your payment information and data are processed securely.

LF3000 Linear Feedback

303,24€

303,24€ ~~399,00€~~

Frequently Asked Questions

Need help? Contact us

What is the Simrad LF3000 Linear Feedback?

This is a sealed linear position sensor designed to provide accurate rudder angle data to autopilot systems. It is particularly suited to vessels equipped with outboard motors and hydraulic steering rams.

What is the LF3000 Linear Feedback sensor used for?

The LF3000 Linear Feedback sensor is used to improve heading-keeping accuracy and navigation by providing reliable rudder position data (helm angle) to your Simrad autopilot system.

What is the useful travel of the Simrad LF3000 Linear Feedback?

The Simrad LF3000 Linear Feedback provides a 300 mm stroke, which is approximately 11.8 inches.

Is the LF3000 Linear Feedback waterproof?

Yes, the Simrad LF3000 Linear Feedback has fully waterproof construction, meeting or exceeding IPX7 standards, making it resistant to marine environments.

What is the length of the cable supplied with the LF3000 Linear Feedback?

The transducer is supplied with a pre-wired cable 8.5 m (about 28 ft) long.

What is the weight of the Simrad LF3000 Linear Feedback?

The weight of the Simrad LF3000 Linear Feedback is 1.297 kg.

How does the LF3000 Linear Feedback improve autopilot performance?

By providing accurate and real-time data on the rudder angle, the sensor enables the autopilot to react more quickly and with greater precision to course changes, thereby improving course-keeping and fuel consumption.

Which types of boats are compatible with the LF3000 Linear Feedback?

The LF3000 Linear Feedback is designed specifically for vessels equipped with outboard motors and hydraulic steering rams.

Is the Simrad LFI3000 MK2 included with the LF3000 Linear Feedback?

No, the Simrad LFI3000 MK2 interface is not included and must be purchased separately. It is required for integrating the sensor with Simrad autopilot computers.

Is the LF3000 Linear Feedback compatible with autopilot systems from other brands?

The LF3000 Linear Feedback is designed to integrate with Simrad autopilot computers via the LFI3000 MK2 interface. Compatibility with other brands is not guaranteed.

How does the LF3000 Linear Feedback connect to the autopilot system?

The sensor connects directly to the Simrad LFI3000 MK2 interface, which in turn connects to the Simrad autopilot computer.

Can the LF3000 Linear Feedback be used with mechanical steering systems?

No, the Simrad LF3000 Linear Feedback is specifically designed for use with hydraulic steering cylinders on outboard motors.

Is the LF3000 Linear Feedback suitable for all types of hydraulic steering cylinders?

The sensor is designed for direct mounting on the existing outboard motor cylinder. While it is compatible with most standard hydraulic cylinders, it is always recommended to verify specific compatibility with your cylinder model before purchase.

Where should the Simrad LF3000 Linear Feedback be mounted?

It is designed to be mounted directly on the existing outboard motor ram.

Does the existing steering system need to be modified to install the LF3000 Linear Feedback?

No, the Simrad LF3000 Linear Feedback is designed for direct mounting on the existing outboard motor steering ram, without requiring major modifications to the steering system.

Which mounting accessories are included with the LF3000 Linear Feedback?

The sensor comes with a mounting bracket and dedicated clamps for easy and secure installation.

Is the installation of the LF3000 Linear Feedback complex?

Its design is intended to simplify installation. It attaches directly to the existing outboard motor steering cylinder using the provided accessories, without major modifications to the steering system.

How is the LF3000 Linear Feedback powered?

The LF3000 Linear Feedback sensor is designed to be connected to the Simrad LFI3000 MK2 interface. Power is typically supplied via this interface by the autopilot system.

Does the Simrad LF3000 Linear Feedback come with a warranty?

Yes, the Simrad LF3000 Linear Feedback is covered by the manufacturer's standard warranty. This warranty provides protection against manufacturing defects and material faults.