Commande joystick double 12/24V S-Link — Sleipner PJC212

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 5%

Sleipner

PR753

Double 12/24V S-Link joystick control

The Sleipner S-Link PJC212 double joystick control offers precise control of bow and stern thrusters on 12V/24V DC systems. Featuring an LCD screen for real-time feedback and a "Hold" function for harbour manoeuvres, it interfaces via the S-Link CAN-bus network. Designed for PRO thrusters, it ensures optimized maneuverability. The PJC212 can display information for hydraulic systems (e.g., stabilizers), but does not control hydraulic thrusters, for which the PJC222 model is required.

Retail priceBenefit from the professional rate

677,04€

677,04€ ~~714,25€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Joystick Configuration	Dual joystick
Material	UV-resistant plastic
Operating voltage	12/24V DC

Detailed description

Designed for precise navigation, the Sleipner S-Link double joystick control (reference PJC212) is a control interface for marine thrusters. Compatible with 12V and 24V DC systems, it integrates via the S-Link™ network (based on CAN-bus) for intelligent communication between all connected units. This control panel is particularly suited for Sleipner variable-speed PRO thrusters. Model PJC212 is designed for PRO DC thrusters. For hydraulic systems, model PJC222 is required.

Simplified manoeuvres and intuitive control

The Sleipner PJC212 panel features a double joystick control for precise operation of bow and stern thrusters. The "Hold" function allows the boat to be held alongside a dock with a single press, simplifying manoeuvres for a single person. A backlit LCD screen provides real-time information, such as thrust intensity and direction, remaining operating time, battery status, and temperature. When a hydraulic system (e.g., stabilizers) is connected alongside DC thrusters controlled by the PJC212, the screen also displays oil temperature and pressure.

System integration and safety

With multilingual interactive menus and a setup assistant, installation and use of the control panel are simplified. The S-Link system ensures plug-and-play wiring with compact, round, watertight connectors featuring a keyed design to prevent incorrect connections. Integrated diagnostic functions via the panel interface enable efficient troubleshooting. For safety, built-in audible alarms and a connection for an external alarm are included, complemented by safety features such as automatic shutdown in case of thruster inactivity and an emergency stop mechanism integrated into the system. The panel is built for installation in wet environments and has approximate dimensions of 141 mm in height and 83 mm in width.

Documentation

Type	Nom
	Documentation Sleipner — Commande joystick double 12/24V S-Link

Expert opinion

« Technical analysis of the Sleipner S-Link dual joystick control »

The Sleipner S-Link double joystick control is an essential interface for anyone looking to optimize the maneuverability of their vessel. Its primary value lies in the precision and simplicity it brings to harbour manoeuvres. The "Hold" function is a major asset, allowing the boat to be held at the dock without constant effort on the joysticks, which is particularly valuable during single-handed or short-handed manoeuvres. The compact LCD display provides crucial real-time feedback on the state of the thrusters and the electrical system, a definite advantage for quick diagnostics.

In terms of installation, Sleipner’s S-Link architecture (CAN-bus) greatly simplifies wiring. The plug-and-play connectors minimize the risk of wiring errors, making integration into an existing system more straightforward. This control is specifically designed for Sleipner PRO variable-speed thrusters, enabling full utilization of power modulation capabilities, reducing noise and energy consumption compared to on/off systems. For hydraulic installations, ensure the correct reference PJC222 is used where applicable, as compatibility is targeted.

While this control is robust and designed for the marine environment, it is critical to verify compatibility with the entire S-Link network and the type of thruster installed to ensure optimal performance and avoid malfunctions. It represents a relevant investment for boaters seeking precise control and reliable system integration.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Double 12/24V S-Link joystick control

677,04€

677,04€ ~~714,25€~~

Frequently Asked Questions

Need help? Contact us

What is the purpose of the Sleipner PJC212 dual joystick control?

The Sleipner PJC212 dual joystick control panel is designed to operate your bow and stern thrusters. It enables precise and intuitive maneuvering of your boat, particularly during docking operations or in tight spaces.

What is the required supply voltage for this joystick control unit?

This Sleipner PJC212 dual-joystick control is versatile and operates with 12V and 24V onboard electric systems, making it compatible with a wide range of marine installations.

What are the main features of this dual joystick control command?

This double joystick control offers several key features to simplify your boat’s manoeuvring:

Double joystick: Enables independent or combined control of bow and stern thrusters.Hold function: Maintains the boat’s position in a stable manner.LCD screen: Displays important system information.S-Link compatibility: Ensures easy and reliable integration with other Sleipner components.

How is the Sleipner PJC212 dual joystick control installed on the dashboard?

The joystick control is designed for flush-mount installation in a panel or dashboard. It requires cutting for integration and connects to your boat's S-Link network. It is recommended to follow the official manual instructions for correct installation.

Can I control both my bow thruster and stern thruster with this joystick?

Yes, absolutely. Thanks to its dual-joystick design, this unit is specifically engineered for simultaneous or independent control of a bow thruster and a stern thruster. This provides optimal maneuverability for your vessel.

What is Sleipner's S-Link system?

Sleipner’s S-Link system is an intelligent, plug-and-play CAN-bus communication protocol. It enables easy connection and reliable communication between all Sleipner-compatible components, such as thrusters, control panels, and interfaces, simplifying installation and use.