SurLok Plus Cable 95 mm², 2 m, 90° angled orange-black – MG5001131

This is a pre-assembled DC power cable from MG Energy Systems, specifically designed for DC power connections. It features SurLok Plus angled connectors at each end, one orange and one black.

This cable has the following specifications:

Cable cross-section: 95 mm²Cable length: 2 metersConnectors: SurLok Plus angled (one end orange, the other black)

The exact length of this cable is 2 meters.

The cross-section of this cable is 95 mm².

This cable is fitted with SurLok Plus angled connectors. One end is orange and the other is black.

Yes, this cable is supplied pre-assembled with the SurLok Plus angled connectors already installed at each end.

The connectors are two different colors: one end is orange and the other is black.

The declared shipping weight of this cable is 2 kg.

This cable is intended for integrators who create DC power connections with the SurLok Plus angled connectors in MG Energy systems.

Yes, reference MG5001131 is a standard item in the MG Energy Systems catalog, part of the cable and connector family.

This cable is compatible with systems using the SurLok Plus angled connector interface. It is designed for power connections within MG Energy installations.

No, this cable is specifically fitted with angled SurLok Plus connectors. For optimal compatibility and secure installation, it must be used with equipment featuring matching angled SurLok Plus connector interfaces.

70 mm² and 95 mm² variants are not interchangeable without recalculating and fully validating the system. It is mandatory to verify the cross-section, ampacity, length, mechanical coding, and bend radius with the entire system before any replacement.

To ensure compatibility, verify the following with your system:

Cable cross-section (95 mm²)Required current ratingLength (2 m)Mechanical coding of connectors (SurLok Plus angled orange and black)Minimum bend radiusA sizing study is recommended.

The cable itself is a power conductor. Its voltage compatibility will depend on the SurLok Plus connectors and the cable insulation, typically suited for high-power DC applications from MG Energy. However, it is critical to ensure that the 95 mm² cross-section and 2 m length are appropriate for the ampacity and voltage drop of your specific system.

This cable must be installed by a qualified professional with the power off, especially for high-power DC connections, to ensure safety and compliance.

No, it is strongly discouraged to shorten, lengthen, or modify the pre-assembled terminations of this cable without following a procedure validated by the manufacturer. This could compromise the integrity and safety of the connection.

During installation, it is essential to:

Check that connectors are correctly locked.Ensure proper cable routing.Provide adequate mechanical protection.Ensure no excessive stress or strain is applied to connectors.Perform installation with power off.

For a complete installation, you will need to provide separately items such as:

BatteriesFuses and fuse holdersMounting bracketsPersonal protective equipment (PPE)A full sizing study of your system.

After connecting the plugs, it is important to visually and physically check that they are locked in place. SurLok Plus connectors are designed to provide tactile and/or visual feedback indicating a secure connection. Ensure they are fully engaged and there is no play.