EasyPlus C 12/1600/70-16
Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.
Available in stock
Technical specifications
Technical specifications
| Battery temperature sensor included | Oui |
| IP rating | IP 21 |
| Wired input | AC (G-ST18i), PV (MC4) |
| Wired network | VE.Direct |
| AC input voltage range | 187-265 |
| Dimensions (W x H x D) | 214 x 745 x 110 |
| Supported battery chemistries | Lead-acid (GEL, AGM, flooded lead), Lithium (LiFePO4) |
| Bulk/absorption charge voltage | 14.4 |
| Charge algorithm | Multi-step adaptive |
| Charge phases | Bulk, Absorption, Float, Storage |
| Cooling method | Fan-assisted cooling |
| Max efficiency | 92.0 |
| Float voltage | 13.8 |
| Maximum AC input current | 16.0 |
| Max charge current (A) | 70.0 |
| Mobile app compatibility | Oui |
| Mounting type | Wall mounting |
| Nominal voltage | 12.0 |
| Operating temperature range | -20 to +50 |
| Output voltage | 230.0 |
| AC input frequency range | 45-65 |
| AC transfer time | 20 |
| Battery Temperature Compensation Rate | -16 |
| Charger Power Factor | 1 |
| Charger Starter Battery Charge Current A | 4 |
| Continuous power at 25°C | 1300.0 |
| Continuous output power (40°C) | 1200.0 |
| Continuous Power Va | 1600 |
| Input voltage range | 9.5-17 |
| No-load power consumption | 8 |
| Inverter waveform | Pure sine wave |
| Marine-ready | Oui |
| Mppt Model | MPPT 100/50 |
| Nominal input voltage | 12.0 |
| Nominal output voltage | 230.0 |
| Output frequency | 50 (adjustable to 60) |
| Overload protection | Oui |
| Peak power | 3000.0 |
| Programmable Relay Count | 1 |
| Remote on/off support | Oui |
| Short-circuit protection | Oui |
| Storage voltage | 13.2 |
| Weight | 15.0 |
| Wired output | 4 DC outputs (2x 10A, 2x 16A) |
Detailed description
Detailed description
The Victron Energy EasyPlus C 12/1600/70-16 is an integrated energy system designed for standalone or grid-connected installations. It combines an MPPT solar charge controller, a MultiPlus Compact inverter/charger, and an AC distribution panel in a single housing. This all-in-one design aims to simplify installation and reduce required wiring, providing a compact and efficient solution for onboard energy management. Unlike modular systems composed of separate components (for example, a separate MultiPlus, SmartSolar MPPT, and AC panel), the EasyPlus reduces installation time and complexity by integrating these key functions.
MultiPlus Compact Inverter/Charger
The unit integrates a pure sine wave inverter of 1600 VA (1300 W continuous at 25°C) with a peak power capacity of 3000 W. It delivers an output voltage of 230 VAC ± 2% at a frequency of 50 Hz ± 0.1%. Its maximum efficiency reaches 92%, with a standby consumption of 8 W. The PowerAssist® function allows supplementing a limited AC source (grid or generator) with inverter power to prevent overloads, while the PowerControl function enables setting a maximum AC input current. AC power transfer is uninterrupted, activating in less than 20 milliseconds in case of grid failure or disconnection of the external source.
The adaptive 4-stage battery charger (bulk, absorption, float, storage) ensures optimal charging for various battery types, with a charging current of 70 A for the service battery and 4 A for the starter battery. Charging voltages are 14.4 V in absorption, 13.8 V in float, and 13.2 V in storage mode. A battery temperature sensor is included to optimize charging.
MPPT 100/50 Solar Charge Controller
The integrated MPPT 100/50 solar charge controller can manage up to 700 W of PV power for a 12 V system, with a maximum open-circuit voltage of 100 V and a maximum output current of 50 A. It offers conversion efficiency up to 98% and uses an ultra-fast MPPT algorithm to maximize energy harvesting, even under partial shading conditions. Three sets of MC4 (PV-ST01) PV connectors are available for connecting solar panels.
AC Distribution and Physical Integration
The AC distribution is protected by a residual current device (RCD 30 mA/16 A) and includes four AC outputs: two protected by 10 A circuit breakers and two by 16 A circuit breakers. One 16 A output is controlled by the AC input, activating only when AC power is present. The unit is housed in a blue aluminum enclosure (RAL 5012) with IP21 protection. The unit measures 745 x 214 x 110 mm and weighs 15 kg. 1.5-meter battery cables and a G-ST18i connector for the AC input are provided, simplifying connections.
Your payment information and data are processed securely.
