Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Victron Energy

REC040010210R

Inverter Control VE.Direct

Designed for managing Victron Energy inverters, this control module uses the VE.Direct interface. It enables direct communication with the inverter for monitoring and configuration.

Retail priceBenefit from the professional rate

22,00€

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Mounting type	Surface mount
Wired network	VE.Direct
Intégration écosystème de marque	Victron Energy
Modèles de convertisseurs compatibles	Victron Energy inverters compatible with VE.Direct
Control Compatibility	Victron Energy inverters
Control Interface Type Compatibility	VE.Direct
Compatible appareil GX	Yes
Consommation électrique	Very low
Victron Vrm Compatibility	Yes (via GX device)
Vrm Portal Compatibility	Yes (via GX device)

Detailed description

The Inverter Control VE.Direct module from Victron Energy is designed for managing and controlling inverters compatible with the VE.Direct interface. This module enables direct communication with Victron inverters, allowing access to operational data and parameters. It integrates into Victron Energy systems to provide a dedicated control interface.

Expert opinion

« VE.Direct control module for Victron inverters »

The VE.Direct Inverter Control module is a key component for integrating and monitoring Victron Energy inverters within a coherent energy system. Its main value lies in its ability to establish direct and reliable communication via the VE.Direct protocol, Victron’s standard. This type of module is essential for installations requiring precise control or detailed monitoring of power converters. It enables interfacing the inverter with other Victron equipment such as battery controllers or control panels, thereby consolidating energy management. Its utility is clear for users seeking an overview and the ability to adjust inverter system parameters without excessive installation complexity.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Inverter Control VE.Direct

22,00€

Frequently Asked Questions

Need help? Contact us

Which Victron Energy devices is this cable compatible with?

This cable is compatible with all Victron Energy inverters, charger-inverters, and other devices equipped with a VE.Direct communication port that supports remote on/off control via this port. It is recommended to consult your Victron device manual to confirm compatibility.

Is this cable compatible with inverters from brands other than Victron Energy?

No, the VE.Direct communication protocol is a proprietary interface from Victron Energy. This cable is not compatible with inverters or other devices from other brands.

Does the Victron device require a specific VE.Direct port to use this cable?

Yes, the Victron device must have a VE.Direct communication port to connect this cable. Without this port, the cable cannot be used for remote control.

Can multiple Victron devices be connected with a single Inverter Control VE.Direct cable?

No, a single Inverter Control VE.Direct cable is designed to control only one Victron device at a time. If you need to control multiple devices, you will require one cable per device or a Victron centralized management solution (such as a Color Control GX or Cerbo GX) with the appropriate interfaces.

Is it compatible with Victron battery management systems (BMS)?

This cable can be used to control a Victron device (such as an inverter) that is itself integrated into a system with a Victron BMS, provided the Victron device has a VE.Direct port and supports remote on/off control. The cable does not connect directly to the BMS to control it.

What type of external switch should be used with this cable?

You can use a toggle switch, pushbutton, or any other dry-contact switch suitable for your application. The switch simply needs to open or close the circuit to send the on/off signal to the Victron device. Ensure the switch is suitable for the installation environment.

Are specific tools required for installing this cable and switch?

For cable installation, basic tools such as a screwdriver (for the switch terminals) and possibly a wire stripper or crimping tool (if using terminals) may be required. No specialized tools are needed for connecting the cable to the Victron device.

Is an installation manual or wiring diagram provided with the cable?

Yes, a small manual or datasheet is usually supplied with the cable, including a simple wiring diagram for connecting the external switch. Detailed information is also available on the Victron Energy website.

What is the warranty applicable to the Inverter Control VE.Direct cable?

The Victron Energy VE.Direct Inverter Control cable is covered by Victron Energy’s standard warranty, which covers manufacturing and material defects. For specific warranty details, it is recommended to consult Victron Energy’s general terms and conditions or contact customer service.