Système de cale automatique Bilge IC - 24 V Whale – référence SI8484

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

En cours de réapprovisionnementSave 8%

Whale

SI8484

Whale Bilge IC 24 V Automatic Bilge Pump System

The Bilge IC 24 V Whale (SI8484) automatic bilge system is a pre-wired integrated solution for standalone electric bilge drainage. It combines a self-priming Gulper IC pump and an intelligent Strainer IC strainer, enabling automatic water detection and evacuation. This system is suitable as a primary bilge pump for boats up to 12 meters or as a secondary pump for any recreational vessel, with a standby power consumption of 0.01 A.

Includes a Gulper IC pump, a Strainer IC strainer, three #8 self-tapping screws with washers, and an inline fuse holder.

Retail priceBenefit from the professional rate

553,96€

553,96€ ~~603,77€~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Application Vessel Type	Pleasure craft
Auto Operating Voltage Range 24v	21.6 V DC to 27.2 V DC
Type de contrôle	Integrated smart control
Fuse rating	5 Amperes Automotive
Material	Pump head: Glass-reinforced nylon; Valves and diaphragm: Santoprene®; Pump body: Aluminum; Gear: Delrin®; Fasteners: Stainless steel
Minimum Wire Size	1.5mm² (16 AWG)
Mounting Location	Remote installation
Operating voltage	24 V DC
Pump Type	Bilge diaphragm pump
Weight	2.6

Detailed description

Designed for autonomous bilge management on board, the Whale Bilge IC 24 V automatic bilge pump system (part number SI8484) is an integrated solution combining four components into a single pre-wired assembly. It integrates a high-flow Gulper IC pump and an intelligent-control Strainer IC strainer, providing efficient bilge water monitoring and discharge. This system is suitable as a primary bilge pump for boats up to 12 meters (39.4 feet) according to ISO15083, or as a secondary pump on any recreational vessel.

Intelligent Control Technology

At the core of the Bilge IC system is intelligent control technology that enables the Strainer IC strainer to communicate directly with the Gulper IC pump. This interaction ensures automatic pump activation and shutdown upon water detection in the bilge. The Gulper IC pump is self-priming and can run dry without damage, ensuring operational reliability. Features such as soft-start reduce pump wear, while activation/deactivation delays prevent short cycling, and a timed delay optimizes drainage. The system also includes anti-clogging valves, eliminating the need for external strainers.

Installation and Performance

The Whale Bilge IC 24 V system is designed for remote installation, allowing the Gulper IC pump to be positioned up to 4 meters (13 feet) from the bilge area for easier inspection and protection from damp environments. Pre-wired IP68-rated waterproof electrical connections simplify installation and prevent electrolysis and capillary action issues. Nominal power supply is 24 V DC, with an operating voltage range of 21.6 V DC to 27.2 V DC. Standby current draw is 0.01 A, and maximum operating current is 3.25 A to 4 A. A 5 A automotive fuse is recommended. The power cable is 4 meters (12 feet) long and requires a minimum wire gauge of 1.5 mm² (16 AWG).

The system provides a maximum suction lift of 3 meters (10 feet) and a maximum discharge head of 3 meters (10 feet), with a combined maximum of 4 meters (13.5 feet). The Gulper IC pump accepts 19 mm (¾") or 25 mm (1") corrugated hose connections, while the Strainer IC strainer uses a 19 mm (¾") port with adjustable orientation (horizontal, vertical, lateral). System weight is 2.6 kg (5.7 lbs). Flow rates vary by installation conditions: for example, with 0 m suction lift, 1 m discharge head, and a 19 mm hose, the 24 V model delivers 17.5 liters/minute (1038 liters/hour). Materials include a glass-reinforced nylon pump head, Santoprene® valves and diaphragm, aluminum pump body, Delrin® impeller, and stainless steel fasteners.

Documentation

Type	Nom
	EN+FR - Installation Guide - Whale Bilge IC - SI8284,

Expert opinion

« Whale Bilge IC 24V: Intelligence for bilge pumping »

The Whale Bilge IC 24 V automatic bilge system represents a significant advance in autonomous water management aboard. Its practical value lies in its ability to simplify a critical function: bilge pumping. By integrating the Gulper IC pump and the Strainer IC strainer with their intelligent control, Whale offers an "all-in-one" solution that reduces installation complexity and potential failure points associated with separate components. This synergy between sensor and pump ensures reactive detection and evacuation of water, essential for vessel safety.

From an installation standpoint, the remote-mount design of the Gulper IC pump is a major asset. It allows positioning the pump in a dry, easily accessible location, away from turbulence and impurities at the bilge bottom. The pre-wired system with IP68 waterproof connectors minimizes wiring error risks and protects against electrolysis and capillary action, common causes of failures in marine environments. The adjustable orientation of the Strainer IC port also facilitates integration in confined spaces. It is important to note that this system is designed for bilge water only and not for flammable liquids, and that correct installation above the waterline or with a broken siphon is mandatory. The mounting surface for screws must have a minimum thickness of 19 mm (¾").

The differentiation of this system lies in its embedded intelligence and filterless design, thanks to its anti-clogging valves. This significantly reduces maintenance compared to traditional bilge pumps that require regular filter cleaning. The "soft start" function also contributes to pump longevity, while its ability to run dry without damage provides additional peace of mind. This system is particularly relevant for pleasure craft up to 12 meters as a primary bilge solution, or as a reliable complement on larger vessels where autonomous management is valued.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Whale Bilge IC 24 V Automatic Bilge Pump System

553,96€

553,96€ ~~603,77€~~

Frequently Asked Questions

Need help? Contact us

Is the Bilge IC SI8484 system a submersible bilge pump or a remotely mounted one?

The Bilge IC SI8484 system is a remote-mounted bilge kit. It is not designed to be directly submerged in the bilge but rather installed at a distance.

Is the Whale SI8484 system a main product or an accessory?

The Whale Bilge IC SI8484 automatic bilge pump system is designated as a flagship product in the Bilge IC range.

For which type of sailboat is the Whale SI8484 automatic bilge pump system suitable?

This system is suitable as a main bilge pump for boats up to 12 meters (39.4 feet) in length.

What does the abbreviation "IC" stand for in the Bilge IC product name?

The abbreviation « IC » stands for « Intelligent Control ». This indicates that the system integrates advanced control electronics to optimize its operation.

What is the primary function of Whale's Bilge IC SI8484 automatic bilge system?

The Whale Bilge IC SI8484 automatic bilge system is designed for electric bilge drainage on vessels. It is a high-capacity bilge pump with intelligent control electronics.

What is the required supply voltage for the Whale SI8484 automatic bilge system?

The Whale SI8484 automatic bilge pump system requires a 24 V DC (direct current) power supply to operate.

What is the Whale Bilge IC automatic bilge system - 24 V?

The Whale Bilge IC automatic bilge system (part number SI8484) is a high-capacity bilge pump with integrated intelligent electronic control components. It is designed for installation in recreational vessels as a remote-mount bilge pump, providing fully automatic operation. This system is suitable as a primary bilge pump for boats up to 12 meters (39.4 feet) in accordance with ISO15083, or as a secondary bilge pump on any type of recreational vessel.

What are the main components included with the Whale Bilge IC system?

The Whale Bilge IC automatic bilge system (part number SI8484) is supplied with the following components:

1 Gulper® IC1 bilge pump 1 IC3 strainer 1 set of self-tapping screws no. 8 and washers 1 inline fuse assembly

Which materials are used in the construction of the Whale Bilge IC pump?

Whale's IC bilge pump is manufactured with robust materials to ensure durability in a marine environment:

Pump head: Glass-fiber-reinforced nylonValves and diaphragm: Santoprene®Pump body: AluminumImpeller: Delrin®Fasteners: Stainless steel

What is the standby current consumption of the Whale Bilge IC system?

Whale’s Bilge IC automatic bilge system has a very low standby current draw of just 0.01 ampere. This minimizes the impact on the vessel’s battery when the pump is not actively running.

What is the maximum suction and discharge height for this pump?

Whale’s Bilge IC automatic bilge pump system offers a maximum vertical suction height of 3 metres (10 feet) and a maximum vertical discharge height of 3 metres (10 feet). The combined maximum suction and discharge height (with vertical vent) is 4 metres (13.5 feet).

What is the operating voltage range for the Bilge IC 24V system?

The Whale Bilge IC automatic bilge pump system (part number SI8484) is designed to operate on a 24 V d.c. power supply. Its operating voltage range is 21.6 V d.c. to 27.2 V d.c., ensuring stable performance in 24 V boat electrical systems.

What types of liquids can the Whale Bilge IC pump handle?

The Whale Bilge IC pump is specifically designed to pump only bilge water. It is not suitable for pumping flammable liquids, diesel, chemicals, or other substances. Its use is limited to recreational marine applications for bilge drying.

Which pipe sizes are compatible with Whale's Bilge IC system?

Whale’s Bilge IC system is compatible with smooth-bore reinforced hoses of 19 mm (¾") or 25 mm (1"). The fittings use serrated barbs, so no cutting of inlet or outlet ports to size is required.

What is the recommended fuse size for the Whale Bilge IC 24V system?

For the Whale Bilge IC automatic bilge pump system operating on 24 V d.c. (reference SI8484), the recommended fuse size is 5 amperes (automotive fuse). It is critical to adhere to this specification to ensure electrical safety and proper system operation.

What is the minimum wire gauge required for installing this pump?

The minimum recommended wire size for installing the Whale Bilge IC automatic bilge pump system is 1.5 mm² (equivalent to 16 AWG). It is essential to ensure the wiring complies with applicable electrical standards and includes a properly rated circuit breaker or fuse.

For which types and sizes of boats is the Bilge IC pump suitable?

The Whale IC bilge pump is designed for use in recreational vessels. It is suitable as a primary bilge pump for boats under 12 metres (39.4 feet) in length, in accordance with ISO15083. It can also be used as a secondary bilge pump on any recreational vessel, regardless of size.

Where should the Whale Bilge IC pump system be installed?

The Whale Bilge IC pump system must be installed in a dry location, protected from standing water and free of obstructions. It is recommended to choose a position that allows for the shortest possible hose lengths. The pump can be mounted on a horizontal or vertical surface. If mounted vertically, the pump head must be located below the motor body. It is also recommended that the outlet be mounted above the waterline and that anti-siphon loops be installed if necessary.

Can the Bilge IC pump head be rotated during installation?

Yes, the pump head of Whale’s Bilge IC system can be rotated to match pipe connections. To do this, loosen the screw, adjust the head to the required position while ensuring the diaphragm remains in place, then retighten the screw.

Are there any specific warnings regarding the mounting surface for the Whale Bilge IC system?

Yes, there are important warnings regarding the mounting surface:

The mounting surface must have a minimum thickness of 19 mm (¾") to securely fasten the unit with the supplied screws. It is imperative not to screw the pump directly to the boat hull. It must be mounted on a bulkhead or an additional board.