XSONIC Airmar B175H-W (12°)

This XSONIC Airmar B175H-W (12°) transducer has a power output of 1 kW, making it effective for fish detection and detailed bathymetry.

The XSONIC Airmar B175H-W (12°) transducer operates on a high-frequency CHIRP band ranging from 150 to 250 kHz. This represents a total bandwidth of 100 kHz.

This transducer can reach a maximum depth of 152 meters (500 feet), making it suitable for various fishing applications.

The XSONIC Airmar B175H-W (12°) transducer integrates fast-response depth and water temperature sensors.

This transducer has a constant 25° beam, providing coverage under the boat twice that of traditional narrow-beam transducers.

CHIRP High-Wide technology offers several key advantages:

Superior resolution and improved target separation for clear sonar images. The ability to detect fish in the water column with high detail. Wider coverage under the boat thanks to its constant 25° beam. Better detection of haloclines and thermoclines. Improved signal-to-noise ratio, enabling fish finding and bottom tracking even at high boat speeds.

Yes, due to its ability to cover a wide bandwidth and detect fish with high detail, this transducer is suitable for both coastal and pelagic fishing.

The transducer is supplied with a 10-metre (33-foot) cable.

The XSONIC Airmar B175H-W (12°) transducer weighs 5.17 kg.

The "Tilted Element" design means the ceramic elements inside the housing are permanently angled to compensate for the hull’s deadrise angle. This ensures the sonar beam is directed straight down, maximizing echo returns without requiring fairing.

The XSONIC Airmar B175H-W (12°) transducer, with a bronze housing, is recommended for fiberglass or wood hulls.

This specific model has a 12° tilted element. It is designed to compensate for deadrise angles ranging from 8° to 15°, ensuring the sonar beam is vertically oriented.

For installing this transducer on a fiberglass or wooden hull, a 95 mm (3-3/4 in) mounting hole is required.

For optimal performance, the transducer must be installed:

In an area where the water flow under the hull is smooth, with minimal bubbles and turbulence. Fully submerged in water at all times. With an unobstructed beam (not blocked by the keel or propeller shafts). Away from sources of electrical or mechanical interference (propeller, engine, other sounders). In an accessible location inside the boat, with a minimum of 178 mm (7 inches) of space for housing and clamping.

CHIRP transducers generate more heat than traditional transducers. It is therefore crucial to install them in a cool, well-ventilated location, away from the engine compartment or other heat sources. Never operate the transducer out of the water, as this could cause overheating and failure.

The arrow on top of the transducer must point toward the keel or the centerline of the boat. This orientation ensures the internal element is correctly aligned with the hull angle.

Yes, it is possible to apply an antifouling coating such as Foulfree. Airmar certifies that applying this type of coating does not result in any loss of transducer performance.

No, this transducer has a bronze housing and must never be installed on an aluminum hull. This would cause electrolytic corrosion.

This transducer is optimized for CHIRP systems. It is compatible with Lowrance fishfinder systems and other brands in the Navico group that support CHIRP technology.

The XSONIC Airmar B175H-W (12°) transducer is equipped with a 9-pin connector.