XSONIC Airmar TM260

The XSONIC Airmar TM260 is a 1 kW RMS transom-mount transducer offering depth and temperature sensing. It operates on two frequencies, 50 kHz and 200 kHz, and is designed for offshore fishing and deep-water detection.

The TM260 transducer uses two frequencies:

At 50 kHz, it provides a wide 19° beam for deep-water detection, with a maximum range up to 800 meters (2600 feet). At 200 kHz, it uses a narrow 6° beam for targeted resolution, enabling precise detection of fish and underwater structures up to 294 meters (1000 feet).

Yes, the XSONIC Airmar TM260 transducer includes a fast-response water temperature sensor, providing accurate real-time readings.

The TM260 transducer is housed in a seamless SEALCAST™ urethane casing, ensuring robustness and durability in marine environments.

Yes, the TM260 is mounted on a stainless steel bracket with a "kick-up" function. This bracket is designed to lock in the raised position in case of impact, helping to prevent damage to the transducer.

The XSONIC Airmar TM260 transducer has an RMS power of 1 kW (1000 Watts), giving it excellent deep-penetration and detection capabilities.

The TM260 transducer comes with a 10 m cable.

The XSONIC Airmar TM260 transducer is designed for transom-mounted installation. It is supplied with a stainless steel bracket for this installation.

The TM260 transducer is designed to provide stable performance at speeds up to 30 knots (approximately 55 km/h or 35 MPH).

Yes, to optimize performance, it is recommended to choose a location away from interference sources such as propellers, propeller shafts, other machinery, other fishfinders, and other cables. The water under the hull must be smooth, with minimal bubbles and turbulence, especially at high speed.

Yes, to ensure proper operation, the transducer must remain continuously immersed in water at all sailing speeds of the boat.

The TM260 transducer is equipped with a 9-pin connector for connection to compatible equipment.

The XSONIC Airmar TM260 transducer is compatible with boats equipped with outboard or inboard/outboard engines. It is designed for transom mounting.

The TM260 transducer can be installed on boats with a deadrise angle up to 28°, while maintaining optimal performance.

Yes, the XSONIC Airmar TM260 is a hardware accessory compatible with Lowrance sonar/depth sounder systems.

Yes, Airmar certifies that applying the Foulfree coating does not affect the transducer’s performance. Foulfree is a non-toxic, long-lasting antifouling solution.

Once applied, the Foulfree coating can protect the transducer for up to two years. A 15 ml tube of Foulfree covers approximately 0.09 m² (one square foot) of surface area.

No, it is not recommended to install a transducer with a plastic housing (such as the urethane of the TM260) in a wooden hull. Wood swelling could potentially crack the plastic housing and compromise waterproofing.

Yes, it is essential to apply a layer of marine sealant approximately 2 mm (1/16") thick around the flange and on the side of the housing. The sealant must extend beyond the combined thickness of the hull, washer, and nut to ensure a perfect seal and keep the nut in place.

The XSONIC Airmar TM260 transducer is designed to operate on two distinct frequencies to optimize detection based on conditions:

At 50 kHz: It uses a wide 19° beam, ideal for deep-water detection. Its maximum range can reach up to 800 meters (2600 feet). At 200 kHz: It provides a narrow 6° beam, enabling targeted resolution and precise detection of fish and underwater structures up to 294 meters (1000 feet). This transducer also integrates a fast-response water temperature probe.