Câbles Ethernet/réseau UTP SLIM CAT6 28AWG bleu 10FT

10FT Blue UTP Slim CAT6 28AWG Ethernet/Network Cables

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 10%

Amphenol

MP-64RJ4528GB-010

10FT Blue UTP Slim CAT6 28AWG Ethernet/Network Cables

UTP SLIM CAT6 28AWG Ethernet/network cables, blue, 10FT for data or Ethernet connections aboard, compatible with AMPHENOL installations. Length: 10 ft.

Retail priceBenefit from the professional rate

15,95€

15,95€ ~~17,72€~~

Shipping calculated at checkout.

Prices shown excluding VAT for United Arab Emirates. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Low stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Connector type	RJ45
Cable segment	Marine data network / Ethernet
Cable type	Cat6 Ethernet cable
Compatibility Scope	Exact reference of the equipment to verify before ordering
Environment	Marine installation
Installation Advice	plan separate routing for high-power cables and avoid tight bends
Installation Check	the connector type, network category, and usable length between devices
Length	10 ft
Length Ft	10
Network protocol	Ethernet
Product Usage	Battery bank
Skysat Usage	data or Ethernet connection onboard

Detailed description

UTP SLIM CAT6 28AWG blue Ethernet/network cables 10FT are Ethernet cables designed for data or Ethernet connections aboard. They complement an existing installation or replace a worn cable while maintaining a reference compatible with marine electronics.

This sheet belongs to the Marine Data Network/Ethernet category. Length indicated: 10 ft. Connectivity: RJ45. Signal or protocol: Ethernet. Compatibility must be confirmed with the exact AMPHENOL equipment before ordering.

For reliable installation, route cables away from high-power lines and avoid tight bends. Also check the connector type, network category, and usable length between devices before sealing cable passages.

Documentation

Type	Nom
	MP_64RJ4528GX-2634485 (4).pdf

Expert opinion

Pol CONIN

Digital Manager

« Review Skysat - UTP SLIM CAT6 Ethernet/network cables 28AWG blue 10FT »

Skysat tip: select this cable starting from the device to be connected, not just based on available length. Check the connector, pinout, and actual routing inside the boat before ordering.

When the cable runs through the mast, coachroof, or a damp area, leave a service loop, protect the connections, and avoid intermediate splices. This prevents many difficult diagnostics after installation.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

10FT Blue UTP Slim CAT6 28AWG Ethernet/Network Cables

15,95€

15,95€ ~~17,72€~~

Frequently Asked Questions

Need help? Contact us

What is the purpose of UTP SLIM CAT6 28AWG blue 10FT Ethernet/network cables?

UTP SLIM CAT6 28AWG blue 10FT Ethernet/network cables are used for the following function: data or Ethernet connection on board. They are intended for installations where you want to maintain a reference suited to the equipment rather than an approximate cable.

Which equipment is it compatible with?

Compatibility depends on the exact AMPHENOL device reference. Before ordering, check the connector, pinout, and documentation of the equipment to be connected. Identified cabling: RJ45.

What needs to be checked before installation?

Check the connector type, network category, and usable length between the devices. Also plan for the actual cable routing, bulkhead penetrations, and service margins at the ends.

How to install it cleanly on board?

plan separate routing for high-power lines and avoid tight bends. Connectors must not be under tension, and exposed joints must be protected from moisture.

Does the specified length always suffice?

The indicated length is 10 ft. Measure the actual passage on the boat before ordering, adding the necessary margin for bends, drops, and service loops.

Why choose an OEM reference?

A manufacturer reference reduces the risk of wiring errors, connector mismatches, or signal level issues. This is particularly important for AMPHENOL connections, radar, antenna, marine data bus, or data links.