Side Entry CableClam with Stainless Steel Dress Cap - Side Entry CableClam with Stainless Steel Dress Cap

Side Entry CableClam with Stainless Steel Dress Cap - Cutaway Drawing

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 19%

Blue Sea Systems

1007100-BSS

Side-entry CableClam cable gland with stainless steel finishing cap

Designed for discreet and watertight cable management, the CableClam Blue Sea with side entry provides a robust solution. Featuring a stainless steel cap, it ensures a neat finish and lasting protection for your marine installations. Included: a stainless steel cap, a compression ring, and a gasket.

Retail priceBenefit from the professional rate

15,48€

15,48€ ~~19,05€~~

Shipping calculated at checkout.

Prices shown excluding VAT for United Arab Emirates. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Maximum cable diameter (mm)	7.11
Maximum connector diameter (mm)	25.4
Mount type	Low Profile
Material	Stainless steel 316 (cap), UV-stabilized thermoplastic (ring), UV-stabilized Buna-N rubber seal
Splittable	No
Cover material	Stainless steel
Gasket included	Yes
Gasket material	Rubber
Height	15.51
Length (mm)	56.80
Mounting Screw Size Imperial	#8
Product type	Cable gland
Width	56.80

Detailed description

Designed for clean and secure cable management, the CableClam with side entry and stainless steel cap from Blue Sea Systems is a dedicated solution for cable passes on ship decks. This model features a design that allows for lateral cable routing, optimizing deck integration and reducing bending stress for enhanced cable durability.

Design and dimensions

The CableClam has compact dimensions of 56.80mm (2.24in) in length. It is secured using mounting holes designed for #8 screws, ensuring stable and reliable installation on the chosen surface.

Positioning and advantages

This Blue Sea CableClam model is an alternative to traditional cable glands, particularly advantageous when a cable exit parallel to the mounting surface is desired. The stainless steel cap not only adds an aesthetic touch but also provides superior resistance to UV and corrosion compared to all-plastic versions, positioning this CableClam as a durable option for demanding marine environments. It complements the Blue Sea Systems range by offering a discreet and robust solution for deck lighting cables, sensors, or antennas, where other models in the range, such as top-entry CableClams, would be less suitable for routing along the surface.

Documentation

Type	Nom
	EN - Dimensioned Drawing - Side Entry CableClam with Stainless Steel Dress Cap
	EN - Instructions - Side Entry CableClam with Stainless Steel Dress Cap

Expert opinion

Pol CONIN

Digital Manager

« Technical analysis: CableClam Blue Sea, cable management and marine aesthetics »

This Blue Sea Systems CableClam with side entry is a critical component for any marine installation requiring careful cable management on deck. Its practical value is clear for both sailboats and powerboats, where aesthetics and discretion are paramount. It is ideal for routing deck lighting cables, mast sensors, or antenna cables along a surface, preventing excessive bends that could damage insulation or conductors over time.

Installation is straightforward: after precise drilling for #8 mounting screws, the compression ring and gasket ensure effective sealing against water ingress. The stainless steel cap, which clips onto the assembly, provides a clean finish and enhanced protection against the elements, a clear advantage over all-plastic cable glands. This model is distinguished by its side orientation, allowing smoother integration in setups where cables must follow horizontal lines or existing structures on deck. It is not, however, designed for very large-diameter cable bundles or multiple passes requiring higher volumetric capacity. It excels in single or double moderate-sized cable applications, where its robustness and metallic finish provide real added value.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Side-entry CableClam cable gland with stainless steel finishing cap

15,48€

15,48€ ~~19,05€~~

Frequently Asked Questions

Need help? Contact us

How to correctly install the Blue Sea CableClam cable gland?

To install the CableClam, follow these steps:

Pass the cable through the central hole of the gasket.
Insert the cable into the groove of the deck ring.
Secure the deck ring and gasket to the surface by tightening each screw a few turns at a time. Do not overtighten the screws.
Press the stainless steel cap onto the assembly, aligning the cap's groove with the cable.

What is the advantage of the stainless steel cap on this CableClam model?

The stainless steel cap provides superior resistance to UV and corrosion compared to fully plastic versions. It also adds an aesthetic touch and ensures increased durability in demanding marine environments.

What type of screw is required to mount the CableClam to the surface?

The CableClam mounting holes are designed for #8 screws. It is important not to overtighten the screws during installation to avoid damaging the product or the mounting surface.

How is the side-entry CableClam different from traditional cable glands?

This side-entry CableClam routes cables parallel to the mounting surface, optimizing deck integration and reducing cable bend stress. Traditional cable glands often have a cable exit perpendicular to the surface.

Is the CableClam suitable for marine use?

Yes, the CableClam is designed for marine environments. Its stainless-steel cap provides superior resistance to UV and corrosion, making it a durable and robust solution for ship decks.

Are there any precautions to take when tightening screws during installation?

Yes, it is important not to overtighten the screws when securing the deck ring and gasket to the surface. Tighten each screw a few turns at a time until it is secure, but without applying excessive force.