CableClam with Stainless Steel Dress Cap 0.68" - CableClam with Stainless Steel Dress Cap 0.68

CableClam with Stainless Steel Dress Cap 0.68" - Cutaway Drawing

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 19%

Blue Sea Systems

1001100-BSS

CableClam cable gland with stainless steel finishing cap 0.68"

The Blue Sea CableClam 1001100-BSS ensures watertight deck penetration. Designed with a stainless steel cap, it provides a discreet and corrosion-resistant finish, ideal for marine environments. This cable gland includes the deck ring, sealing gasket, split rubber gasket, compression ring, and stainless steel cap.

Retail priceBenefit from the professional rate

25,15€

25,15€ ~~30,95€~~

Shipping calculated at checkout.

Prices shown excluding VAT for United Arab Emirates. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Maximum cable diameter (mm)	7.87
Maximum connector diameter (mm)	17.27
Mount type	Low Profile
Material	Stainless steel 316 (cap), UV-stabilized thermoplastic (ring), UV-stabilized Buna-N rubber seal
Splittable	Yes
Cap Material	Stainless steel
Corrosion resistance	Yes
Gasket material	Rubber
Height above deck	22.61
Height Without Cover Mm	21.31
Mounting Screw Size Imperial	#6
Overall height mm	22.61
Overall length mm	49.83
Overall width mm	49.83
Product type	Cable gland

Detailed description

The BLUE SEA CableClam with 0.68" stainless steel cap, part number 1001100-BSS, is designed for sealing cable penetrations through marine decks or bulkheads. This model includes a stainless steel cap for a clean aesthetic finish.

Design and dimensions

This cable gland consists of a deck ring, a sealing gasket, a split rubber grommet, a compression ring, and a stainless steel cap. Overall dimensions are 49.83 mm (1.96") in length, with a height of 22.61 mm (0.89") including the cap. Mounting points accommodate #6 screws. The CableClam 1001100-BSS is engineered for applications where corrosion resistance and a low-profile design are priorities, compared to bulkier or fully plastic cable glands.

Installation and sealing

The CableClam is designed for reliable sealing. The split rubber grommet, whose opening can be drilled to match the cable diameter, is inserted into the compression ring. The assembly is then screwed into the deck ring, ensuring uniform compression of the gasket. The stainless steel cap is then fitted over the assembly, protecting the fasteners and providing a clean finish. This method effectively prevents water ingress for cables passing through the mounting surface.

Documentation

Type	Nom
	EN - Dimensioned Drawing - CableClam with Stainless Steel Dress Cap 0.68in
	EN - Instructions - CableClam with Stainless Steel Dress Cap 0.68in

Expert opinion

Pol CONIN

Digital Manager

« Waterproof cable gland BLUE SEA: stainless steel integration for 0.68" cables »

The BLUE SEA CableClam with a 0.68" stainless steel cap is a top choice for professionals concerned with clean cable penetrations and watertight integrity on exposed surfaces. This model stands out with its stainless steel finish, offering better resistance to marine elements and a superior aesthetic compared to standard plastic cable glands. It is particularly well-suited for VHF, GPS, or certain sensor cables. Its low profile minimizes snagging risks and blends discreetly on decks or superstructures.

The main advantage of this CableClam is its easy installation without requiring connector removal. The split rubber grommet allows side insertion of the cable, greatly simplifying the process—especially in tight spaces. It is critical to ensure the hole cut in the grommet matches the cable’s exact diameter to guarantee optimal watertightness. This type of cable gland is ideal for sailboat or powerboat owners seeking a durable and visually pleasing solution, but it is not suitable for multiple cable bundles or very large-diameter cables, for which junction boxes or multi-cable gland plates would be more appropriate.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

CableClam cable gland with stainless steel finishing cap 0.68"

25,15€

25,15€ ~~30,95€~~

Frequently Asked Questions

Need help? Contact us

What materials is the CableClam made of?

The CableClam consists of a stainless steel cap, a split rubber gasket, a deck ring, and a compression ring. These components work together to ensure watertight integrity and durability.

How to install the CableClam to ensure reliable watertightness?

Installing the CableClam involves several steps to ensure optimal watertightness:

Check if the pre-punched rubber gasket fits snugly around your cable. If necessary, drill a hole in the gasket for a precise fit. Slit the rubber gasket from its edge to the drilled hole. Secure the deck ring and its gasket to the mounting surface. Feed the cable end through the stainless steel cap. Slide the compression ring onto the cable, insert the cable through the slit in the gasket, then press the gasket into the compression ring. Screw the compression ring to the deck ring, tightening each screw progressively without over-tightening. Press the stainless steel cap onto the assembly for a clean finish.

What is the role of the stainless steel cap on this CableClam?

The stainless steel cap has multiple functions. It provides an aesthetic finish above the assembly, protects the fastenings from external elements, and contributes to a clean and discreet installation on the deck or bulkhead of your boat.

How to adjust the rubber gasket so it fits perfectly around my cable?

To adjust the rubber gasket, first determine whether the pre-drilled hole provides a tight fit on your cable. If not, drill a hole in the gasket that ensures a tight fit with your cable’s diameter. Then, slit the gasket from its edge to the hole you drilled to insert the cable.