Sonde TA plastique HD-ID 500W (77/200kHz) et ClearVü™ 500W (455/800 kHz) + température - (8 broches) - Garmin image 1

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 11%

Garmin

010-01960-01

HD-ID / ClearVü plastic through-hull transducer 8-pin

The Garmin 010-01960-01 transducer is an 8-pin versatile transducer optimized for freshwater fishing, featuring HD-ID™ traditional sonar (77/200 kHz, 500W) and ClearVü™ CHIRP (455/800 kHz, 500W) technologies with an integrated temperature sensor. Ideal for compatible Garmin chartplotters, it provides clear visualization of fish and underwater structures down to 579 meters in traditional mode and 228 meters in ClearVü. This product ships with a mounting kit for transom or electric motor installation.

Retail priceBenefit from the professional rate

118,58€

118,58€ ~~132,50€~~

Shipping calculated at checkout.

Prices shown excluding VAT for United Arab Emirates. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Supported sonar technologies	Traditional sonar (HD-ID), ClearVü (DownVü)
Fishfinder frequencies	77/200 (Traditional), 455 (CHIRP ClearVü), 800 (CHIRP ClearVü)
Peak power	500.0
Max depth reading	579.0
Transducer material	Plastic
Sonar connector type	8-pin
Integrated temperature sensor	Yes
Compatible displays	Garmin ECHOMAP 50dv, 70dv, GPSMAP 5x7, 8x0, 10x0, 7600xsv Series, GSD 24, GSD 25, ECHOMAP 50s and other Garmin 8-pin devices compatible with traditional sonar and ClearVü.
Mounting type	Transom, Electric Motor
Beam coverage angle	Traditional: 45°/15°, ClearVü: 2.5°x53° (455 kHz), 1.6°x29° (800 kHz)
CHIRP high frequency	800-840
CHIRP low frequency	435-475
Clearvu Power W	500
Deadrise Angle Compensation	Adjustable via mount
Fishing type	Lake, River
Integrated speed sensor	No
Max Depth Traditional Sonar M	579
Mounting hardware included	Yes
Operating Temperature Range C	-15 to 70
Peak Power W	500
Power Supply Voltage Range V	10-32
Release year	2017.0
Sonar Connector Gender	Male
Storage Temperature Range C	-40 to 85
Transducer Form Factor	Single-element

Detailed description

Designed specifically for freshwater fishing, the Garmin 010-01960-01 transducer is a versatile solution for boaters seeking precise detection capabilities. This model integrates both traditional HD-ID™ sonar and ClearVü™ scanning technology, providing detailed visualization of structures and fish beneath the vessel. Its design allows flexible installation on the transom or an electric motor.

Detailed Sonar Performance

The Garmin 010-01960-01 transducer delivers 500 W of power for its traditional HD-ID™ sonar, operating at frequencies of 77/200 kHz with beam widths of 45° and 15° respectively. This configuration achieves a maximum depth of 579 m (1,900 ft), providing clear fish arches and distinct target separation. Complementing this, the ClearVü™ scanning sonar operates at 500 W using CHIRP frequencies of 455 kHz (435–475 kHz) and 800 kHz (800–840 kHz). Beam widths of 2.5°×53° at 455 kHz and 1.6°×29° at 800 kHz enable detection of objects and structures down to 228 m (750 ft), offering near-photographic imagery of the seabed. A fast-response integrated temperature sensor completes these features, providing essential data for fishing condition analysis.

Installation and Connectivity

The transducer features a 6 m (20 ft) cable and an 8-pin connector, ensuring compatibility with compatible Garmin chartplotters and displays. Its design allows transom mounting at angles from 0° to 70° or installation on an electric motor. The included mounting kit facilitates installation across various boat configurations. Compared to single-band or traditional-only transducers, this model offers a balanced option combining classic fish detection with detailed seabed visualization, without reaching the capabilities of side-scanning (SideVü) or complex "all-in-one" transducers like the GT50 or GT52 series, nor the deep-water performance of dedicated CHIRP transducers. It is optimized for freshwater environments, where its frequency ranges and depth capabilities are most effective.

Documentation

Type	Nom
	Gabarit de montage - Gabarit de montage GT (EN)
	Notice d'installation - Guide de placement de la sonde (EN)
	Notice d'installation - Instructions d'installation sonde tableau arrière/moteur électrique (EN)

Expert opinion

Pol CONIN

Digital Manager

« Analysis of the Garmin HD-ID and ClearVü 500W depth sounder for freshwater »

The Garmin 010-01960-01 transducer is a relevant solution for recreational boaters and freshwater anglers seeking an effective compromise between traditional detection and structural visualization. Its dual HD-ID beams (77/200 kHz) reliably detect fish schools and arches, while the ClearVü technology (455/800 kHz) provides near-photographic imaging of submerged structures, deadwood, and bottom variations. This combination is particularly useful for identifying fish-holding zones in moderate depths typical of lakes and rivers.

Installation on the transom or electric motor is a major asset for flexibility. For transom mounting, it is critical to follow Garmin’s positioning recommendations relative to the propeller and hull-generated turbulence. A 38 cm (15 in) offset from the propeller is recommended, along with installation on the starboard side if the propeller rotates clockwise, or port side if it rotates counterclockwise, to ensure clean water flow for the sonar signal. For electric motor mounting, cable routing must be done carefully to avoid pinching during motor deployment or stowage. Although designed for relatively straightforward installation, precise positioning is key to achieving the optimal performance promised by these sonar technologies. This model is well-suited to small to mid-sized boats operating at moderate speeds, where clean water-flow requirements can be more easily met than at high speeds.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

HD-ID / ClearVü plastic through-hull transducer 8-pin

118,58€

118,58€ ~~132,50€~~

Frequently Asked Questions

Need help? Contact us

Which sonar technologies does this Garmin sounder use?

This Garmin transducer integrates two distinct sonar technologies:

The traditional HD-ID™ sonar, which provides clear fish arches and excellent target separation.The ClearVü™ scanning technology, which delivers near-photographic images of structures and fish beneath the vessel.

What are the frequencies and power outputs of the traditional HD-ID™ sonar?

The HD-ID™ traditional sonar of this sounder operates at 500 W power on 77 kHz and 200 kHz frequencies. The corresponding beam widths are 45° for 77 kHz and 15° for 200 kHz.

What are the frequencies and power ratings of the ClearVü™ scanning sonar?

The ClearVü™ scanning sonar of this sounder uses 500 W of power on CHIRP frequencies of 455 kHz (range 435–475 kHz) and 800 kHz (range 800–840 kHz). Beam widths are 2.5°×53° at 455 kHz and 1.6°×29° at 800 kHz.

What is the maximum detection depth for HD-ID™ and ClearVü™ technologies?

The traditional HD-ID™ sonar can reach a maximum depth of 579 metres (1,900 feet). The ClearVü™ scanning sonar can detect objects and structures down to 228 metres (750 feet) in depth.

Does this transducer measure water temperature?

Yes, this transducer is equipped with an integrated fast-response temperature sensor that provides water temperature data.

For which type of fishing environment is this depth sounder primarily designed?

This transducer is specifically designed for freshwater fishing, providing precise detection capabilities suited to this environment.

What is the connector type of this Garmin transducer?

This transducer has an 8-pin connector, ensuring compatibility with compatible Garmin displays.

What are the possible mounting types for this transducer?

This transducer is designed for versatile installation. It can be mounted on the transom of your boat or on an electric motor (trolling motor).

Which tools are required for installation on the transom?

For installation on the transom, you will need the following tools:

A #2 Phillips screwdriverA drillBits: 4 mm (5/32 in), 3.2 mm (1/8 in), and 25 mm (1 in)Masking tapeMarine sealant

How to choose the best location for installing the depth sounder on the transom?

For optimal performance, the transducer must be mounted parallel to the waterline and extend 3.5 mm (0.125 in) below a fiberglass hull or 10 mm (0.375 in) below an aluminum hull. It should be placed as close as possible to the centerline of the transom, at least 38 cm (15 in) from the propeller, and away from any turbulence sources (strakes, fittings, water intakes).

How to avoid interference with the sonar signal?

To reduce interference, run the transducer cable away from ignition wires, batteries and service wiring, trolling motor batteries and wiring, and high-energy wires (radar, audio amplifier, autopilot pump). If the transducer cable must cross a power cable, cross them at 90 degrees.

Should antifouling paint be applied to the depth sounder?

Yes, if your boat spends a lot of time in the water, it is recommended to lightly sand the transducer and mounting hardware with a fine abrasive pad, clean them with isopropyl alcohol, then apply a water-based antifouling paint to prevent marine growth.

What diameter hole is required to pass the cable through the transom?

If you use the 8-pin cable of this transducer, you will need to drill a 25 mm (1 inch) diameter hole through the transom for the cable to pass through. Ensure you apply marine sealant to seal the hole.

Does cutting the depth sounder cable void the warranty?

Yes, it is important not to cut the transducer cables, as this would void the warranty on your product.

How to test the transducer installation on the transom?

After installation, launch the boat and power on the display unit. Drive slowly, then gradually increase speed while monitoring the display. If the sonar signal is lost or degraded, note the speed. Adjust the transducer depth in small increments (about 3 mm / 1/8 in) if the signal improves when turning, or relocate the transducer as needed.

Is this transducer compatible with all hull materials?

Yes, transom-mounted transducers like this one are compatible with all hull materials. They require constant contact with the water and are mounted externally on the transom.

Do I need to update the software of my Garmin display after installing this transducer?

Yes, it is necessary to update the software of your Garmin display when installing this transducer to ensure compatibility and optimal performance.

How to install the transducer on an electric trolling motor?

For installation on an electric motor, attach the mounting bracket to the transducer using the provided screws and star washers. Route the cable through the bracket to a suitable cable exit to prevent pinching. Then secure the bracket to the electric motor body with cable ties, positioning the transducer parallel to the bottom and securing the cable along the motor shaft with waterproof tape.