Light Bar, Curved Light Bar, 20" - Garmin image 1

Light Bar, Curved Light Bar, 20" - Garmin image 2

Light Bar, Curved Light Bar, 20" - Garmin image 3

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 12%

Garmin

010-04462-00

Curved 20-inch LED light bar

The Garmin Lumishore curved 20" (010-04462-00) marine LED bar delivers 15,000 lumens (5000 K) with a wide beam (9°-20°). Rated IP68 and powered by 10.5-31 VDC, it suits harsh marine environments and offers flexible control via a switch or compatible MFD (with additional module). Part of the Lumishore curved LED bar range, it balances power and compact dimensions. Includes: (1) LED bar, (6) M6x40mm bolts, (16) M6 flat washers, (4) M6x16mm bolts, (4) M6 nylon washers, (2) brackets, (2) flat plates, (6) M6 spring washers, (6) M6 nylon nuts, (2) drilling templates.

Retail priceBenefit from the professional rate

846,40€

846,40€ ~~958,33€~~

Shipping calculated at checkout.

Import duties and taxes are payable by you on delivery.

Prices shown excluding VAT for United Arab Emirates. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Awaiting restock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Product subtype	Light bar
Installation type	On bracket
Operating voltage range	10.5-31
Typical power consumption	153.6
Lumens output	15000.0
Beam angle	20.0
Color temperature	5000.0
Light color	White
External diameter (mm)	9.5
Housing material	Powder-coated aluminium
Color / finish	Black
Ingress protection	IP68
Dimmable	Oui
Adjustable beam	Oui
Expected lifespan (hours)	50000.0
Led Power Per Unit W	10
Light Bar Depth Mm	96
Light Bar Height Mm	92
Light Bar Length Mm	498
Number Of Leds	40
Overall Depth With Bracket Mm	96
Overall Height With Bracket Mm	109.5
Overall Width With Bracket Mm	573
Product Length Inches	20
Raw Lumens	33750

Detailed description

Designed to provide powerful and wide-area illumination, the Garmin Lumishore 20-inch curved light bar (part number 010-04462-00) is a versatile marine lighting solution. With 40 white 10 W LEDs, it delivers a luminous flux of 15 000 lumens (equivalent to 33 750 raw lumens) at a color temperature of 5000 K. Its "letterbox" beam pattern (9°-20° vertical-horizontal) ensures broad, targeted coverage, ideal for T-tops, helm roof canopies, fishing towers, and foredecks.

Design and Technical Performance

This light bar operates on a voltage range of 10.5 to 31 VDC, with a maximum current draw of 12.8 A at 12 V. Its design prioritizes marine durability, featuring an IP68 dust and immersion rating, a powder-coated aluminum body, and a Makrolon lens. LED lifespan is rated at over 50 000 hours, and the product includes a 3-year warranty. Dimensions, including the stainless-steel bracket, are 22.56" (width) x 4.31" (height) x 3.78" (depth). This 20-inch model sits as an intermediate option in the Garmin Lumishore curved light bar range, which also includes 30-, 40-, and 50-inch versions, offering a balance between power and footprint for various onboard applications.

Control Flexibility and Integration

The Lumishore 20-inch light bar provides multiple control options to suit your vessel’s configuration. It can be operated via a simple on/off switch or a momentary switch. For deeper integration, it is compatible with a Garmin multifunction display (MFD), a Lumishore display, or a smart device, provided you use an ECLIPSE Command Center or EOS-LUX Command Center control module (sold separately). Installation has been streamlined: no bulky wiring harness or external relay is required for basic operation. Detailed instructions and a drilling template are supplied to simplify mounting and angle adjustment to prevent bow glare.

Documentation

Type	Nom
	Notice d'installation - Manuel d'installation Barre lumineuse incurvée 20" (EN)

Expert opinion

« Technical analysis of Garmin Lumishore curved 20" LED bar »

The Garmin Lumishore curved 20-inch deck light bar is a strategic deck lighting solution for many types of vessels, from sport fishing boats to cruising yachts. It provides wide and powerful illumination (15,000 lumens) essential for critical tasks such as night manoeuvres, deck work, or detecting floating objects. The dimmable function is particularly useful for adjusting light intensity to conditions and avoiding glare, a factor often overlooked.

Installing this model, though detailed in the manual, requires careful attention. The provided drilling template is an asset, but precise positioning to avoid 'bow glare' and rigorous application of marine sealant (e.g., 3M 4200) for cable pass-through sealing (9.5mm hole) are critical for long-term installation integrity. It is important to note that adjusting the angle after installation requires loosening all bolts, highlighting the need for careful initial adjustment.

This model stands out from basic deck lights with its power, marine-grade build quality (IP68, powder-coated aluminum, Makrolon lens), and integration options. While a simple switch suffices for basic operation, the ability to control it via a Garmin MFD or smart device (with the addition of an ECLIPSE or EOS-LUX Command Center module) offers significant flexibility for modern onboard systems. This integration enables centralized lighting management, a notable advantage for complex installations. The choice of size (20 inches here) is a relevant compromise for medium to large boats, where mounting space is available and extended light coverage is needed without the bulk of 40- or 50-inch models.

It should be noted that using advanced control functions via an MFD requires purchasing additional modules, which must be budgeted for. Additionally, its 12.8 A draw at 12 V demands a dedicated electrical circuit and properly sized wiring and protections, in compliance with ABYC standards, to ensure operational reliability.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Curved 20-inch LED light bar

846,40€

846,40€ ~~958,33€~~

Frequently Asked Questions

Need help? Contact us

What is the luminous output of the Garmin 20-inch curved LED bar?

The Garmin 20-inch curved LED bar is equipped with 40 white 10 W LEDs. It delivers an effective luminous flux of 15 000 lumens, equivalent to 33 750 raw lumens.

What is the color temperature of the lighting on this LED strip?

The lighting of this LED bar has a color temperature of 5000 K, providing a clear white light.

What type of light beam does this Garmin LED bar produce?

This LED bar produces a "letterbox" beam pattern, with a 9° vertical and 20° horizontal coverage. This beam type provides wide and targeted illumination.

What are the dimensions of the Garmin 20-inch LED bar with its mounting bracket?

The dimensions of the LED bar, including the stainless steel bracket, are as follows:

Width: 22.56 inches (approx. 57.3 cm)Height: 4.31 inches (approx. 10.9 cm)Depth: 3.78 inches (approx. 9.6 cm)

Which materials are used to manufacture this LED bar to ensure marine durability?

To ensure durability in a marine environment, the LED bar is fitted with a powder-coated aluminum body and a Makrolon lens. It also features an IP68 protection rating.

What is the estimated lifespan of the LEDs in this light bar?

The LED lifespan of this LED strip is estimated at over 50,000 hours of use.

Is this LED bar waterproof and dustproof?

Yes, this LED bar has an IP68 protection rating, meaning it is fully protected against dust and can withstand prolonged immersion in water.

Who is qualified to install the Garmin LED bar?

Installation, inspection, and maintenance of this product must be performed only by a qualified electrician, in accordance with all applicable electrical codes.

What is included in the package for the installation of the light bar?

The package includes the following items:

1 curved LED bar6 M6 x 40mm hex bolts16 M6 flat washers4 M6 x 16mm hex bolts4 M6 nylon washers2 brackets2 spreader plates6 M6 spring washers6 M6 nylon threaded inserts2 drilling templates for brackets

What hole diameters are required for mounting the light bar?

For mounting M6 bolts, it is recommended to drill a pilot hole of 4 mm, followed by a final drilling diameter of 6.5 mm.

What is the recommended tightening torque for the side bolts of the LED bar?

Once the light angle is adjusted, the bolts on the sides of each bracket can be tightened to a final torque of 8 Nm.

Is a sealant required when installing mounts?

Yes, it is strongly recommended to use a marine sealant (such as 3M 4200) inside and around mounting holes to ensure watertight integrity.

What diameter hole should be drilled for the power cable passage?

A 9.5 mm diameter hole must be drilled for the cable passage. The cable entry must be sealed with marine sealant, and the use of a cable gland is recommended.

How to prevent the bow from blinding the helmsman when positioning the light bar?

To avoid bow glare, temporarily assemble the mounts on the light bar and position it. Use a taut string from the bow to the top of the light to adjust the angle until no light hits the bow. Once the ideal angle is found, mark it temporarily before final installation.