JL Audio M200 6.5" Marine Speakers, Sport Gray with LED (pair)
Import duties and taxes are payable by you on delivery.
Prices shown excluding VAT for United Arab Emirates. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.
Awaiting restock
Technical specifications
Technical specifications
| Speaker Diameter In | 6.5 |
| Audio Output Power Rms | 50 |
| Impedance | 4 |
| Audio Frequency Response | 55 Hz to 20 kHz |
| Audio Sensitivity Db | 87 |
| Speaker Tweeter Type | Silk dome |
| Led Lighting | Oui |
| Rgb Color Select | Yes |
| Mounting Diameter | 127.5 |
| Mounting Depth | 72 |
| IP rating | IPX6 |
| Color | Gray |
| Compatible Lighting Controller | Garmin Spectra LED control module |
| Mounting Height Above Surface Mm | 32.8 |
| Mounting Surface Orientation Recommendation | Vertical in exposed zone (water or weather) |
| Mounting type | Flush-mounted |
| Overall diameter mm | 175.7 |
| Speaker Wire Gauge Awg | 16 |
Detailed description
Detailed description
Two marine M200 speakers with RGB lighting
The 010-04753-03 reference includes a pair of JL Audio M200 coaxial speakers with nominal size 6.5 inches, Sport gray grilles, and RGB LED lighting.
Audio and amplification
Each speaker accepts 50 W RMS into 4 ohms. Sensitivity is 87 dB at 1 W/1 m and frequency response is 55 Hz to 20 kHz (+/- 3 dB). Recommended amplification range is 30 to 100 W per channel. The cone is injection-molded polypropylene with mica fill; the tweeter is a 25 mm silk dome.
Mounting preparation
Cutout diameter is 127.5 mm and mounting depth is 72 mm. Outside diameter is 175.7 mm and the grille extends 32.8 mm in front of the mounting surface. Safe compass distance for this LED variant is 175 cm. The IPX6 rating applies to front-face protection when the speaker is properly installed. The rear, wires, and connections are not waterproof: they must remain protected from moisture. In areas exposed to water or weather, mount on a vertical surface. Outside the boat, choose a location well above the waterline.
Connecting the LEDs
Lighting operates on 10 to 14.4 V DC, with maximum consumption of 140 mA at 14.4 V DC per speaker. Garmin recommends a Spectra controller, sold separately. A static color can also be obtained by protected connection to a 12 V DC source.
A 500 mA fast-blow fuse is mandatory for each speaker, on the LED positive wire at the power source end, in a marine fuse holder. This protection remains mandatory with a controller. For direct connection, also use an isolation switch or circuit breaker. Use the provided harnesses and disconnect audio power before making connections.
Box contents
- Two speakers and two Sport gray grilles.
- Two six-pin waterproof connectors.
- Mounting screws and documentation.
Expert opinion
Expert opinion
« Skysat advice: protecting the stern and each LED circuit »
Your payment information and data are processed securely.
