Adapter for 1"1/4 ball socket type GPS, for CV7V ultrasonic wind transducers / vane anemometers

This is a mechanical accessory designed to allow the integration of CV7V ultrasonic wind transducers from LCJ CAPTEURS on standard 1"1/4 ball sockets, commonly used for GPS or VHF antennas.

It is used to attach the 30 cm aluminum oblique mount (ø12mm) supplied with the CV7V sensors to 1”1/4 ball-type fittings. This provides a flexible mounting solution, allowing the sensor to be installed in various locations on the boat, such as a mast, arch, or gunwale, using existing mounting systems.

The adapter is a component that connects the CV7V mount to an existing ball joint. It is usually sold separately and does not include the specific screws or bolts for the ball joint itself, nor the CV7V’s oblique mount, which is supplied with the sensor.

This adapter is specifically designed for the LCJ CAPTEURS CV7V ultrasonic wind transducer / vane anemometer range. It is not compatible with other sensor models that do not use the same mounting system.

The adapter is designed for use with 1"1/4 (one and a quarter inch) ball joints, which are standard mounts commonly used for GPS or VHF antennas on boats.

No, this adapter is specifically designed for 1"1/4 ball joints. Its diameter and design are not compatible with other ball joint sizes, which could compromise the safety and stability of the installation.

No, this adapter is specifically designed for the 30 cm slanted aluminum mount (ø12mm) supplied with LCJ CAPTEURS CV7V wind transducers/vane anemometers. It is not compatible with mounting systems from other brands or models.

Yes, absolutely. The adapter is designed to integrate perfectly with the 30 cm (ø12 mm) aluminum oblique mount supplied with the CV7V sensor, allowing it to be attached to a 1"1/4 ball joint.

No, this adapter is specifically designed for the CV7V range. The CV7 and CV7-C sensors have different mounting systems and are not directly compatible with this adapter.

Once the adapter is secured to the CV7V mount, the lower part of the adapter is designed to fit and lock onto a standard 1¼" ball joint. This is typically achieved via a clamping or screwing system specific to the ball joint used, ensuring a secure assembly.

The required tools are usually basic and may include Allen keys or screwdrivers, depending on the specific mounting system of your 1"1/4 ball joint and how the adapter attaches to the CV7V bracket. It is recommended to consult the CV7V sensor and ball joint installation manual.

This adapter provides great installation flexibility and can be used on various types of boats, including sailboats, powerboats, RIBs, or multihulls. It allows mounting the sensor on a mast, radar arch, gunwale, or any location equipped with a 1"1/4 ball joint.

Installation is generally straightforward and does not require advanced technical skills. However, a solid understanding of marine mounting principles and the use of appropriate tools are recommended to ensure secure and durable equipment mounting.

Yes, using a 1"1/4 ball joint generally allows adjustment of the sensor's orientation. The ball joint itself provides flexibility to tilt and rotate the sensor, which is crucial for optimal positioning of the wind transducer/vane anemometer and accurate measurements.

It is important to ensure all fastenings are properly tightened to prevent any movement of the sensor at sea. Also check that the sensor is positioned so it is not obstructed by other boat equipment, to ensure accurate wind measurements.

For optimal wind measurements, the sensor must be positioned in an unobstructed area, ideally high up, away from any obstructions (mast, sails, antennas, boat structures) that could disrupt airflow and skew readings. The adapter, via the ball joint, facilitates this positioning.